Akaso Trace 1 Dash Camera D1PRO User Manual

Content

AKASO Trace 1 Dash Camera D1PRO Manual

Introduction to the AKASO Trace 1 Dash Camera D1PRO

The AKASO Trace 1 Dash Camera D1PRO is a dual-lens vehicle recorder designed to document the road ahead and the inside of the cabin at the same time. Its wide-angle front and interior cameras provide broad coverage for everyday driving, rideshare work, family travel, fleet monitoring, and incident documentation.

The front camera can record at up to 2K resolution when used alone or record at 1080p when dual-camera capture is enabled. The interior camera is designed for cabin monitoring and includes infrared-assisted night vision for improved visibility in low-light conditions. A combined viewing angle of up to 340 degrees helps reduce blind areas compared with a traditional single-lens dash cam.

Built-in Wi-Fi allows compatible smartphones to connect to the camera for reviewing, downloading, and managing recordings through the AKASO car camera app. An external GPS module can add route, speed, and location information to recorded footage. Loop recording continuously replaces the oldest unlocked files when the memory card becomes full, while the G-sensor helps protect footage after a detected impact.

This dash camera suits drivers who want front-and-cabin recording without installing separate devices. It is particularly useful for taxi and rideshare drivers, commuters, parents, and anyone who wants an accessible record of road conditions or unexpected events.

AKASO Trace 1 Dash Camera D1PRO Pros and Cons

Pro: Dual-camera coverage. The system records the road and cabin simultaneously, making it more versatile than a basic forward-facing dash cam.
Pro: Flexible video resolution. Front-only recording can use up to 2K resolution, while dual recording supports simultaneous 1080p capture.
Pro: Wide field of view. The front and interior lenses together provide broad coverage for traffic, passengers, and incidents near the vehicle.
Pro: Low-light cabin recording. Infrared assistance and Sony STARVIS sensor technology help the interior camera record in dark conditions.
Pro: Connected operation. Wi-Fi makes it easier to review or transfer clips without removing the memory card.
Pro: Safety-focused recording. Loop recording, impact detection, and parking monitoring provide functions commonly expected from a modern car DVR.
Con: Separate GPS hardware. GPS information depends on the external GPS module being installed correctly.
Con: Cabin footage may appear monochrome. Infrared interior recording prioritizes visibility over natural color in dark environments.
Con: More setup than a single-lens camera. Correct positioning of both lenses, the GPS module, and the memory card takes additional time.

The AKASO Trace 1 Dash Camera D1PRO is best for users who need front-and-interior recording. Drivers seeking a simple, compact forward-only camera may prefer a less complex model.

AKASO Trace 1 D1PRO Specifications

Camera configuration: Front-facing camera plus interior cabin camera.
Front recording: Up to 2K at 30 frames per second in front-camera mode.
Dual recording: Front and interior video at 1080p and 30 frames per second.
Front-only recording option: 1080p at up to 60 frames per second for smoother motion capture.
Field of view: Approximately 170 degrees for each lens, providing up to 340 degrees of combined coverage.
Display: 2-inch IPS LCD screen.
Image sensors: Sony STARVIS sensors designed for enhanced low-light sensitivity.
Night vision: Interior infrared assistance with built-in infrared illumination.
Image processing: Wide Dynamic Range support for balancing bright and dark areas.
Connectivity: Built-in Wi-Fi for smartphone access and file management.
GPS: External GPS module for route, speed, and location data when connected.
Storage: Compatible with microSD cards from 8GB to 128GB; use a suitable high-endurance card intended for continuous recording.
Recording functions: Loop recording, automatic start and stop, microphone control, and impact-triggered file protection.
Parking monitoring: Impact-activated recording when the feature is configured and the camera has an appropriate power source.
Operating temperature: Approximately 14°F to 140°F.
Battery: Built-in 300mAh battery intended for short-duration backup and settings support rather than extended vehicle recording.

Detailed Description and Daily Use

The AKASO Trace 1 Dash Camera D1PRO uses two lenses mounted in a single vehicle recording system. The forward lens faces the road, while the interior lens points toward the passenger compartment. Both views are saved to the microSD card when dual recording is enabled. Files are divided into loop-recording segments, allowing the camera to continue operating without requiring manual deletion after the card reaches capacity.

Mount the camera where it has a clear view through the windshield without obstructing the driver’s visibility. Adjust the cabin lens toward the seating area, connect the power cable, and install the external GPS module where it has a clear signal path. Insert the memory card before recording and format it through the camera when prompted or after important files have been copied elsewhere.

Use the LCD screen for basic setup and status checks. Wi-Fi is more convenient for reviewing clips on a phone, but disable Wi-Fi when it is not needed to reduce power use. Keep the microphone enabled when audio may help explain an event, or disable it when cabin audio is not required.

Clean the lenses with a soft, lint-free microfiber cloth. Do not use abrasive materials, spray liquid directly onto the camera, or leave loose cables near pedals or airbags. Check the mount, power connection, GPS module, and memory card regularly. Save important recordings promptly because loop recording can eventually overwrite files that have not been protected.

How to Install and Use the AKASO Trace 1 Dash Camera D1PRO

Installation Steps

Choose a windshield position with a clear forward view and minimal glare.
Clean and dry the mounting area before attaching the camera.
Adjust the front lens so the horizon is near the middle of the image.
Point the interior lens toward the cabin while keeping it clear of mirrors and trim.
Insert a compatible microSD card before beginning continuous recording.
Connect the vehicle power cable and attach the external GPS module if location data is required.
Start the vehicle and confirm that the camera powers on and begins recording.

Recommended Setup

Enable loop recording for everyday use.
Enable the G-sensor so impact-related clips can be protected automatically.
Set the correct date and time before recording evidence.
Format the memory card in the camera after backing up important files.
Use front-only 2K recording when maximum forward detail is more important than cabin coverage.
Use dual 1080p recording when monitoring passengers or recording both views is the priority.

PDF

Faqs

How do I set up the akaso Trace 1 Dash Camera D1PRO for the first time?

Mount the akaso Trace 1 Dash Camera D1PRO where it has a clear view of the road without obstructing your vision. Insert a compatible microSD card, connect the included car charger to the camera, and plug the charger into the vehicle’s 12–24V socket. Turn on the camera, set the date and time, choose the preferred recording resolution, and format the card through the camera menu before driving.

What microSD card does the akaso Trace 1 Dash Camera D1PRO require?

Use a reliable, high-endurance microSD card within the capacity range supported by your exact akaso Trace 1 Dash Camera D1PRO package or manual. Dash cameras continuously overwrite files, so ordinary low-speed cards may cause recording failures, corrupted videos, or card errors. Format the card in the camera before first use and periodically afterward. Always stop recording before removing the microSD card to reduce the risk of damaged files.

Why is the akaso Trace 1 Dash Camera D1PRO not recording video?

First check whether the camera receives power and displays a recording indicator. If recording does not start, confirm that the microSD card is inserted correctly, is not full, and is supported by the camera. Back up important footage, then format the card through the camera menu. Check that loop recording is enabled and inspect the power cable and vehicle socket. If the camera still fails, reset it and test with another suitable card.

How can I improve night recording quality on the akaso Trace 1 Dash Camera D1PRO?

Clean the front and interior camera lenses with a soft, lint-free cloth before nighttime driving. Position the camera behind the rear-view mirror and avoid placing it where dashboard reflections appear on the windshield. Keep wide dynamic range enabled when available, since it helps balance bright headlights and dark areas. Make sure the windshield is clean inside and outside, and avoid covering the infrared lights or camera openings.

How do I use Wi-Fi on the akaso Trace 1 Dash Camera D1PRO?

Enable Wi-Fi on the akaso Trace 1 Dash Camera D1PRO, then open the compatible AKASO dash-camera application on your smartphone and connect to the camera’s displayed Wi-Fi network. Mobile data may need to be disabled temporarily because the phone is connected directly to the camera rather than the internet. Use the app to preview, download, or manage recordings. Disconnect Wi-Fi before driving if it distracts you or affects phone connectivity.

Can the akaso Trace 1 Dash Camera D1PRO record the front and inside of the vehicle at the same time?

The Trace 1 Pro camera system is designed for front and interior recording, with display options that can show the front view, rear or interior view, or both views together. Select the desired dual-camera display mode from the settings menu. Check that the interior camera is aimed toward the cabin and that its lens and infrared lights are unobstructed. Review a short test clip to confirm both views are being saved.

Why does the akaso Trace 1 Dash Camera D1PRO keep restarting or losing power?

Repeated restarting commonly indicates an unstable power connection, a damaged cable, an unsuitable memory card, or insufficient power from the vehicle socket. Reseat both ends of the USB cable and test another compatible 12–24V socket if available. Remove and reinsert the microSD card, then format it in the camera. If the problem occurs only when the engine starts, test the camera with a steady external power source while parked.

How should I maintain and store the akaso Trace 1 Dash Camera D1PRO?

Keep the camera, mount, lens, vents, and charging connections free from dust and moisture. Clean the lenses gently without using abrasive cleaners, and avoid leaving the device exposed to extreme heat or freezing conditions for long periods. Periodically review and back up important recordings, then format the microSD card in the camera. Remove the camera or store it out of direct sunlight when the vehicle will be parked for extended periods.