Dewalt FLEXVOLT 6 Amp Charger DCB1106 User Manual

Content

DEWALT FLEXVOLT 6 Amp Charger DCB1106 Manual

Introduction

The DEWALT FLEXVOLT 6 Amp Charger DCB1106 is a versatile lithium-ion battery charger designed for DEWALT 12V MAX, 20V MAX, and FLEXVOLT battery packs. Its broad compatibility makes it a practical charging solution for contractors, maintenance professionals, woodworkers, automotive technicians, and serious DIY users who operate several DEWALT cordless tools.

With a 6-amp charging output, the DCB1106 is built to recharge compatible battery packs efficiently between tasks. A two-stage LED state-of-charge indicator communicates charging progress and helps identify when a battery is ready to use. The charger requires no manual voltage adjustment, so users can insert a compatible battery and allow the charger to manage the charging process.

This DEWALT battery charger is especially useful on jobsites where one charger must support multiple cordless tool platforms. It can help reduce the need for separate chargers while keeping spare batteries organized and ready for drills, saws, grinders, outdoor equipment, and other compatible products.

For safe operation, use the charger only with compatible DEWALT lithium-ion battery packs, connect it to an appropriate power source, and follow the instructions in the official manual. The DCB1106 is best suited to users who value platform flexibility, straightforward operation, and faster charging than many basic single-output chargers.

DEWALT DCB1106 Specifications and Features

Model: DCB1106
Charger type: 6-amp lithium-ion battery charger
Battery compatibility: DEWALT 12V MAX, 20V MAX, and FLEXVOLT battery packs
Input rating: 120 volts AC, 60 Hz
Charging output: 6 amps
Battery chemistry: Designed for compatible DEWALT lithium-ion packs
Charge control: Automatic operation with no user voltage adjustment
Charge indication: Two-stage LED state-of-charge indicator
Primary function: Rechargeable battery charging for compatible DEWALT cordless tools
Connectivity: No Bluetooth pairing, application setup, or wireless connection is required

The charger is intended for use with compatible DEWALT battery packs rather than third-party or incompatible batteries. Charging time varies according to battery capacity, temperature, pack condition, and remaining charge. A larger FLEXVOLT pack generally requires more time than a smaller compact battery, even when using the same charger.

How to Set Up and Use the DEWALT FLEXVOLT 6 Amp Charger DCB1106

Place the charger on a dry, stable, and well-ventilated surface away from heat, moisture, and flammable materials.
Inspect the charger, power cord, battery contacts, and battery housing for damage, dirt, or moisture.
Connect the charger to a suitable 120-volt AC outlet. Do not use the charger if the cord or plug is damaged.
Align the battery pack with the charger rails and slide it into place until it is firmly seated.
Check the LED indicator to confirm that charging has started.
Leave the battery in the charger until the indicator shows that charging is complete.
Remove the battery by pressing its release button and sliding it out of the charger.
Disconnect the charger from the outlet when it is not required for extended periods.

No pairing or configuration is needed. The charger automatically operates with compatible DEWALT 12V MAX, 20V MAX, and FLEXVOLT packs. Never force a battery into the slot, place a wet or visibly damaged pack on the charger, cover the ventilation openings, or attempt to charge non-rechargeable batteries. If charging does not begin, unplug the charger, reseat the battery, and allow an overheated battery to return to room temperature.

DCB1106 Troubleshooting Guide

Charger does not start

Confirm that the power cord is fully inserted and the outlet is working by testing another approved device. Inspect the cord and plug for damage. If the charger remains inactive, disconnect it and have the charger and battery evaluated by an authorized DEWALT service center.

Battery does not charge

Remove and reinstall the battery to ensure that the contacts are aligned. Clean dry debris from the contacts with a soft cloth. A battery that is too hot or too cold may require time to reach a suitable temperature before charging begins. Do not use a battery with cracked housing, leaking material, burned contacts, or other visible damage.

Charging appears slow

Charging time depends on battery capacity, remaining charge, temperature, and battery condition. Move the charger to a cooler, ventilated location and avoid using extension cords that are unsuitable for the charger’s electrical load.

LED behavior is unexpected

Refer to the indicator descriptions in the DCB1106 instruction manual. If the LED continues to indicate a problem after the battery is reseated and allowed to reach room temperature, stop using the equipment and request service.

The DCB1106 does not require user-configured error codes. For warranty questions, repair claims, manuals, and service-center assistance, contact DEWALT Customer Care at 1-800-433-9258 or use DEWALT’s official online support request system. Keep the model number and purchase information available.

DEWALT DCB1106 Pros and Cons

Pros

Wide platform compatibility: One charger supports DEWALT 12V MAX, 20V MAX, and FLEXVOLT batteries.
6-amp charging output: Provides a strong charging rate for users managing several cordless tools.
Simple operation: Automatic charging eliminates manual voltage selection and reduces setup steps.
Clear status feedback: The two-stage LED indicator makes it easier to monitor charging progress.
Useful for mixed tool collections: Contractors can charge compact drill batteries and larger FLEXVOLT packs on the same charger.

Cons

Single-battery charging: Only one battery can be charged at a time, unlike multi-port chargers.
No wireless features: The charger does not provide Bluetooth monitoring, application controls, or remote notifications.
Charging time varies: Large-capacity FLEXVOLT packs naturally take longer to charge than compact batteries.
Platform-specific design: It is intended for compatible DEWALT batteries and is not a universal charger for other brands.

The DCB1106 suits users who need one dependable charger for several DEWALT battery families. A multi-port charger may be more appropriate for crews charging multiple packs simultaneously, while users with only one small battery may prefer a more compact basic charger.

PDF

Faqs

How do I set up the dewalt FLEXVOLT 6 Amp Charger DCB1106 for the first time?

Place the dewalt FLEXVOLT 6 Amp Charger DCB1106 on a dry, ventilated surface near a standard 120V household outlet. Plug in the charger, then slide a compatible DEWALT battery into the charging bay until it is fully seated. The Stage 1 light should blink when charging begins. Avoid using extension cords that are damaged or unsuitable for the charger, and keep the charger away from moisture, heat sources, and metal objects that could contact the battery terminals.

Which batteries are compatible with the dewalt FLEXVOLT 6 Amp Charger DCB1106?

The dewalt FLEXVOLT 6 Amp Charger DCB1106 is designed for DEWALT 12V MAX, 20V MAX lithium-ion, and FLEXVOLT battery packs. FLEXVOLT batteries can operate at different tool voltages, while the charger automatically uses the appropriate charging system for the inserted pack. Do not attempt to charge batteries from other brands, damaged packs, Ni-Cd batteries, or batteries with incompatible terminals. Check the battery label and DEWALT documentation if compatibility is uncertain.

What do the two LED stages mean on the dewalt FLEXVOLT 6 Amp Charger DCB1106?

The two-stage LED system on the dewalt FLEXVOLT 6 Amp Charger DCB1106 provides more detailed charging information. A blinking Stage 1 light indicates the charger is replenishing most of the battery capacity. When Stage 1 remains continuously lit, that portion is complete and Stage 2 begins blinking for the final top-off charge. The battery is fully charged when both Stage 1 and Stage 2 indicators remain continuously illuminated.

What should I do if the dewalt FLEXVOLT 6 Amp Charger DCB1106 does not start charging?

First, unplug the dewalt FLEXVOLT 6 Amp Charger DCB1106 and inspect the outlet by testing another device. Reconnect the charger, then remove and firmly reseat the battery until it locks into position. Check the battery contacts for dirt, moisture, or visible damage, and allow an overheated or cold battery to return to room temperature. If the charger still shows no charging indication, test with another compatible DEWALT battery and discontinue use if abnormal behavior continues.

Why is the dewalt FLEXVOLT 6 Amp Charger DCB1106 charging slowly?

Charging speed can vary with battery capacity, pack temperature, battery age, and the remaining charge level. A hot or cold battery may temporarily charge more slowly while the protection system manages its temperature. Move the dewalt FLEXVOLT 6 Amp Charger DCB1106 to a cool, ventilated location and make sure the battery is fully seated. Avoid charging in direct sunlight or near heaters. If one battery consistently charges unusually slowly while others work normally, inspect that battery for damage.

Can I leave a battery on the dewalt FLEXVOLT 6 Amp Charger DCB1106 after it is fully charged?

Remove the battery from the dewalt FLEXVOLT 6 Amp Charger DCB1106 after both charging stages remain continuously lit and the pack is full. Disconnect the charger when it is not needed, especially during storage or transport. Do not cover the charger or battery while charging, and never leave a damaged, swollen, leaking, or unusually hot battery connected. Following these practices helps reduce unnecessary heat and supports safer battery and charger storage.

How can I get the best performance from the dewalt FLEXVOLT 6 Amp Charger DCB1106?

For efficient charging, use the dewalt FLEXVOLT 6 Amp Charger DCB1106 with clean, dry battery contacts and a stable 120V outlet. Keep airflow around the charger and avoid placing it on soft materials that can block ventilation. Let batteries cool after demanding tool use before charging, and use the correct battery for the tool’s voltage requirement. Charging batteries in a moderate indoor environment can also help maintain consistent performance and reduce heat-related interruptions.

How should I clean and store the dewalt FLEXVOLT 6 Amp Charger DCB1106?

Unplug the dewalt FLEXVOLT 6 Amp Charger DCB1106 before cleaning. Wipe its exterior with a dry or slightly damp cloth, and use a soft, dry brush to remove dust from the charging slot and ventilation areas. Do not spray cleaner into the charger, immerse it in water, or insert metal tools into the contacts. Store the charger and batteries in a clean, dry location away from excessive heat, moisture, and loose metal objects.