Introduction

The Clapper Sound Activated ON/OFF Switch (Model YA-JJ2772) is a convenient device that allows users to control appliances with a simple clap. Launched on November 3, 2014, this innovative product is manufactured by Joseph Enterprises, Inc., the original creator of The Clapper. Priced at approximately $20, it can manage up to two appliances, making it an ideal solution for hands-free operation in any home environment, enhancing both accessibility and ease of use.

Clapper is a sound activated on and off switch for appliances. The Clapper can operate either one or two appliances by clapping two times to operate the first appliance and three times to operate the second appliance.

The Clapper can also serve as a limited function security device. While in the AWAY mode, almost any noise will turn on the connected appliance(s) to discourage potential intruders. The AWAY mode is also convenient for temporarily turning on a light when entering a dark room such as a garage or basement. No need to clap, any noise will turn on the lights!

For QUICK INSTRUCTIONS on operating your Clapper, please refer to the yellow Quick Tips card. The following are more detailed instructions on how to properly use your Clapper.

DIAGRAM

FEATURES

This model is equipped with three special features: 

• Clap Detection Lights, 
• Auto Sound Sensitivity and the Away Mode.

Specifications 

• Sound-activated technology: Turns appliances on and off with a simple clap.
• Easy installation: No wiring required; simply plug in and use.
• Universal compatibility: Works with most household appliances and lighting fixtures.
• Energy-efficient: Helps reduce standby power consumption.
• Durable design: Built with high-quality materials for long-lasting performance.
• Sensitivity adjustment: Adjustable sensitivity to minimize false triggering.

Description

The Clapper Sound Activated ON/OFF Switch YA-JJ2772 is a sleek and compact device that fits seamlessly into any home decor. Its sound-activated technology allows you to control your appliances with a simple clap, making it a convenient solution for hands-free operation. The device is easy to set up and does not require any complex wiring, making it accessible to users of all skill levels.

The YA-JJ2772 is designed with energy efficiency in mind, helping to reduce standby power consumption and save you money on your energy bills. Its durable construction ensures long-lasting performance, and the adjustable sensitivity feature allows you to tailor the device to your specific needs.

Clapper Sound Activated ON/OFF Switch YA-JJ2772 Operation

HOW TO OPERATE AN APPLIANCE WITH 2 CLAPS

1. Set the three-position switch on the bottom of the unit to the HIGH position.
2. Plug an appliance into the top receptacle of The Clapper. This is the receptacle next to the “II.”
3. Plug The Clapper into the wall socket.
4. Manually turn your appliance's switch to the "on" position.
   (It is okay if your appliance does not activate, go on to step 5)
5. You can now turn your appliance on or off by clapping.
   You don’t have to clap very hard! The clapping sequence is more important than how loudly you clap.

CLAP (pause) CLAP (pause) (pause) (pause)
where each pause is approximately ½ second long. Be sure to pause after the second clap. If the Clapper detects a third clap before the appliance turns on, the appliance connected to the II clap receptacle will not activate. The Clapper will also not activate your appliance if you are clapping too slow. If you are having difficulty, try clapping a bit faster using the clap detection lights described on page 6.

HOW TO OPERATE AN APPLIANCE WITH 3 CLAPS

1. Set the three position switch on the side of the unit to the HIGH position.
2. Plug an appliance into bottom receptacle of The Clapper.
3. Plug The Clapper into the wall socket.
4. Manually turn your appliance's switch to the "on" position.
   (It is okay if your appliance does not activate, go on to step 5)
5. You can now turn your appliance on or off by clapping.
   You don’t have to clap very hard. The clapping sequence is more important than how loudly you clap:

CLAP (pause) CLAP (pause) CLAP (pause)
where each pause is approximately ½ second long. Be sure to pause after the third clap. If the Clapper detects another sound after the third clap but before the appliance turns on, the appliance will not activate. The Clapper will also not activate your appliance if you are clapping too slow. If you are having difficulty, try clapping a bit faster using the clap detection lights described below.

CLAP DETECTION LIGHTS 
Use the three red lights on the face of The Clapper to help you determine the proper way to clap your appliances on or off. A clap detection light will glow when a proper clap (or similar sound) is detected. When the Clapper detects the first clap (or similar sound) the far left light will glow. When clapping a second time, the middle light should glow right next to the far left light.

As long as the Clapper does not detect any other sounds, it will activate the appliance attached to the "II Clap socket." If a third clap is detected, then the third and final light will glow and the appliance connected to the "III Clap socket" will activate. If you clap and the far left and the far right lights glow with the middle light staying dark, it means the clapper does not recognize your claps and will not activate the appliance. This can happen when your claps are too soft, too slow, or too fast for the Clapper to register.

AUTO SOUND SENSITIVITY: 
If room noise is detected or if the 2 clap or 3 clap sequences are not proper, the Clapper will reject the sounds as noise. It indicates that it has rejected the noise by turning the LEFT and RIGHT clap detection lights on and automatically reduces the sensitivity of the Clap detection.

This feature of automatically reducing the clap detection sensitivity helps to reduce background noises from turning on the appliances. The LEFT and RIGHT lights will remain on until the background noise is not detected. You can still clap while the lights are on, but because of the background noise you will need to clap louder. When all of the red lights go off the sensitivity of the Clapper Clap detection is at its greatest.

You may notice the lights glowing occasionally even if you have not clapped. This is not unusual as The Clapper has detected sounds that are similar to a clap. Your appliances should not activate as it would require a second or third sound similar to a clap within the proper time allowed. By observing the clap detection lights you can become familiar with the types of claps (or similar sounds) that will activate your appliances attached to The Clapper.

MANUAL SOUND SENSITIVITY

You can also manually adjust your Clapper to respond to soft or loud claps, as well as adjust for the noise level in your room. Placing the three-position switch on the side of The Clapper to the HIGH position puts The Clapper in the high sensitivity mode. This is helpful if your claps are soft or if The

Clapper is far away. Your appliance, however, may occasionally turn on or off unexpectedly as The Clapper may detect other noises similar to your claps.

Sliding the switch down to LOW will put The Clapper into the low sensitivity mode. This is helpful if there is a lot of external noise in the room that may falsely activate your appliances. By adjusting the three position mode switch to the high or low sensitivity, you will be able to activate your appliances easily and, with less false activation due to external noises. Sliding the switch all the way down to the AWAY position will put The Clapper in the AWAY mode (See next page).

For use in very noisy environments the Clapper has a third sensitivity level.

To activate this sensitivity level: 

1. Put the HIGH –AWAY slide switch into the AWAY position.
2. Slide the switch from AWAY to HIGH back to AWAY 3 times.
3. All 3 red lights will now be on. They will remain on for about 10 seconds and then turn off. Now The Clapper is in the very low sensitivity mode.
4. To return to regular operations just move the slide switch out of the AWAY position.

Setup Guide

To set up the Clapper Sound Activated ON/OFF Switch YA-JJ2772, follow these simple steps:

1. Plug the device into a power outlet.
2. Connect your appliance or lighting fixture to the device's output socket.
3. Adjust the sensitivity setting if necessary to avoid false triggering.
4. Test the device by clapping to turn the appliance on and off.

The setup process is straightforward and requires no technical expertise, making it easy for anyone to get started.

THE AWAY SETTING

The Clapper can also serve as a limited function security device. While in the “AWAY” mode, almost any noise will turn on the connected appliance(s) to discourage potential intruders. The AWAY mode is also convenient for temporarily turning on a light when entering a dark room such as a garage or basement. No need to clap, any noise will turn on the lights!

To operate The Clapper in the AWAY mode

1. Slide the three position switch down to the AWAY position.
2. Both lamps will turn on. This allows you to leave the room with the lights on. After 10 seconds without hearing a noise, both lamps will turn off.
3. The Left Red clap detection light will blink to indicate The Clapper is in the Away Mode.
4. If a sound is heard your lamp(s) will turn on and They will remain on for about 10 minutes and then turn off. Then the Clapper, resets itself until the next sound is detected.

Hints and Tips
If The Clapper does not turn on when clapping:

• Make sure The Clapper is plugged in properly. When The Clapper is first plugged in, the red lights on the front of the Clapper will sequence through a start-up pattern. Wait for these lights to stop flashing before you start to clap. If the red lights do not light up at all, your Clapper is no longer functional.
• Make sure the Appliance is plugged into the Clap II or Clap III socket.
• Make sure the appliance's switch is in the "on" position.
• Make sure the claps are loud enough and have the correct timing. Use the indicator lights to determine if the Clapper is registering your claps. See pages 4 and 5 for the timing of the claps and indicator light usage.

IMPORTANT SAFETY NOTES

1. CAUTION: Risk of Electric Shock and Fire Hazard
2. For adult use only. This is not a toy. This is not intended for use by children.
3. Match wide blade of plug to wide slot, fully insert. For safe use, plug only into exposed wall outlets where a device is ventilated and cannot contact bed covering or other material.
4. Do not use The Clapper with any electrical heating appliances such as toasters, hair dryers, coffee pots, etc.
5. Do not use The Clapper with any appliance that can create a fire hazard with prolonged use.
6. The maximum wattage for an appliance is 200 watts in either outlet. Do not exceed 400 watts total. 200/400 watts, (3.3 Amps.) 120 VAC, 50/60 Hz. General Purpose, Tungsten Electronic Ballast.
7. Do not use with medical equipment.
8. Do not use with inductive loads.
9. Indoor Dry Location Use Only

Troubleshooting

If you encounter any issues with the Clapper Sound Activated ON/OFF Switch YA-JJ2772, here are some common problems and solutions:

• Device not turning on/off: Check if the device is properly plugged in and if the sensitivity setting is too low.
• False triggering: Adjust the sensitivity setting to a lower level or move the device away from noise-prone areas.
• No power to the appliance: Ensure that the appliance is correctly connected to the device's output socket.

Always follow the manufacturer's instructions and safety warnings to ensure safe and effective use of the device.

Pros & Cons

Pros

• Convenient hands-free operation.
• Easy to install and use.
• Energy-efficient and cost-saving.
• Durable and long-lasting design.
• Adjustable sensitivity for customized use.

Cons

• Potential for false triggering if not adjusted properly.
• May not be suitable for very loud environments.
• Some users may find it less reliable than traditional switches.

THIRTY (30) DAY WARRANTY

Joseph Enterprises offers a thirty (30) day limited warranty to the original purchaser of The Clapper. The warranty covers defects in workmanship and materials only. It does not apply to product failures resulting from accidental damage, neglect, misuse or any other cause not associated with defects in workmanship or materials.

Should The Clapper prove to be defective within thirty (30) days from the date of purchase, the product will either be repaired or replaced, at Joseph Enterprises’ discretion, free of charge.

Customer Reviews

Customers have generally praised the Clapper Sound Activated ON/OFF Switch YA-JJ2772 for its ease of use and convenience. Many users have found it particularly helpful for managing lights and appliances in hard-to-reach areas or for individuals with mobility issues. However, some users have reported occasional false triggering and the need for precise sensitivity adjustments.

Common complaints 

Include the device's sensitivity to background noise and the occasional need to reset the device. Despite these minor issues, the overall feedback has been positive, with many users recommending it as a fun and functional addition to any home.