Binary 360 Series HDR Extender with IR B-360-1CAT-30 User Manual

Content

Binary Binary 360 Series HDR Extender with IR B-360-1CAT-30 Manual

Introduction

The binary Binary 360 Series HDR Extender with IR B-360-1CAT-30 sends high-quality HDMI video, multichannel audio, and infrared control signals over one category cable. It is designed for installations where an HDMI source, such as a media player, game console, satellite receiver, or home theater component, must connect to a television or projector located farther away than a standard HDMI cable allows.

This compact 4K HDR extender supports video resolutions up to 4K at 60 Hz with 4:4:4 chroma and 8-bit color. It can transmit 4K video up to 30 meters using Cat 6, Cat 6A, or Cat 7 cable, while Full HD 1080p signals can travel up to 50 meters when suitable category cable is used. The system also supports HDMI 2.0b features, HDCP 2.2, 3D video, and audio formats specified by HDMI 2.0.

Power over Cable allows power to be shared between the transmitter and receiver, helping reduce cable clutter during installation. Automatic HDMI equalization helps compensate for signal loss across the cable run, while one-way IR pass-through lets a remote control operate the source from the display location.

This Binary HDMI extender suits residential theaters, conference rooms, classrooms, digital signage systems, retail displays, and distributed video installations. It is especially useful for installers who need a compact, reliable 4K solution without adding a network switch or second HDMI source.

Specifications of the Binary Binary 360 Series HDR Extender with IR B-360-1CAT-30

Product type: 4K HDR HDMI extender with infrared pass-through
Model: B-360-1CAT-30
HDMI standard: HDMI 2.0b
Content protection: HDCP 2.2 compatible
Maximum data rate: 18 Gbps
Maximum 4K performance: 4K at 60 Hz, 4:4:4, 8-bit color
HDR support: HDR formats supported by the extender and connected equipment
Supported video formats: 4K, 1080p, 1080i, and 720p
4K transmission distance: Up to 30 m/98 ft over Cat 6, Cat 6A, or Cat 7 cable
1080p transmission distance: Up to 50 m/164 ft over suitable Cat 5e, Cat 6, Cat 6A, or Cat 7 cable
Audio: HDMI audio, including PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X where supported by the source and display
IR control: One-way IR pass-through from the receiver to the transmitter
Power: 12 V DC, 2 A power supply; PoC operation supported
Operating temperature: 0°C to 40°C
Installation feature: Automatic HDMI equalization

How to Set Up the B-360-1CAT-30 4K HDMI Extender

Turn off the HDMI source and display before making connections.
Connect the HDMI output of the source device to the HDMI input on the transmitter.
Connect the transmitter and receiver using one continuous category cable. Use Cat 6 or better for 4K at 60 Hz. Avoid couplers, wall plates, and network switches in the extender link.
Connect the receiver HDMI output to the television, projector, or AV receiver.
For remote control, connect the IR receiver accessory to the receiver and the IR emitter accessory to the transmitter. Position the emitter over the source device’s IR sensor.
Connect the supplied power adapter as instructed by the installation documentation. PoC can reduce the need for a second power connection, but both units must receive adequate power.
Power on the source and display, then select the correct HDMI input on the display.

Keep category cable away from high-voltage wiring and do not exceed the recommended distance. Do not connect or disconnect cables while equipment is powered if doing so could create a short circuit or damage connected devices. If the display remains blank, test with a shorter HDMI cable, verify the source output resolution, and temporarily disconnect the IR accessories to isolate the problem.

Troubleshooting the Binary B-360-1CAT-30

No picture or “No Signal” message

Confirm that the source, transmitter, receiver, and display are powered. Check both HDMI connections and verify that the category cable is fully seated. Use a certified Cat 6 cable for 4K operation and confirm that the total distance is within the recommended limit.

Picture drops out or flashes

Reduce the source output to 1080p as a diagnostic test. If the image stabilizes, inspect the category cable, remove intermediate connectors, and confirm that the source and display support the selected HDR, refresh rate, and color format.

Audio is missing

Check the display or AV receiver audio input and confirm that the source is not set to an unsupported audio mode. Test with PCM stereo before selecting Dolby or DTS formats.

IR control does not work

Make sure the IR receiver is connected at the display end and the emitter is positioned directly over the source device’s IR sensor. IR operation is one-way, so reverse-direction control should not be expected.

Power or link indicators are inactive

Check the power adapter, outlet, cable continuity, and PoC arrangement. Disconnect power before replacing damaged cables. The product documentation and authorized Binary support channel should be used for model-specific service, warranty, or replacement assistance.

Pros and Cons

Advantages

Longer HDMI reach: Extends 4K video up to 30 meters and 1080p video up to 50 meters over category cable.
High-bandwidth performance: Supports 18 Gbps HDMI 2.0b operation, 4K at 60 Hz, HDR, HDCP 2.2, and 3D.
Simple cabling: One category cable carries the extended video and audio signal.
PoC support: Power over Cable can simplify installations where access to an additional outlet is limited.
Remote control integration: One-way IR pass-through allows source control from the remote display.
Compact design: The small transmitter and receiver housings fit neatly behind displays and equipment racks.

Limitations

Distance depends on resolution: Maximum 4K distance is shorter than the supported 1080p distance.
One-way IR only: The system is not intended for bidirectional infrared control.
No Dolby Vision: Dolby Vision should not be selected as a required feature for this model.
Point-to-point design: It does not replace a matrix switch, IP video distribution system, or multi-display controller.
Cable quality matters: Poorly terminated, damaged, or excessively long category cable can cause handshake problems and intermittent video.

The B-360-1CAT-30 is best for straightforward point-to-point 4K HDMI extension with basic IR control. Installations requiring bidirectional control, Dolby Vision, audio return, switching between multiple sources, or significantly greater distances may require a different extender category or distribution platform.

PDF

Faqs

How do I set up the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30 for the first time?

Connect the HDMI source to the transmitter’s HDMI input and connect the display to the receiver’s HDMI output. Run one straight-through Cat 5e, Cat 6, Cat 6a, or Cat 7 cable from the transmitter UTP output to the receiver UTP input, preferably using T568B wiring. Apply power using the supplied adapter at either compatible unit location, then select the correct HDMI input on the display. Confirm that both units show normal power or link activity before testing video.

What Cat cable and maximum distance should I use with the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30?

Use a high-quality, solid-core Cat 6, Cat 6a, or Cat 7 cable for the most reliable 4K HDR performance. The extender can transmit 4K at 60 Hz for distances up to approximately 30 meters, or 98 feet, under suitable installation conditions. For 1080p at 60 Hz, the supported distance can extend to approximately 50 meters, or 164 feet. Avoid couplers, patch panels, damaged cable, and parallel runs beside power wiring.

Why is the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30 showing no picture?

First, verify that the source is powered on and connected to the transmitter HDMI input, while the display is connected to the receiver HDMI output. Reseat both HDMI cables and confirm the display is set to the correct input. Check that the Cat cable is connected to the extender’s UTP ports rather than a network switch. If the problem continues, test with a shorter Cat cable, reduce the source resolution temporarily, and reconnect power to both units.

Can the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30 transmit 4K HDR video and multichannel audio?

Yes, the extender is designed for HDMI 2.0b video transmission, including 4K at 60 Hz, HDR, and data rates up to 18 Gbps. It also supports common HDMI audio formats, including multichannel PCM and several high-definition formats. The actual result depends on the source, display, HDMI cables, content, and selected video settings. If audio fails, set the source to a compatible output format and test with audio enabled directly at the display.

How does IR control work on the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30?

The B-360-1CAT-30 provides one-way IR pass-through so a compatible remote can control equipment located at the opposite end of the HDMI connection. Install the IR emitter and receiver in the correct transmitter or receiver locations, aim the receiver toward the remote, and position the emitter over the source device’s IR sensor. Keep the IR components away from bright sunlight and fluorescent lighting. Test remote commands at close range before final mounting.

Can I connect the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30 to a network switch?

No. The Cat cable connection between the B-360-1CAT-30 transmitter and receiver carries the HDMI extension signal and should be treated as a dedicated point-to-point link. Do not connect it through a standard Ethernet switch, router, or structured network patch path unless the manufacturer specifically approves that topology. Use a direct compatible Cat cable between the UTP ports, and label both ends clearly to prevent accidental connection to normal network equipment.

What should I do if 4K video flickers or drops out on the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30?

Flickering or intermittent video usually indicates a marginal cable, excessive distance, poor termination, or an HDMI compatibility issue. Confirm that the Cat cable is within the recommended 4K distance and has no couplers or damaged connectors. Replace long or unshielded patch leads with quality solid-core cable, then reseat the HDMI connections. Temporarily disable HDR or lower the resolution to identify the limit. Automatic HDMI equalization helps compensate for signal loss but cannot correct defective wiring.

How should I clean and maintain the binary Binary 360 Series HDR Extender with IR B-360-1CAT-30?

Disconnect power before cleaning or inspecting the extender. Wipe the transmitter and receiver with a dry, soft, lint-free cloth; do not spray liquid into the enclosure or connectors. Keep ventilation areas clear and avoid installing the units near moisture, excessive heat, or heavy dust. Check HDMI, IR, and Cat connections periodically for looseness or strain. Do not bend cables sharply, pull on connectors, or open the housings, since internal servicing should be handled by qualified personnel.

More binary manuals

Installation: Binary B-260-ARC Audio Return Extender for HDMI ARC and SPDIF IN Instruction Guide