Introduction

The AcuRite Wall Clock Temperature 02413 is a stylish and functional timepiece that not only displays the time but also monitors indoor temperature and humidity levels. Featuring a large, easy-to-read display, this clock is perfect for any room in your home. Its sleek design complements various decor styles, while the built-in sensors ensure accurate readings. The AcuRite Wall Clock Temperature is priced at approximately $29.99.

Detailed Specifications 

• Display Type: LCD Display
• Time Format: 12/24 Hour Format
• Temperature Range: -20°F to 120°F (-29°C to 49°C)
• Battery Life: Up to 2 years with 2 AA Batteries
• Mounting Type: Wall Mountable
• Dimensions: 6.5 inches x 2 inches x 0.75 inches

Description

Temperature 02413 combines the functionality of a traditional clock with the added benefit of temperature monitoring. The sleek design features an easy-to-read LCD display that shows both the current time and temperature. The clock is wall mountable, making it a great option for those who want to keep their surfaces clutter-free. The included batteries ensure immediate use, and the long battery life reduces the need for frequent replacements. This product is perfect for anyone looking to add a practical and stylish element to their home or workspace.

Setup Guide

To set up the Acurite Wall Clock Temperature 02413, follow these steps:

1. Insert the two AA batteries into the battery compartment located on the back of the clock.
2. Adjust the time by using the buttons on the back of the clock. Follow the on-screen instructions to set the correct time and date.
3. Mount the clock on the wall using the included mounting hardware. Ensure it is secure and level.
4. Place the clock in the desired location and allow it a few minutes to stabilize and show accurate temperature readings.

Indoor or Outdoor Clock 

Set the time
by turning the dial on the back of the watch in either direction.

1. Installing or Replacing Batteries
   AcuRite recommends high quality alkaline or lithium batteries for optimum product performance. Heavy-duty or rechargeable batteries are not recommended.
   The clock must use lithium batteries in low temperature conditions. Cold temperatures may cause alkaline batteries to not function properly. Use lithium batteries in the clock for temperatures below -4ºF / -20ºC. Insert 1 AA alkaline or lithium battery into the battery compartment as shown. Follow the polarity diagram (+/-) in the battery compartment.

Do not hang in direct sunlight!

For the most accurate temperature reading, select a location that will not be exposed to direct sunlight or other direct heat sources.
Location for maximum accuracy
AcuRite sensors are sensitive to their surrounding environment. Proper placement of both the display unit and sensor is critical to the accuracy and performance of this product.
Keep away from heat sources.
Keep the clock away from heaters, air conditioners, chimneys, vents, asphalt and concrete (radiating surfaces).

Care & Maintenance 

Clock Care 

1. A soft cloth may be used to clean the clock, as needed. 
2. Do not use corrosive cleaners or chemicals on the clock. 
3. Always store the clock without a battery when not in use. 

Troubleshooting

If you encounter any issues with your Acurite Wall Clock Temperature 02413, here are some common problems and solutions:

• Inaccurate Temperature Readings: Ensure the clock is not placed near heating or cooling vents, fireplaces, or other heat sources. Also, make sure it is not exposed to direct sunlight.
• Incorrect Time Display: Check that the batteries are not weak or expired. If the issue persists, try resetting the clock by removing the batteries for a few minutes and then reinserting them.
• Display Not Turning On: Verify that the batteries are properly inserted and not dead.

Always refer to the user manual for detailed troubleshooting steps and follow all safety instructions to avoid damage to the device or injury.

One Year Warranty

At AcuRite, we proudly uphold our commitment  to quality technology. Chaney Instrument Co. warrants that all products it manufactures to  be of good material and workmanship, and to  be free of defects when properly installed and  operated for a period of one year from the  date of purchase. 

AcuRite Wall Clock Temperature 02413 Pros & Cons

Pros

• Multi-functional: Displays both time and temperature.
• Ease of Use: Simple setup and operation.
• Affordable: Priced competitively for its features.
• Long Battery Life: Up to 2 years with included batteries.
• Sleek Design: Fits well with modern decor styles.

Cons

• Limited Features: Does not include additional features like humidity or weather forecasts.
• No Digital Settings for Temperature Unit: Temperature is only displayed in Fahrenheit.
• No Backlight: Not suitable for dark environments without additional lighting.

Customer Reviews

Customers have generally praised the Acurite Wall Clock Temperature 02413 for its ease of use, accurate temperature readings, and modern design. However, some users have noted that it does not come with a backlight, which could be a drawback in darker settings. Overall, it is a reliable and practical addition to any room.

Common complaints include the lack of additional features such as humidity readings and the inability to switch between Fahrenheit and Celsius for temperature display.