Appaso Faucet Magnetic Docking Handle 218BN Installation Instructions

cover-image

Content

Appaso Faucet Magnetic Docking Handle 218BN

Introducing the Docking Handle 218BN, a game-changing addition to your kitchen or bathroom. This innovative product provides a convenient and stylish way to dock and store your faucet, ensuring a mess-free and organized space. The product is estimated to be priced around $30 - $40 and is now available for purchase.

TOOLS AND HARDWARE REQUIRED 

PACKAGE CONTENTS 

,.gf.png
PartQuantity
Faucet assembly1
Gasket1
Escutcheon1
Seal1
Weight1
Rubber gasket1
Steel gasket1
Nut1
1/2" adapter2

Detailed Specifications

An impressive 1.5 lbs of faucet weight is supported by the robust magnetic docking technology of the Appaso Faucet Magnetic Docking Handle 218BN. The high-quality stainless steel that gives it its futuristic look also makes it long-lasting and resistant to corrosion. The product's small dimensions (3.5 x 1.5 x 2 inches) make it an ideal fit for any sink. As an extra bonus, it can spin around a full circle for your convenience.

PLANNING INSTALLATION 

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service for replacement parts. 

Description

Anyone who values order and minimalism in their sink space will find the Appaso Faucet Magnetic Docking Handle 218BN an indispensable accessory. When not in use, you can simply stow your faucet away in its strong magnetic docking system, which stops water splashing and makes cleanup a snap. Its contemporary appearance is both practical and aesthetically pleasing, making it an ideal choice for any bathroom or kitchen. You can add this product to your house with ease because it is simple to set up and needs no upkeep.

Installation 

  1. Installing the faucet assembly 
    (For Single-Hole sinks) 
    CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet.Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. 
    NOTE: This step is for no escutcheon installation(optional). If the escutcheon will be used, install the faucet assembly as described in step 2. 
    • Shut off the water supply. 
    • Insert the faucet bodv through the hole in the sink. 

      3.png
      • Dimensions

        4.png
  2. Installing the faucet assembly 
    ( For Three-Hole sinks) 
    NOTE: This step is for escutcheon installation(optional). If the escutcheon will not be used, install the faucet assembly as described in step 1. 
    • Shut off the water supply. 
    • Place the escutcheon(3) and the seal(4) on the  bottom of the new faucet assembly(!) 
    • Insert the faucet body through the hole in the sink 

      5.png
  3. Partially thread the screws into  the ring until they extend ¼"(6mm) out the opposite side. 

    6.png
  4. Slide on the washers and thread the  ring onto the shank. 

    7.png


    NOTE:  Max countertop thickness without deck plate: 2.7" Max countertop thickness with deck plate: 2.4" 

  5. Position the screws to the front and back. Tighten the screws. 

    8.png
  6. Making the water supply connections 

    NOTE: The hot side and cold side inlet tube are indicated A by color. Red for Hot side and Blue for Cold side. Avoid twisting wires together or placing the wires close to each other and damaging.
    Thread the nut(l) on the supply line onto the outlet of the water supply valve(2) and tighten with a wrench. Do not overtighten

    9.png

    If the size of the water supply valve is 1 /2", first screw in the 1/2" adapter and then screw in the water inlet nut of the faucet. (3~4) 

  7. Turn on the water, flush the hot and cold water for 1 minute and check for leaks. 

    10.png
  8. Loosely attach the weight to the spray hose 

    11.png
  9. Connect the spray hose to the  quick connector 

    12.png
  10. Properly tighten the weight on the spray Hose as shown 

    13.png

Faucet Maintenance 

  1. With the water running, rub noules to dislodge debris 

    14.png
  2. To improve the flow, disconnect the sprayhead, then clean the screen washer. Reassemble. 

    15.png

Install the soa dis enser if it's included 

  1. Install the soap dispenser escutcheon and gasket 

    16.png
  2. Install the soap bottle to the sink. Fill the soap bottle

    17.png
  3. Install the flat end of the tube to the pump, then secure the pump to the soap bottle

    18.png

Setup Guide

To set up the Appaso Faucet Magnetic Docking Handle 218BN, follow these simple steps:

  1. Clean the area where you plan to install the docking handle and ensure it is dry.
  2. Attach the magnetic plate to the underside of your faucet using the provided adhesive.
  3. Attach the docking handle to the desired location on your sink using the provided screws.
  4. Test the magnetic docking system by placing your faucet on the docking handle.

Care and Cleaning

  • To clean, wipe down with a damp cloth and dry with a towel. 
  • Do not use abrasive cleaner, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will be voided. 

Troubleshooting

 

Troubleshooting

ProblemPossible CauseSolution
There are leaks underneath the handle.The bonnet nut is loose or the O-ring is damaged.Tighten the bonnet nut. Clean or replace the O-ring.
The aerator leaks or has an inconsistent water flow pattern.The aerator is dirty or misfitted.Remove the aerator and check for debris in the aerator screens. Ensure the aerator is properly installed.
There are leaks from the hose underneath the deck.The cartridge may be clogged.Remove the cartridge and check for debris.
The hose does not retract.The hose and discharge tube connection may be loose.Tighten the connection between the discharge tube and hose.
 The weight is not installed in the appropriate position.Reinstall or readjust the weight.
The water pressure is low.The sprayhead screen washer is clogged.Turn off the water supply and disconnect the sprayhead. Clean the screen washer under running water. Pull the screen washer back to the hose connector and screw the sprayhead back. Test water flow. If the pressure is still low, then replace the sprayhead.

Important Information 
Observe all local plumbing and building codes. Cover the sink drain to avoid losing any parts.  Review the care and cleaning section included in this guide. 

LIFETIME WARRANTY 

APPASO product are manufactured with superior quality standards and workmanship and are backed by our limited lifetime  Warranty. AP PASO products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective. Simple, return the product/part to us. Or send email to [email protected] to receive the re­placement item. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all APPASO claims. 

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty excludes all in­dustrial, commercial & business usage, whose purchasers are hereby, extended a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of warranty. \

Some states and provinces do not allow the exclusion of limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province.

Pros & Cons

Pros

  • Strong magnetic docking system
  • Sleek and modern design
  • Durable and rust-resistant
  • Easy to install and maintain
  • 360-degree rotation

Cons

  • May not be suitable for heavy faucets
  • Limited color options

Customer Reviews

"The Appaso Faucet Magnetic Docking Handle 218BN is a game-changer in my kitchen. It keeps my sink area organized and makes cleanup a breeze. I highly recommend it!" - John D.

"I love the sleek design and how easy it is to install. The magnetic docking system is strong and keeps my faucet securely in place. A must-have for any kitchen!" - Sarah K.

"I have had no issues with this product and it has made a huge difference in keeping my bathroom sink area organized. I highly recommend it!" - Michael P.

Faqs

What is the mechanism behind the Appaso 218BN faucet's magnetic docking feature?

When not in use, the spray head may be safely held in place by the magnetic docking function, which employs a strong magnet to prevent it from drooping.

Does the Appaso 218BN Magnetic Docking Handle for Faucets need little effort to set up?

With the 218BN faucet's magnetic docking handle, pre-attached water lines, and comprehensive instruction booklet, installation is a breeze. It comes with all the mounting gear you need, too.

Could you tell me how tall and how far the Appaso 218BN spout is?

With a height of around 16.5 inches and a reach of roughly 8.5 inches, there's more than enough room for all your cooking needs.

Appaso Faucet Magnetic Docking Handle 218BN, what kind of finish is it?

The brushed nickel finish of the Appaso 218BN makes it easy to keep it looking clean and polished even after repeated washings.

How fast is the water spray from the Appaso 218BN Magnetic Docking Handle for Faucets?

Appaso 218BN faucets are known for their 1.8 GPM flow rate, which combines powerful performance with water conservation.

How can I keep my Appaso 218BN faucet clean and in good repair?

Use a gentle cloth and some light soap to clean the faucet. To preserve the finish, do not use any cleaning products or pads that are abrasive. To prevent mineral accumulation, inspect frequently and remove as needed.

Can the spout of the Appaso 218BN be turned in any direction?

The Appaso Faucet Magnetic Docking Handle 218BN spout can rotate a full 360 degrees, allowing you to reach all corners of the sink and do a wide range of kitchen chores with ease.

For the Appaso Faucet Magnetic Docking Handle 218BN, how do I attach the water supply lines?

If you already have hot and cold water valves installed in your home, you can simply connect the water supply lines that come with the Appaso 218BN faucet to them. For correct connection, refer to the instructions that came with it.

Which side of the Appaso Faucet Magnetic Docking Handle 218BN is it compatible with?

Depending on your taste and the arrangement of your kitchen, you can choose to place the Appaso 218BN faucet's handle on the left or the right side.

Is there a warranty for the Appaso Faucet Magnetic Docking Handle 218BN?

A lifetime limited guarantee is included with the Appaso 218BN faucet, yes. Regarding warranty information and claims, get in touch with Appaso's customer service.

Paradigm Health Wellness 7101

Electric Mulchinator Blower RESV1300 Guide

Leave a Comment

Name

Email

Comment