Installation: Cellara EWD24BES 24-inch Dual Zone Wine Cooler Instruction Manual

Overview

The EWD24BES 24-inch Dual Zone Wine Cooler is an indoor beverage center designed for household and similar residential applications. Its two independently adjustable compartments let you store different wine styles at separate temperatures, while the glass door, adjustable shelving, interior LED lighting, and electronic controls make bottle storage and serving convenient.

This wine cooler can be installed as a freestanding appliance or fully recessed into suitable cabinetry. It is intended for sealed wine bottles and beverages, not frozen food or explosive materials. Follow the installation, grounding, ventilation, and anti-tip requirements before loading the cabinet.

Specifications

• Model: EWD24BES
• Appliance type: 24-inch dual-zone wine cooler and beverage center
• Installation: Freestanding or fully recessed built-in installation
• Electrical supply: 120 V~, 60 Hz
• Temperature range: 41°F to 64°F for both the upper and lower zones
• Factory temperature setting: 54°F for each compartment
• Maximum stated loading reference: 46 bottles
• Refrigerant: R600a flammable refrigerant
• Required cabinet opening: at least 24 inches wide, 35 inches high, and 25 inches deep
• Ambient operating classes: SN, 50°F to 99°F; N, 61°F to 99°F; ST, 61°F to 100°F; T, 61°F to 109°F

Detailed Description

The EWD24BES 24-inch Dual Zone Wine Cooler uses separate upper and lower temperature controls so wines with different serving requirements can be kept in the same cabinet. The digital control panel displays the selected settings and provides access to operating modes, temperature adjustment, child lock, lighting, and power functions.

Inside the cabinet, adjustable shelves slide forward for access. Open the glass door completely before removing or repositioning a shelf to help protect the door gasket. Shelves may be pulled approximately one-third of the way out for routine bottle access, but they should not be overloaded or covered with foil and similar materials that restrict air circulation.

The door can be reversed when the installation requires the hinge on the opposite side. Because the glass door is heavy, door reversal should be completed with assistance. After changing the hinge position, the door light-switch spacer and upper decorative cover must also be moved to their corresponding positions.

Safety

• The appliance contains R600a refrigerant. Keep it away from flames, sparks, cigarettes, and other ignition sources, and do not puncture or damage the sealed refrigerant circuit.
• Do not store gasoline, aerosol cans with flammable propellant, or other explosive or flammable substances in or near the wine cooler.
• Use a properly grounded 120 V~, 60 Hz outlet. Never remove the grounding prong, and do not use an extension cord, adapter, or power strip.
• Disconnect the appliance from power before servicing, cleaning, or replacing components.
• Keep ventilation openings clear. Adequate airflow helps prevent overheating and supports safe operation.
• Do not place electrical devices inside the storage compartments unless they are specifically recommended for this appliance.
• Children must not play with the wine cooler, climb inside it, or handle its packaging materials.
• Do not touch the compressor or rear metal parts while the appliance is operating because these surfaces may become hot.
• Open the door slowly to reduce the risk of tipping or shelf movement, and do not overload the shelves.
• If a refrigerant leak is suspected, disconnect power, ventilate the room, avoid ignition sources, and have the appliance inspected by qualified personnel.
• If the supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or another qualified professional.
• Keep the power plug accessible after installation.

Setup and Installation

Before first use

1. Remove all exterior and interior packing materials.
2. Keep the cabinet upright for approximately two hours before connecting it to power. This allows the cooling system to settle after transportation.
3. Clean the interior with lukewarm water and a soft cloth.
4. Choose a strong, level floor that can support the fully loaded cooler. Adjust the front leveling leg as needed.
5. Install the appliance indoors in a dry, well-ventilated location away from heat-producing appliances, direct sunlight, moisture, and ignition sources.

Cabinet and electrical requirements

For built-in installation, provide an opening at least 24 inches wide, 35 inches high, and 25 inches deep. Do not block the appliance ventilation openings. If the receptacle is inside adjacent cabinetry, the manual specifies a 1.5-inch diameter cord opening; protect the edge with a bushing or grommet when the cabinet material is metal.

Measure the complete delivery route before moving the cooler. The narrowest doorway or opening must be wider than the appliance dimension passing through it. Avoid installing directly beside a wall when possible so the door can open fully.

Anti-tip bracket

An anti-tip bracket is required for freestanding installation because the appliance may tip when shelves are extended. The bracket may be mounted at the lower left or lower right rear of the unit. Use the supplied bracket hardware and select the fastening method that matches the installation surface.

• Drywall: Secure the wall-side bracket with two screws, ensuring at least one screw enters a wood stud. If the wall has metal studs or similar construction, use the floor installation method instead.
• Wood floor: Fasten the bracket to the floor with the supplied screws, then align the unit with the bracket and secure it using the bolt, lock washer, and flat washer.
• Concrete floor: Drill an approximately 8 mm pilot hole 45 to 55 mm deep, install the expansion screw and hardware, and tighten the bracket securely before attaching the appliance.

After installation, apply light force to test whether the unit tips. If movement occurs, reinstall or reinforce the bracket before using the wine cooler.

Controls and Operation

Temperature adjustment

Use the separate up and down controls for the upper and lower zones. Each press changes the selected temperature by one degree. Both zones adjust from 41°F to 64°F. When a zone reaches either limit, additional presses in that direction will not change the setting.

The display can show temperatures in Celsius or Fahrenheit. Press and hold the designated upper-zone or lower-zone control combination for three seconds to switch between the two scales. The appliance includes power-off memory, so it restores the previous temperature settings after a power interruption.

Operating modes

• Standard: Normal operating mode and the default setting when the appliance is powered on.
• Eco: Energy-saving mode. The interior light remains off, and the display shows Eco. After the door closes, the display and buttons remain active for about five seconds before turning off.
• Demo: Showroom mode. The LED lighting operates, but the appliance does not cool. Do not use this mode for wine storage.
• Sabbath: Turns off the interior light, prevents the door from triggering an alarm, displays Sb, and locks the control panel except for the mode and power controls. Press and hold the mode control for three seconds to exit.

Child lock and power

When first connected, the control panel is unlocked. Press and hold the child-lock control for three seconds to lock the controls. Repeat the three-second press to unlock them.

Press and hold the power control for three seconds to turn the appliance off. Press the power control again to turn it back on. After unplugging, a power failure, or switching the unit off, wait three to five minutes before restarting it.

LED lighting

The LED light and button backlight start in the cold color setting. Press the color control to cycle through cold, blue, and warm illumination.

The lighting control provides four operating choices:

• Default: The door controls the interior light.
• 24Hr: The light remains on for 24 hours after the door closes.
• 30Min: The light remains on for 30 minutes after the door closes.
• 1Min: The light remains on for one minute after the door closes.

In the timed lighting modes, the light is initially at full brightness when the door opens and normally returns to 50 percent after closing. Use the brightness control to cycle through 50, 75, and 100 percent.

Alarms

If the door remains incompletely closed, an alarm sounds after approximately one minute. Close the door fully to preserve cold air and stop the warning.

A high-temperature condition displays HI. If the interior remains above 73°F, the buzzer sounds after one hour. A low-temperature condition displays LO and sounds the alarm. The low-temperature trigger depends on the selected setting: settings of at least 39°F trigger at 32°F, settings from 36°F to below 39°F trigger at approximately 36°F, and settings below 36°F do not activate the low-temperature alarm.

When the cooler is first started, or after it has been off for an extended period, the displayed temperature may differ from the selected setting by several degrees. This temporary variation is normal while the cabinet reaches operating temperature.

Loading and Wine Storage

The stated maximum loading reference is 46 bottles, but the actual arrangement depends on bottle shape and shelf position. The manual illustrates layouts using Bordeaux, Burgundy, and Champagne bottles, so larger or unusually shaped bottles may reduce the usable capacity.

• Store wine in sealed bottles.
• Leave space for air to circulate around the cabinet.
• Do not overload shelves or cover rack gaps with foil or other materials.
• Keep the door closed except when loading, unloading, or checking contents.

Approximate drinking-temperature guidance includes 43°F for non-vintage Champagne and sparkling wine, about 46°F for dry white Semillon or Sauvignon Blanc, around 50°F for many Rieslings, Chardonnays, sweet whites, and vintage Champagne, approximately 55°F for Beaujolais, 61°F for many red Pinot Noir and Grenache or Syrah wines, and up to 64°F for vintage Pinot Noir and several Cabernet or Merlot styles. For general storage of all wine types, the manual suggests approximately 54°F to 57°F.

Adjusting the Shelves

1. Open the door completely.
2. Pull the selected shelf fully forward.
3. Lift the front of the shelf.
4. Hold the shelf track, push the shelf inward, and then lift it to release the rear dampers.

Reverse these actions to reinstall a shelf. Confirm that the shelf is seated securely before placing bottles on it.

Door Reversal

Door reversal requires handling the heavy glass door, so use assistance. Remove the hinge buffer screw and buffer, then remove the hinge covers and the upper and lower hinges. Rotate the door 180 degrees, install the hinge screw and lower hinge cover supplied with the kit, and reinstall the hinge buffer.

Remove the door light-switch spacer from the lower frame and the decorative cover from the upper frame. Swap their positions by rotating the components 180 degrees, then reinstall them. Check that the door is level, the gasket contacts evenly, and the door closes completely before operating the cooler.

Cleaning and Maintenance

Routine cleaning

1. Turn off and unplug the cooler.
2. Remove bottles, shelves, and racks.
3. Clean interior surfaces with warm water and a solution of approximately two tablespoons of baking soda per quart of water.
4. Wash shelves with a mild detergent solution.
5. Use only a lightly damp cloth around the controls and electrical parts, and wring out excess water before cleaning those areas.
6. Clean the exterior with warm water and mild liquid detergent, then rinse and dry it with a clean, soft cloth.

Do not use steam cleaners or flammable cleaning fluids. Regularly clean surfaces that may contact bottles and keep accessible drainage areas clear.

Storage, vacation, and power failure

During a short vacation of less than three weeks, the beverage center may remain operating. For longer storage, remove all bottles, turn off and unplug the appliance, clean and dry the interior thoroughly, and leave the door slightly open to limit mold, condensation, and odors.

After a power failure, keep the door closed as much as possible. Most short interruptions should not significantly affect the interior temperature. If the outage will be extended, take steps to protect the stored wine and beverages.

Moving the appliance

• Remove all bottles and contents.
• Tape shelves and other loose interior parts securely.
• Raise the adjustable leg into the base to help prevent damage.
• Tape the door closed.
• Transport the appliance upright and protect its exterior with a blanket or similar covering.

Troubleshooting

The wine cooler does not operate

Confirm that the plug is fully inserted into the grounded outlet, the appliance is switched on, and the circuit breaker has not tripped or the fuse has not blown. After a shutdown or unplugging, allow three to five minutes before attempting to restart.

The cabinet is not cold enough

Check the selected temperature and verify that Demo mode is not active. A warm room, frequent door opening, an incompletely closed door, an overloaded cabinet, or a damaged or poorly seated gasket can reduce cooling performance. Leave space around bottles and keep internal vents unobstructed.

The appliance cycles frequently

Frequent cycling may result from high room temperature, adding a large quantity of warm contents, opening the door often, an incorrectly set temperature, an incomplete door seal, or a gasket that does not seal properly.

The interior light does not work

Check the power connection, circuit breaker or fuse, light setting, and selected operating mode. Eco and Sabbath modes turn off the interior light. If the bulb or LED assembly has failed, service should be performed by qualified personnel.

Vibration or unusual sounds

Confirm that the appliance is level and standing firmly on the floor. Rattling, gurgling, popping, or crackling can occur during normal refrigerant circulation and as the interior materials expand and contract.

The door will not close properly

Level the appliance, check that shelves are correctly positioned, and inspect the gasket for dirt. If the door has been reversed, verify that the hinges, covers, spacer, and door alignment were reinstalled correctly.

Disposal

Before disposal, disconnect the wine cooler from power and remove the door to help prevent child entrapment. Because the appliance contains R600a, refrigerant recovery must be performed by authorized personnel in accordance with applicable local requirements. Use an authorized disposal facility.

Warranty

The product warranty covers the original customer against defects in materials and workmanship under proper residential use, maintenance, and care. The standard warranty period is one year from the purchase date. If the original customer completes product registration within 90 days of purchase, the stated warranty period extends to two years.

Warranty service requires valid proof of purchase and applies only to the original customer. At the warranty provider’s option, the remedy may be repair, replacement with a new product of similar or better quality, or a refund of the documented purchase price excluding tax after the defective product is returned as directed.

The warranty excludes problems caused by misuse, neglect, improper maintenance, failure to follow instructions, excessive moisture, corrosive conditions, lightning, power surges, incorrect voltage, unauthorized modification, commercial use, ordinary wear, cosmetic damage, transportation, installation, setup, and acts of nature. It is limited to products purchased and serviced in the United States and may be affected if the factory serial number is altered or removed.

Pros & Cons

Pros

• Independent upper and lower temperature settings from 41°F to 64°F.
• Freestanding or built-in installation flexibility.
• Adjustable shelves and a stated loading reference of up to 46 bottles.
• Multiple LED colors, timed lighting modes, and brightness selections.
• Child lock, temperature memory, door-ajar alarm, and high- or low-temperature warnings.
• Reversible door design for different room layouts.

Cons

• Requires a grounded outlet without an extension cord, adapter, or power strip.
• Needs adequate ventilation and an anti-tip bracket for freestanding use.
• Demo mode provides lighting but no cooling and must not be used for storage.
• Temperature performance can be affected by room conditions, door openings, bottle loading, and seal condition.
• Door reversal and refrigerant-related service require careful handling and qualified assistance.