Installation: Cadet Apex72 Decorative Cover Instruction Manual

Content

Overview

The Apex72 Decorative Cover is a front cover kit designed for Cadet Apex72 wall heater assemblies. It helps complete the heater’s appearance while working with the outlet grill to protect the front of the unit and deliver a clean, finished look.

This guide is for homeowners, installers, and maintenance users who need a clear explanation of the Apex72 Decorative Cover, including what comes in the box, how it installs, and the key safety and warranty details.

Specifications

Product type: Decorative cover kit for Apex72 heater assemblies
Compatible heater model: HW
Electrical rating shown in the manual: 208 Volts, 60Hz, 1000 Watts, 447
Included fasteners: 1 black 3/8 inch #6 outlet grill screw and 2 1/2 inch #8 retention screws
Included cover retention method: Permanent neodymium magnets, with optional retention screws
Outlet grill styles supported: Hexagonal or louvered outlet grill
Required tool: Phillips screwdriver
Cover size listed in product sheet: 12 inches W x 8-1/2 inches H x 1 inch D
Rough-in size listed in product sheet: 10 inches W x 7-7/8 inches H x 4 inches D

Detailed Description

The Apex72 Decorative Cover is a non-metallic front cover that installs over the heater assembly after the outlet grill is in place. It uses strong magnets to hold the cover securely against the heater, and it can be locked down further with the supplied retention screws if desired.

The installation depends on a few named parts. The outlet grill attaches first to the heater assembly, then the decorative cover is positioned over it. The kit includes the decorative cover itself, the grill screw, and retention screws. The outlet grill may be louvered or hexagonal, depending on the matching Apex72 version.

In normal use, the decorative cover is part of the finished heater face and should not block airflow. The heater and cover are intended to be used together with the correct Cadet wall can and the matching Apex72 components.

Safety

Power must be switched off at the main disconnect panel before removing or installing the outlet grill or decorative cover. The disconnect panel should also be locked or tagged so no one restores power while work is in progress.

The manual warns that abnormal operating conditions can create very high temperatures. The front of the heater must never be partially or fully blocked. The decorative cover is intended for use only with the correct Cadet wall can model CC.

The Apex72 Decorative Cover includes four neodymium magnets. These magnets create a very strong magnetic field, so any detached magnet should be handled carefully to avoid injury.

Setup and Operation

Installing the outlet grill

Start by fitting the metal outlet grill onto the heater assembly. Slide the two left-side tabs of the grill into the matching slots on the heater assembly, then snap the top and bottom tabs into place. Secure the grill with the provided 3/8 inch black screw.

Installing the decorative cover

After the grill is secured, place the decorative cover on the heater. The magnets hold it in position automatically. If extra security is preferred, install the two 1/2 inch retention screws at the top and bottom of the cover after the grill has already been fastened.

Once the cover is installed, restore power at the main disconnect panel. For operating details, heater-specific maintenance, and any model-specific instructions, the matching heater owner’s guide should be followed.

Cleaning and Maintenance

The kit itself does not include a separate cleaning routine, but the heater manual stresses regular maintenance for safe operation and longer service life. Keeping the heater and decorative cover properly maintained helps prevent performance problems and can protect warranty coverage.

Warranty

The Apex72 Decorative Cover is covered by a limited five-year warranty for the original consumer only and the warranty is not transferable. Cadet will repair or replace a defective Apex72 decorative cover found to be defective within five years of purchase.

The warranty does not apply to damage caused by improper installation, incorrect supply voltage, poor maintenance, misuse, abuse, accidents, alterations, unauthorized service, shipping damage outside Cadet’s responsibility, or unauthorized accessories and components. Repair or replacement does not create a new warranty or extend the original coverage.

Pros and Cons

Pros: Magnetic installation makes the Apex72 Decorative Cover quick to fit and remove when needed.
Pros: Optional retention screws add extra security for a firmer install.
Pros: Works with both louvered and hexagonal outlet grill versions.
Pros: Includes the key hardware needed for installation.
Cons: Installation must be done with power off, so it is not a casual snap-on accessory.
Cons: The cover must be used with the correct Cadet wall can and matching heater components.
Cons: Strong magnets require care if any parts become detached.

PDF

Faqs

How do I install the Apex72 Decorative Cover correctly on the heater assembly?

First, turn off power at the main disconnect panel before touching the heater. Install the metal outlet grill onto the heater assembly by sliding the left-side tabs into the matching slots, then fitting the top and bottom tabs into place. Secure it with the included black outlet grill screw. After that, place the decorative cover so the magnets hold it in position. If extra security is needed, use the two retention screws only after the outlet grill is fully installed.

Does the Apex72 Decorative Cover need tools or extra parts for installation?

The decorative cover is designed for a straightforward install and only requires a Phillips screwdriver. The box includes the cover, one black outlet grill screw, two retention screws, and the matching outlet grill style. No special tools are listed beyond the screwdriver. For best results, make sure you are working with the correct heater assembly and that the outlet grill is installed before securing the cover. Using the included hardware helps keep the fit safe and stable.

Is the Apex72 Decorative Cover held on by magnets or screws?

The decorative cover is primarily held in place with strong permanent magnets, which makes it easy to attach and remove when needed. Cadet also includes optional retention screws for users who want added security. Those screws should be used only after the outlet grill has already been installed and fastened correctly. The magnet-based design keeps the cover snug while still allowing practical access for maintenance or cleaning when the heater is powered off.

What safety steps should I follow before removing or installing the decorative cover?

Always shut off electrical power at the main disconnect panel before removing or installing the outlet grill or decorative cover. The instructions also recommend locking or tagging the panel door so no one turns the power back on while you are working. This is important because the heater can create dangerous electrical shock, burns, or other serious injury if powered during service. Wait until the unit is fully safe before handling the cover, grill, or screws.

Which outlet grill works with the Apex72 Decorative Cover?

The Apex72 Decorative Cover is used with a matching outlet grill, and the instructions mention both hexagonal and louvered grill options. The grill must be installed on the heater assembly before the decorative cover is attached. Make sure the tabs align properly on the left side and the grill is secured with the included black screw. Using the correct grill style helps the cover sit correctly and keeps the heater front assembled the way it was designed.

Why should the front of the Apex72 heater never be blocked by the decorative cover or anything else?

The heater must not be partially or fully covered or obstructed, because abnormal conditions can generate high temperatures. Blocking the front can reduce airflow and create a safety hazard. The decorative cover is designed to work as part of the heater assembly, not as a barrier over the heating opening. Keep the installation as intended, use only approved parts, and make sure nothing sits in front of the heater that could restrict operation or trap heat.

What should I check if the Apex72 Decorative Cover does not sit flush or feels loose?

Start by confirming the outlet grill is fully installed and fastened with the correct screw, since the decorative cover depends on that step. Then check that the cover is aligned with the magnets and seated evenly on the heater assembly. If you are using the retention screws, make sure they were added only after the grill was secured. A loose fit usually points to misalignment, missing hardware, or installing the cover before the grill was properly attached.

Can the Apex72 Decorative Cover be installed on any heater model or in any position?

No. The decorative cover is intended for the Apex72 heater assembly and must be used with the proper Cadet wall can model specified in the instructions. The heater system is designed for horizontal installation only, not vertical or ceiling mounting. It should also be installed according to the clearances and setup requirements in the heater’s owner’s guide. Using the cover with the wrong model or orientation can affect safety, fit, and overall performance.