Allin exporters Drop Shape J66 Ultrasonic Cool Mist Humidifier

With its distinctive drop-shaped form, this chic and effective humidifier creates a calming, cool mist that enhances comfort and air quality in your house. Living rooms, offices, and bedrooms can all benefit from its silent operation thanks to its ultrasonic technology. With huge water tank for extended operation and changeable mist settings, the J66 model is easy to operate. The J66 Humidifier from Allin Exporters will improve the interior air quality.

LIST OF MAIN PARTS 

Humidifier Base 

1. Nebulizer 
2. Fan Outlet
3. Control Dial

4. Water Level Sensor

   

   Bottom of Water Tank 

5. Mist Outlet Channel

6. Water Tank Cap

   

   Mist Lid 

7. Mist Output Slot

   

   Water Tank 

8. Take Upper Tank Out to Fill Water. Unscrew the Base Cap.

   

   Water Filling 

9. Use only RO or demineralized water for healthier air.

   

Technical Specifications

WATER SHORTAGE AUTOMATIC PROTECTION (RED LIGHT ON). 

Description

An excellent device that works well in any home or workplace is the allin exporters Drop Shape Ultrasonic Cool Mist Humidifier. Its cutting-edge ultrasonic technology creates a cool, fine mist that rapidly and readily absorbs into the air, relieving dryness and fostering a healthy atmosphere. With its straightforward touch control panel, which lets you choose your preferred mist level and set a timer, the humidifier is simple to operate. While the appliance's automatic shut-off mechanism provides safety when the tank is empty, the LED night light gives it a stylish touch.

ASSEMBLY & USE 

ALWAYS use fresh cool water when operating the humidifier. 

1. Turn water tank upside down and unscrew the cap of water tank to fill cool water. 
   NEVER fill water up to brim. 
   NEVER use hot water. 
   NEVER add any essential oils, medication, or aromatic product. NEVER pour water through mist outlet. 
2. Precisely screw the cap back over the water tank and upright the water tank over the Humidifier Base. Make sure to fit both parts securely.
3. Plug the power cord of humidifier into the wall socket and turn on the unit by rotating Control Dial.
4. Check power indicator light in green that indicates enough water level and mist will automatically emit from the mist outlet.
5. Rotate the Control Dial to adjust the output of mist intensity.
6. If the LED Indicator of the humidifier turns to red, it indicates that the water tank is empty or at a low level. It is a safety feature to prevent burnout of the ultrasonic plate and damaging to the Nebulizer unit. Turn off the humidifier and refill the water tank for efficient operation.

Allin exporters Drop Shape J66 MAINTENANCE 

ROUTINE CLEANING OF THI S HUMIDIFIER IS ES SEN TIAL TO EN SU RE THE BES T HUMIDIFICATION PERFORMANCE. 
NOTE: Do not leave water in the tank for a prolonged period as it may result in mineral deposits and bacteria buildup that may decrease the output efficiency as well as void the warranty. Bacterial growth is possible if water remains in the tank for more than a day or two. Please keep the unit dry if you do not intend to use it for a longer period. 
DAILY MAINTENANCE 

1. Turn off the humidifier and unplug the power cord from the wall outlet. 
2. Empty water tank & base daily and let the tank & base to air dry.
3. Put the cap off and let the humidifier dry before next use.

WEEKLY MAINTENANCE 

1. Turn off the humidifier and unplug the power cord from wall outlet.
2. Add water to tank up to half and 3-4 teaspoons of vinegar and shake the unit vigorously and let the unit rest for 30 minutes.
3. Empty the tank fully and rinse the humidifier with plain water.
4. Fill the base with lukewarm water and add 2 teaspoon of white vinegar let the unit rest for 30 minutes. Empty the base fully and rinse the humidifier with plain water. Ensure to pour water away from the fan located at the bottom.
   TIP: Clean the nebulizer unit with a damp cotton swab or cloth after soaking in water.
5. Allow tank & base to air dry and leave cap off the tank until the next use.
6. NEVER IMMERSE HUMIDIFIER BASE IN WATER.

IMPORTANT SAFETY INSTRUCTIONS 

WARNING: Read these instructions before using the humidifier

• Do not use any kind of essential oil, aromatic product or anything other than water inside the water tank or over the surface to prevent malfunctioning of unit.
• Always ensure to lift water tank with both the hands.
• This humidifier is intended for indoor use only. Do not use this humidifier in open areas.
• Always ensure to fill water in humidifier before connecting to mains.
• Use only cool tap water to ensure clear mist generation. We recommend to use filtered or distilled water if tap water is of substandard quality. Do not use hard water.
• Never operate the unit with wet hands or damaged cord and plug to avoid electric shocks while plugging and unplugging the device.
• Never operate the unit with wet hands or damaged cord and plug to avoid electric shocks while plugging and unplugging the device.
• Ensure to tighten the water tank cap on its base and aim the humidifier outlet away from children, walls, furniture and electrical appliances.
• Place the humidifier on a smooth and flat surface with cord away from heated surfaces and areas. It is recommended to unplug the humidifier when not in use or during cleaning procedures.
• Leave the room partly open when using this device in an enclosed area to avoid condensation on walls or furniture due to increased humidity in the interiors.
• Take necessary precautions while cleaning the interior of this humidifier in such away that water should not come in contact with fan vent or electrical controls to prevent device damage. Please refer to the MAINTENANCE in this manual for proper cleaning operations.
• Do not lift or tilt the top of humidifier or try to fill or empty its tank during operation.
• Do not try to use detergent or soap to clean the parts that come in contact with water as detergent film can interfere with the electrical components of this humidifier.

Troubleshooting

If you are having trouble with your Drop Shape Ultrasonic Cool Mist Humidifier, here are some common problems and solutions:

• The humidifier is not producing mist: Check to make sure that the water tank is filled and that the appliance is plugged in and turned on.
• The humidifier is making noise: Make sure that the water tank is properly seated and that there is no debris or mineral build-up in the appliance.
• The LED night light is not working: Check to make sure that the appliance is turned on and that the night light setting is selected.

Pros & Cons

• Pros:
  • Advanced ultrasonic technology for fine, cool mist
  • Long runtime and automatic shut-off for safety
  • LED night light and touch control panel for style and convenience
• Cons:
  • May require regular cleaning to prevent mineral build-up
  • May not be suitable for use in very large rooms or spaces

HUMIDIFIER WARRANTY 

The warranty on Allin Exporters Lotus Shape Humidifier is limited to only manufacturing defects. Warranty will be void in case of misuse, accidental damage, product abuse, defect due to negligence, improper repair or alteration with standard design or part by unauthorized persons, or defect arising from failure to follow operating instructions provided in this manual including using essential oils or any other aromatic product directly into the tank and base. 

Kindly register your purchase within 15 days to activate the warranty.