Usage: Delonghi Electric Oil Filled Radiator Instruction Manual

Content

Overview

The Electric Oil Filled Radiator is a portable room heater designed to deliver steady, quiet warmth with simple manual controls and optional timer-based operation. It is best suited to enclosed indoor spaces where you want consistent background heat and a practical way to reduce cold draughts.

This style of oil filled radiator works especially well in bedrooms, studies, and living areas where even heat distribution matters more than fast fan-style heating. It is also a useful choice for users who want a low-maintenance electric heater with built-in safety features and basic energy-saving settings.

Specifications

Product type: Electric oil filled radiator
Power selector settings: 0, 1, 2, and 3 depending on the model
Thermostat: Adjustable mechanical thermostat with automatic temperature control
Timer: 24-hour mechanical timer on timer-equipped models
Timer programming: 96 teeth, each representing 15 minutes
Programmable cycles: Up to 48 on/off cycles in 24 hours
Mobility: Wheels with an Easy Wheel system on supported models
Safety features: Overheat protection and tilt-switch on some models
Minimum room size: 4 m²

Detailed description

The Electric Oil Filled Radiator heats internal oil and uses that stored heat to warm the room gradually and evenly. Because the heat comes from the warmed oil and metal surface rather than exposed flames, the unit is intended for calm, continuous heating rather than rapid bursts of heat.

Main controls include an indicator light, thermostat pointer, timer dial on timer versions, power selector, and castor wheels. Models with the Easy Wheel system are designed to be tipped onto a soft surface during setup so the wheels can be opened outward, then returned upright for use.

For normal use, the radiator should always stay vertical with the controls at the top and the wheels at the bottom. This orientation supports safe operation and proper heat distribution.

Safety

Several precautions are essential when using an Electric Oil Filled Radiator. The unit must never be covered during operation, since blocking heat flow can cause overheating and trigger the safety cut-out.

Keep the heater away from bathrooms, showers, sinks, and swimming pools, and never use it in rooms smaller than 4 m². It also should not sit directly under a fixed power socket or be placed near combustible materials such as clothing, linen, or furniture in a way that could create contact with hot surfaces.

Children should not play with the appliance, and anyone using it should understand that the surface can become hot. If the power cord is damaged, it must be replaced by a qualified person to avoid risk. Repairs that require opening the oil-filled body must only be done by authorized service personnel.

When first switched on, the heater may give off a slight new-appliance smell and may make light squeaking noises. Running it at maximum output for at least two hours while ventilating the room helps reduce that odor.

Some models include a tilt-switch that turns the heater off if it tips over. If overheating occurs, a built-in protection device shuts the unit down and professional service is required before it can be used again.

Setup and operation

Positioning the heater

Place the Electric Oil Filled Radiator under the coldest window in the room or in another spot where you want to reduce draughts. This helps the heater counter incoming cold air and improve comfort.

Connecting to power

Plug the unit into a properly functioning socket with correct polarity. Before connecting, keep fabric, furniture, and flammable material away from the power point and heater body.

Turning the heater on

Set the thermostat fully to maximum before selecting a heat level. Then choose power level 1 for minimum heat, 2 for medium heat, or 3 for maximum heat. The indicator light comes on when the selected heating stage is active.

After the room reaches a comfortable temperature, turn the thermostat slowly clockwise until you hear a click. From that point on, the thermostat maintains the room temperature automatically by cycling the heater on and off as needed.

Saving energy

Once the radiator is warm, lower power output to level 1 or 2 for more economical running. On models with three heat settings, this is especially useful in spring, autumn, and other mild conditions. A frost protection mode is also available: with the thermostat set to the frost position and a heat level selected, the radiator maintains a low background temperature of about 5°C to help prevent freezing.

Using the timer

Timer-equipped models use a 24-hour mechanical clock, so the dial must be set to the current time before programming. Turn the timer clockwise only, aligning the correct time with the pointer. The timer will not work unless the unit is plugged in, and it must be reset if power is disconnected.

Each of the 96 teeth on the dial represents 15 minutes. Push the teeth for the periods when you want the radiator to run and leave the other teeth in the opposite position to switch the heater off during those time blocks. This allows the heater to follow a daily heating pattern with quarter-hour precision.

On models with a selector for timer control, manual mode and programmed mode can be chosen with the selector position. Setting the selector to 0 turns the appliance off completely, while the timer clock still retains the current time when the unit remains connected to power.

Cleaning and maintenance

Always unplug the heater and let it cool fully before cleaning or moving it. Wipe the exterior with a soft damp cloth and avoid detergents or abrasive cleaners, since these can damage the finish.

If the Electric Oil Filled Radiator will not be used for a long period, wrap the cable around the built-in cable tidy and store the appliance in a dry place. If the heater malfunctions or you are unsure about its condition, do not attempt home repair because opening the unit can create fire or electric shock risk.

Troubleshooting

If the radiator stops heating, first check whether the power selector is set to 0, whether the thermostat is too low, or whether the timer is holding the unit in an off period. On timer models, also confirm that the current time has been set correctly and that the teeth match the desired heating schedule.

If the heater shuts down unexpectedly, the overheat protection may have been triggered. In that case, unplug the unit, allow it to cool, and contact service support for inspection before using it again.

If a tilt-switch model turns off after being knocked over, return it to the upright position to restore operation. If oil leakage, persistent noise, or other abnormal behavior appears, stop using the heater and arrange professional service.

Pros & Cons

Pros: Quiet operation with steady heat output
Pros: Adjustable thermostat and multiple power levels for flexible comfort
Pros: Timer models support scheduled heating in 15-minute steps
Pros: Overheat protection and tilt-switch safety features on supported models
Cons: Slower to warm up than direct-fan heaters
Cons: Must stay upright and should not be used in small rooms or damp areas
Cons: Timer must be set correctly after power loss

PDF

Faqs

How do I set up an Electric Oil Filled Radiator for first use?

Place the radiator on a soft surface if you need to unfold the wheels, then turn it upright before use. The appliance must always be kept vertical, with the wheels at the bottom and controls at the top. Position it where you need heat, ideally under the coldest window, but never directly beneath a fixed power point. Before the first use, run it on maximum power for at least two hours and ventilate the room to clear the new smell.

What is the correct way to turn on and adjust the heat on an oil filled radiator?

To start heating, plug the radiator into a working socket, turn the thermostat fully to maximum, and select the desired power level. Most models offer 1 for minimum, 2 for medium, and 3 for maximum heat. Once the room reaches a comfortable temperature, slowly turn the thermostat until you hear a click. The radiator will then cycle automatically to hold that temperature without needing constant adjustment.

How does the thermostat on an Electric Oil Filled Radiator work?

The thermostat controls the room temperature by switching the radiator on and off once your chosen setting is reached. After the room warms up, turn the thermostat slowly clockwise until you hear a click, then stop. That point becomes your target temperature. If the room gets colder, the radiator will restart automatically. This makes the heater more efficient and helps keep comfort steady without wasting energy.

Can I use the frost protection function on an oil filled radiator?

Yes, the frost protection setting is designed to prevent freezing with very low energy use. With the thermostat in the frost protection position and a power level selected, the radiator keeps the room at about 5°C. This is useful in spare rooms, garages, or holiday homes where you want to avoid frost damage without fully heating the space. It is not a full heating mode, but a low-temperature safeguard.

How do I use the timer on a timer-equipped Electric Oil Filled Radiator?

First, set the clock by turning the timer dial clockwise until the current time lines up with the pointer. Then use the 15-minute teeth to mark the periods when you do not want heat. Push the teeth inward for times when the radiator should run, and leave the others out. Finally, choose the power level. The timer stays accurate only while the radiator remains plugged in.

Why should I never cover an oil filled radiator while it is running?

Covering the radiator can trap heat and cause a dangerous rise in temperature. The safety system may switch the appliance off, but covering it is still unsafe and should never be done. Keep clothing, towels, furniture, and other flammable items away from the heater during operation. The radiator is designed to warm the room through open air circulation, not to dry items or operate under any cover.

What should I do if the Electric Oil Filled Radiator stops working after overheating?

If the radiator shuts down because of overheating, turn it off, unplug it, and let it cool completely. Check that it is standing upright and that nothing is blocking heat flow or covering it. Some models have a safety device that requires service support before they can be used again. If the radiator has a tilt-switch, simply placing it upright may restore normal operation once it has cooled.

How do I clean and maintain an Electric Oil Filled Radiator safely?

Before cleaning, unplug the radiator and wait until it is cool. Wipe it with a soft, damp cloth and avoid detergents, abrasive products, solvents, or spraying water onto the appliance. The heater does not require special maintenance beyond regular dust removal. If you will not use it for a long time, wrap the cable neatly and store the radiator in a dry place to help protect it from damage.