Craftsman CMCF800C1 V20 Cordless Impact Driver Kit User Manual

Content

CRAFTSMAN CMCF800C1 V20 Cordless Impact Driver Kit Manual

The craftsman CMCF800C1 V20 Cordless Impact Driver Kit is a compact 20V MAX cordless impact driver designed for fastening applications that require more speed and torque than a conventional drill. Its high-performance brushed motor delivers up to 1,460 in-lbs of torque, 2,800 RPM, and 3,100 impacts per minute for driving screws, lag bolts, and other compatible fasteners efficiently.

This kit includes the CMCF800 impact driver, one V20 20V MAX lithium-ion battery, and a compatible charger. The 1/4-inch hex quick-change chuck allows fast one-handed bit changes, while the variable-speed trigger helps users control starting speed and fastening depth. An integrated LED work light improves visibility in dim cabinets, garages, and construction areas.

The tool suits homeowners, maintenance technicians, DIY renovators, furniture assemblers, and tradespeople who need a portable fastening tool for wood, metal, and general construction tasks. It is particularly useful for deck hardware, framing screws, shelving, automotive accessories, and other jobs involving repeated fastening.

Because it uses the CRAFTSMAN V20 battery platform, the included battery can also support other compatible V20 tools. Always use impact-rated bits and sockets, select the correct fastener, and avoid treating this impact driver as a substitute for a calibrated torque wrench.

CRAFTSMAN CMCF800C1 Specifications and Key Features

Product type: Cordless 1/4-inch impact driver kit
Battery platform: CRAFTSMAN V20 20V MAX lithium-ion
Motor: Brushed high-performance motor
Maximum torque: Up to 1,460 in-lbs
Maximum speed: Up to 2,800 RPM
Impact rate: Up to 3,100 impacts per minute
Chuck: 1/4-inch hex quick-change chuck
Speed control: Variable-speed trigger
Lighting: Integrated LED work light
Included battery: One V20 20V MAX lithium-ion battery, listed by the manufacturer as 1.5Ah
Included accessories: Battery, charger, impact driver, and compatible driver bit
Warranty: Three-year limited warranty

The impact mechanism is intended to improve fastening performance when resistance increases. Maximum output depends on battery charge, fastener size, material, bit condition, and trigger use. For best results, use sharp impact-rated accessories and allow the tool to reach operating speed before applying heavy pressure.

How to Set Up the CMCF800C1 Impact Driver

Inspect the impact driver, battery, charger, chuck, and bit for visible damage. Do not use damaged equipment.
Connect the charger to a suitable power outlet and insert the V20 battery. Allow the battery to charge fully before the first extended use.
Remove the battery before installing a bit. Pull the quick-change chuck sleeve forward, insert a 1/4-inch hex bit, and release the sleeve. Pull the bit gently to confirm that it is locked.
Insert the charged battery into the tool until it clicks securely into place.
Use the forward/reverse control to select the required direction. Place the control in the center position when storing or transporting the tool.
Press the variable-speed trigger gradually. Start slowly to align the bit, then increase speed as needed.
For dark work areas, position the tool so the LED illuminates the fastener without obstructing the work surface.

Use only compatible V20 batteries and the supplied or approved charger. Wear eye protection, secure loose clothing, keep hands away from the rotating bit, and remove the battery before changing accessories. If the bit slips, stop immediately and install a properly fitting impact-rated bit.

CMCF800C1 Troubleshooting and Maintenance

Tool will not start: Remove and reinstall the battery until it locks into position. Check the battery charge and confirm that the forward/reverse selector is not centered.
Battery will not charge: Inspect the charger connection, outlet, and battery contacts. Let an overheated battery cool before charging.
Bit falls out: Pull the chuck sleeve forward, insert the bit completely, and release the sleeve. Replace worn or damaged bits.
Reduced power: Recharge the battery, use a suitable impact-rated accessory, and avoid excessive side pressure. A heavily loaded or overheated tool may require a cooling period.
Fastener strips or breaks: Reduce trigger speed, verify the bit size, and use the correct fastener for the material. Finish critical joints with a torque-controlled tool.
LED does not illuminate: Confirm that the battery is installed and the trigger is being pressed. If the tool operates but the light remains off, professional service may be required.

No model-specific numeric error-code system is identified for this impact driver, so do not rely on codes from other CRAFTSMAN tools. Keep the housing and ventilation openings clean, store the tool and battery in a dry location, and avoid exposing the battery to excessive heat. For warranty or repair assistance, use the official CRAFTSMAN customer-service channels or call 888-331-4569. Retain the model number, purchase documentation, and a description of the problem when requesting support.

Pros and Cons of the CRAFTSMAN CMCF800C1 V20 Kit

Advantages

Strong fastening output: Up to 1,460 in-lbs of torque is suitable for many household, workshop, and construction fastening tasks.
Fast operation: The 2,800 RPM maximum speed and 3,100 IPM impact rate help complete repetitive jobs quickly.
Convenient kit format: The battery and charger are included, allowing users to begin without purchasing a separate power system.
Easy accessory changes: The 1/4-inch hex quick-change chuck supports rapid bit replacement.
Useful visibility: The integrated LED work light helps illuminate fasteners in cabinets and other confined areas.
Expandable platform: The V20 battery is compatible with other CRAFTSMAN V20 tools.

Limitations

Brushed motor: Compared with brushless impact drivers, this design may offer less efficiency and runtime under heavy use.
Single operating range: It does not provide the multi-mode torque control found on some advanced professional models.
Limited battery capacity: The included 1.5Ah battery is convenient and light but may require more frequent charging during continuous work.
Not a torque wrench: Maximum torque is not a precise fastening setting, so safety-critical fasteners require calibrated torque control.

The craftsman CMCF800C1 V20 Cordless Impact Driver Kit is best for DIY projects, maintenance, assembly, and general construction. Users needing extended runtime, brushless efficiency, precision torque modes, or heavy-duty daily production may prefer a higher-tier impact driver.

Frequently Asked Questions

What battery does the CMCF800C1 use?

The tool uses CRAFTSMAN V20 20V MAX lithium-ion batteries. The kit includes one 1.5Ah battery and a compatible charger.

What is the maximum torque of this impact driver?

The CMCF800 impact driver is rated for up to 1,460 in-lbs of torque. Actual fastening performance varies with the fastener, material, bit, battery charge, and technique.

Can it drill holes?

It can drive compatible hex-shank drill bits, but a standard drill is generally better for controlled drilling and applications requiring a conventional chuck.

What accessories should be used?

Use 1/4-inch hex accessories rated for impact tools. Replace bits that are rounded, cracked, excessively worn, or unable to hold securely in the chuck.

Does the kit include a warranty?

The manufacturer lists a three-year limited warranty. Keep proof of purchase and contact official CRAFTSMAN support for current warranty terms and service instructions.

PDF

Faqs

How do I set up the CRAFTSMAN CMCF800C1 V20 Cordless Impact Driver Kit for the first time?

Charge the included V20 lithium-ion battery using the supplied CRAFTSMAN charger, then slide it into the impact driver until it locks securely. Select a compatible 1/4-inch hex impact-rated bit and pull the quick-release chuck forward while inserting the bit. Release the chuck to secure it, check that the forward/reverse control is centered before starting, and briefly test the tool at low trigger pressure.

Which batteries and chargers are compatible with the CRAFTSMAN CMCF800C1 V20 Cordless Impact Driver Kit?

Use CRAFTSMAN V20 MAX battery packs with the CMCF800 impact driver and charge them only with compatible CRAFTSMAN V20 chargers. Do not force a battery that does not slide smoothly into the tool, and avoid mixing chargers from other voltage platforms. Before installation, inspect the battery terminals for dirt, moisture, or damage. Remove the battery when transporting, storing, or changing bits.

Why is my CRAFTSMAN CMCF800C1 impact driver not starting after inserting the battery?

First, remove and reinstall the battery until both release buttons or locking points engage fully. Check that the battery has charge and that the forward/reverse selector is not positioned in the center lockout position. Inspect the trigger and battery contacts for debris or damage. If the charger indicates a fault, allow the battery to cool and try again. Stop using the tool if it still fails or shows overheating, smoke, or unusual damage.

How do I prevent stripped screws when using the CRAFTSMAN CMCF800C1 V20 Cordless Impact Driver Kit?

Use the correct bit type and size, preferably an impact-rated 1/4-inch hex bit. Keep the driver aligned with the fastener so the bit does not cam out, and begin with gentle trigger pressure. Let the bit seat before increasing speed, especially with wood screws or smaller fasteners. For delicate work, finish tightening manually rather than relying on impact action, and use a pilot hole when the material requires one.

What type of bits can I use with the CRAFTSMAN CMCF800C1 impact driver?

The CMCF800 uses a 1/4-inch hex quick-release chuck, so it accepts standard 1/4-inch hex accessories that are designed for impact-driver use. Choose bits, nut setters, and adapters rated for impact applications because ordinary drill bits can break under repeated impact force. Pull the chuck collar forward to install or remove an accessory, and check that the bit is fully retained before operating the tool.

How can I get the best performance from the CRAFTSMAN CMCF800C1 V20 impact driver?

Start with a fully charged battery and a sharp, undamaged impact-rated bit. Keep the bit straight against the fastener and apply steady forward pressure instead of forcing the tool. Use the variable-speed trigger to control starting speed and reduce slipping. The driver provides high torque for larger fastening tasks, but avoid using maximum power continuously on small screws, soft materials, or fasteners that can be over-tightened.

Why does the CRAFTSMAN CMCF800C1 battery or motor become hot during use?

Heat can increase when driving long fasteners, working continuously, using a dull bit, or operating under heavy load. Release the trigger and allow the impact driver and battery to cool naturally in a dry, ventilated area. Do not cover the tool or place a hot battery on a heat-sensitive surface. If excessive heat occurs during light work, inspect the bit, fastener, battery contacts, and tool for binding or damage.

How should I clean and store the CRAFTSMAN CMCF800C1 impact driver kit?

Remove the battery before cleaning, then wipe the housing, chuck, and ventilation openings with a dry or slightly damp cloth. Keep dust and metal particles out of the chuck, and do not use solvents or immerse the tool in liquid. Store the impact driver, battery, charger, and bits in a cool, dry location away from moisture and extreme heat. Remove the battery before long-term storage and recharge it according to the battery instructions.