Usage: Calphalon Quick Brew Coffee Maker HE120CMG HE100CMT Instruction Guide
Content
Overview
The Quick Brew Coffee Maker HE120CMG HE100CMT is a programmable drip coffee maker designed for convenient everyday brewing. Both models use a removable water reservoir, a reusable gold-tone coffee filter or paper filter, automatic pause-and-serve operation, and selectable brewing modes.
The two versions differ in carafe operation. Model HE100CMT uses a thermal carafe and switches off when brewing finishes. Model HE120CMG uses a glass carafe with a two-hour keep-warm period before the coffee maker turns off automatically.
Specifications
- Models: HE120CMG glass carafe and HE100CMT thermal carafe
- Water system: Removable water reservoir with charcoal filter assembly
- Filter options: Gold-tone reusable coffee filter or paper filter
- Brewing modes: Standard brewing, 1-4C for smaller batches, and BOLD for stronger extraction
- Controls: SET, UP and DOWN timer buttons, MODE, START/CANCEL, and AUTO/CANCEL
- Display: Digital clock and status indicators including BREW, READY, and AUTO
- Keep-warm operation: Available on the HE120CMG glass carafe model for up to two hours
Detailed Description
The coffee maker draws water from the reservoir and passes it through the coffee grounds held in the removable filter holder. Brewed coffee flows into the carafe through the auto pause-and-serve flow valve. This valve allows the carafe to be removed briefly during brewing while helping prevent continuous dripping.
The charcoal filter assembly fits over the water valve at the bottom of the removable reservoir. It helps filter the water used for brewing and must be seated correctly before operation.
The MODE button provides two optional settings. Choose 1-4C when making fewer than five cups, or select BOLD when a stronger extraction is preferred. The selected mode can be used for immediate brewing or programmed automatic brewing.
Safety
- Place the coffee maker on a stable, level surface before filling or brewing.
- Use cool, clean water and never fill the reservoir above its MAX line.
- Make sure the carafe is firmly positioned against the auto pause-and-serve flow valve before starting a brew cycle.
- Keep the carafe lid closed when pouring brewed coffee to reduce the risk of burns and spills.
- Allow the appliance to cool before emptying or handling parts after a brewing cycle.
- Do not operate the initial cleaning cycles with coffee grounds or a filter in the holder.
Before First Use
- Set the coffee maker on a level countertop and remove all packing materials.
- Wash the removable water reservoir, carafe, carafe lid, and removable filter holder in warm, soapy water.
- Rinse and dry the washed parts thoroughly.
- Reassemble the clean components and connect the coffee maker to an electrical outlet.
Initial Cleaning
Before brewing coffee, rinse the internal water path by running two full carafes of clean, cool water through the appliance.
- Fill the reservoir with clean, cool water and place the carafe on the base plate.
- Leave the filter holder empty; do not add a filter or coffee grounds.
- Press START/CANCEL to begin the first cycle.
- When the cycle is complete, press START/CANCEL to switch the coffee maker off and wait 10 minutes for it to cool.
- Empty the carafe, return it to the base plate, and refill the reservoir with fresh water.
- Run the second cycle by pressing START/CANCEL.
- Discard the water after the second cycle finishes.
- Open the filter cage on the bottom of the reservoir handle and insert the charcoal filter.
- Place the charcoal filter assembly over the water valve at the base of the reservoir.
Setting the Clock
The current time is only needed when using the automatic future-brew function. The display includes an AM or PM indicator.
- Press SET. The hour and minute values begin flashing.
- Use the UP or DOWN timer buttons to adjust the current time.
- Press SET again to confirm, or allow approximately five seconds for the setting to confirm automatically.
Brewing Coffee
- Lift the water reservoir lid.
- Confirm that the charcoal filter assembly is correctly seated over the water valve.
- Fill the reservoir with cool, clean water up to the desired level, without passing the MAX line.
- Replace the reservoir, fold down its handle, and close the lid.
- Set the carafe on the base plate and check that it is firmly against the auto pause-and-serve flow valve.
- Put the gold-tone reusable filter or a suitable paper filter into the removable filter holder.
- Add the desired amount of coffee grounds and close the filter holder lid.
- For fewer than five cups, press MODE until 1-4C is selected. For a stronger brew, select BOLD.
- Press START/CANCEL. BREW appears on the digital display while the coffee maker operates.
After brewing, the HE100CMT thermal carafe model switches off automatically, and the thermal carafe can be removed from the base plate. On the HE120CMG glass carafe model, READY appears when brewing ends and the two-hour keep-warm period begins. The glass carafe model switches off automatically after that period.
Automatic Future Brewing
The AUTO function lets the coffee maker begin a brew cycle at a programmed time. Set the current clock time first if it is not already correct.
- Press AUTO/CANCEL. The AUTO/CANCEL indicator illuminates.
- When the hour and minute values flash, use the UP or DOWN timer buttons to set the desired future brew time.
- Check the AM or PM indicator carefully.
- Press SET to confirm the time, or wait approximately five seconds for automatic confirmation.
- Press MODE if you want to use 1-4C for a smaller batch or BOLD for stronger extraction.
- Confirm that AUTO appears on the digital display.
Preparing the Programmed Cycle
- Fill and correctly position the removable water reservoir.
- Place the carafe on the base plate and ensure it is firmly against the flow valve.
- Insert the gold-tone filter or a paper filter into the filter holder.
- Add coffee grounds and close the filter holder lid.
- Press AUTO/CANCEL again. AUTO appears on the display to confirm that the program is active.
- At the programmed time, the coffee maker switches on and begins brewing automatically.
The HE100CMT turns off when the brew cycle ends. The HE120CMG displays READY, keeps the coffee warm for two hours, and then switches off.
Canceling Automatic Brewing
Press AUTO/CANCEL to cancel the programmed future brew time.
Cleaning and Maintenance
- Wash the removable water reservoir, carafe, carafe lid, and filter holder in warm, soapy water before first use.
- Rinse cleaned parts thoroughly and dry them before reassembly.
- Keep the charcoal filter assembly seated over the reservoir water valve during normal operation.
- Run water-only cycles when preparing the coffee maker for first use, and discard that water rather than drinking it.
- Allow the appliance to cool before emptying the carafe or handling removable components.
Troubleshooting
The coffee maker does not start at the desired automatic time
Check that the current clock time and programmed time use the correct AM or PM setting. Confirm that AUTO is visible on the display and that AUTO/CANCEL was pressed to activate the program.
The coffee maker will not brew
Make sure the reservoir contains water, is correctly positioned, and is not filled beyond the MAX line. Check that the carafe is seated firmly against the auto pause-and-serve flow valve, then press START/CANCEL.
Coffee spills or continues dripping
Verify that the carafe is centered on the base plate and properly aligned with the flow valve. Check that the filter holder and its lid are correctly installed and that the filter is not overloaded with grounds.
The coffee strength is not suitable
Use the 1-4C setting for batches of fewer than five cups. Select BOLD when a stronger extraction is desired.
Pros and Cons
- Pros: Programmable automatic brewing, removable reservoir, reusable gold-tone filter, charcoal water filter, small-batch mode, bold-brew option, and automatic shutoff.
- Pros: The HE100CMT thermal carafe model switches off after brewing, while the HE120CMG glass carafe model provides a two-hour keep-warm period.
- Cons: Automatic brewing requires the clock to be set correctly, including the AM or PM selection.
- Cons: The reservoir, carafe, filter holder, and charcoal filter assembly must be positioned correctly for the coffee maker to operate as intended.
With the correct water level, filter setup, carafe position, and brew mode, the Quick Brew Coffee Maker HE120CMG HE100CMT provides straightforward manual or scheduled drip brewing for everyday use.
Faqs
How should I prepare the Quick Brew Coffee Maker before making coffee for the first time?
How do I correctly fill and assemble the Quick Brew coffee maker for brewing?
Which brew mode should I use for a small batch or stronger coffee?
Why does the HE120CMG stay on after brewing while the HE100CMT turns off?
How do I set the clock and program automatic brewing?
What should I check if the programmed Auto Brew does not start?
How can I prevent coffee or water from overflowing during brewing?
What safety steps should I follow when pouring coffee from either carafe?
More calphalon manuals
- Setup: Calphalon XL Digital Convection Oven User Manual
- Usage: Calphalon Cool Touch Countertop Oven TSCLTVCT2 User Manual
- Usage: Calphalon SCCLD3 Precision Control Slow Cooker User Manual
- Usage: Calphalon Precision Control Countertop Oven TSCLTRDG3 Instruction Manual
- Usage: Calphalon Even Sear Multi Grill CKCLIG1 Instruction Manual
- Usage: Calphalon Digital Sauté Slow Cooker SCCLD1 Instruction Manual
Leave a Comment
