Dji Avata 360 Aircraft DVN3NT User Manual

Content

DJI Avata 360 Aircraft DVN3NT Manual and Setup Guide

Introduction

The DJI Avata 360 Aircraft DVN3NT is a compact 360-degree camera drone designed for immersive aerial photography, action footage, travel videos, and creative perspective changes. Its dual-camera system captures native 360-degree video, allowing you to reframe the viewing angle after recording instead of aiming the aircraft perfectly during flight.

The aircraft supports up to 8K 360-degree video at 60 frames per second and can also operate in single-lens mode for conventional wide-angle footage. This dual-purpose design makes it suitable for creators who want one aircraft for virtual-reality content, social-media clips, scenic recording, and dynamic follow or fly-through shots. High-resolution capture also allows a recorded 360-degree scene to be cropped into standard horizontal or vertical video.

Large pixels, a wide-aperture lens system, and high dynamic range help preserve detail in bright outdoor scenes and lower-light environments. The DJI O4+ video transmission system provides a high-definition live view and strong interference resistance when used in supported regions.

This guide is intended for new drone owners, content creators, travelers, and experienced pilots who need a practical DJI Avata 360 aircraft manual. Always follow local aviation regulations, maintain visual awareness of the aircraft, and read the official safety documentation supplied with the exact package.

DJI Avata 360 Specifications and Key Features

Camera design: Dual square CMOS sensors for native 360-degree capture.
360-degree video: Up to 8K resolution at 60, 50, 48, 30, 25, or 24 frames per second in a 2:1 format.
Additional video mode: 6K 360-degree recording at supported frame rates.
Single-lens video: Up to 4K at 60 frames per second, with 4:3 and 16:9 recording options.
Lens aperture: f/1.9 for improved light gathering.
Pixel size: Approximately 2.4 μm pixels for enhanced low-light performance.
Dynamic range: Up to 13.5 stops under supported recording conditions.
Photo capture: Up to 120-megapixel 360-degree photographs.
Video encoding: 360-degree video uses OSV, while standard video uses HEVC in supported modes.
Transmission: DJI O4+ transmission with up to 1080p/60fps live video under suitable conditions.
Maximum transmission range: The advertised range varies by region and regulatory environment; use the regional specification for your location.
Compatible control options: Supported DJI remote controllers and motion-control equipment vary by package.

Detailed DJI Avata 360 Aircraft Description

The DJI Avata 360 Aircraft DVN3NT combines a multirotor flight platform with two opposing cameras. During flight, both lenses record overlapping views that are stitched into a spherical image. This approach lets editors choose the final direction, horizon, and crop after the flight. It is useful for mountain trails, cycling routes, vehicle-based filming, indoor-compatible creative work where permitted, and scenic travel footage.

The aircraft’s 360-degree camera system is built around two square CMOS sensors and wide-angle lenses. The body is designed for portability while protecting the imaging and flight systems during normal handling. Avoid touching the lenses, placing the aircraft on dusty surfaces, or storing it where heat and moisture can accumulate.

Controls depend on the paired remote controller. Before each flight, check the live view, flight mode, battery status, satellite or positioning status, and return-to-home settings. After use, power down the aircraft before removing the battery, then inspect the propellers, camera covers, landing areas, and vents. Clean the exterior with a soft, dry microfiber cloth. Use only approved methods for cleaning lenses and never apply liquid directly to the camera housing.

DJI Avata 360 Setup Guide and Pairing Instructions

Inspect the aircraft, propellers, camera lenses, battery, controller, and charging equipment for visible damage.
Charge the aircraft battery and controller using compatible DJI charging equipment. Do not operate with a swollen, leaking, overheated, or damaged battery.
Install a supported microSD card if internal storage is insufficient for the selected resolution and frame rate.
Remove the gimbal or lens protection components only when preparing for flight, and store them safely afterward.
Power on the controller and aircraft according to the supplied instructions.
Open the DJI flight application or use the supported display and controller interface. Sign in if required, then complete activation and firmware updates.
Pair the aircraft and controller when they are not already linked. Keep both devices close together during pairing.
Set the home point, return-to-home altitude, obstacle-sensing preferences, control sensitivity, recording format, and video transmission settings.
Choose a clear outdoor takeoff area away from people, vehicles, trees, power lines, and electromagnetic interference.
Start the motors only after confirming that the propellers are correctly installed and the flight area is clear.

If pairing fails, restart both devices, confirm adequate battery charge, update compatible firmware, and repeat the linking process. Do not fly until the application reports normal aircraft status and the controller provides a stable live view.

DJI Avata 360 Troubleshooting Guide

Aircraft will not power on

Check that the battery is fully seated and sufficiently charged. Inspect the battery contacts and charging equipment. If the battery is swollen, unusually hot, or physically damaged, stop using it and contact DJI support.

Controller cannot connect

Place the controller and aircraft close together, restart both units, and confirm that they are compatible with the aircraft package. Repeat the pairing process and install available firmware updates before attempting another flight.

Live video is delayed or unstable

Move away from dense interference, metal structures, power infrastructure, and crowded wireless environments. Maintain a clear line of sight, reduce the distance, and use the approved regional transmission settings. Video transmission quality can decrease before control quality, so land promptly if the connection becomes unreliable.

Recording stops or files are missing

Use a compatible, properly formatted microSD card with adequate free capacity. Avoid removing the card or switching off the aircraft while recording. Allow the camera to finish writing files after landing.

Lens image appears soft or distorted

Clean both lenses with an appropriate microfiber cloth and check for fingerprints, dust, moisture, or protective-film residue. Do not fly with damaged lens covers. If stitching remains abnormal after cleaning and restarting, preserve sample files and contact DJI support.

Exact warning messages and error codes can vary by firmware and controller. Record the displayed code, aircraft serial number, firmware version, flight conditions, and a description of the problem before contacting DJI Support through the official DJI support channel or the documentation supplied with the aircraft. Warranty eligibility depends on the applicable terms, region, damage type, and maintenance history.

DJI Avata 360 Pros and Cons

Pros

Flexible framing: 360-degree capture lets creators select the viewing direction during editing.
High-resolution output: 8K/60fps 360-degree recording provides detail for reframing and cropping.
Two shooting styles: Users can switch between immersive 360-degree footage and conventional single-lens video.
Low-light capability: Large pixels, an f/1.9 aperture, and high dynamic range support challenging lighting conditions.
Creative applications: The aircraft suits travel films, action footage, virtual-reality media, and social-media reframing.

Cons

Large files: High-resolution 360-degree video requires substantial storage and a capable editing device.
Post-production required: Stitching, reframing, and exporting can take longer than standard drone footage.
Lens vulnerability: Exposed wide-angle lenses require careful handling and regular cleaning.
Regulatory responsibility: Pilots must comply with local drone laws, registration requirements, privacy rules, and operating limits.
Not ideal for every pilot: Users who only need simple point-and-shoot aerial video may prefer a conventional camera drone with a traditional gimbal.

The DJI Avata 360 Aircraft DVN3NT is best suited to creators who value reframing freedom and immersive footage. A standard camera drone may be a better choice for users prioritizing a simpler editing workflow, traditional optical composition, or a stabilized single-camera setup.

PDF

Faqs

How do I set up the DJI Avata 360 Aircraft DVN3NT for the first flight?

Fully charge the Intelligent Flight Battery and compatible remote controller, then install the DJI Fly app. Remove the gimbal protector, insert the battery, attach the remote controller sticks, and power on the aircraft and controller. Follow the in-app activation and pairing instructions before flying. Install any available firmware updates, confirm the propellers and sensors are unobstructed, and complete the preflight checklist in an open area.

What should I do if the DJI Avata 360 Aircraft DVN3NT will not activate or connect?

Confirm that the DJI Fly app is installed and updated, Bluetooth or wireless permissions are enabled, and both the aircraft and remote controller have sufficient battery power. Restart the app and both devices, then retry the pairing process in a location away from strong wireless interference. If activation still fails, connect the aircraft as directed in DJI Fly and check for firmware updates. Do not fly until activation and connection are complete.

Which remote controller and app are required for the DJI Avata 360 Aircraft DVN3NT?

The DJI Avata 360 Aircraft DVN3NT must be activated using a compatible DJI remote controller and the DJI Fly app. Controller compatibility can depend on firmware and package configuration, so verify the supported controller list in the current DJI documentation before purchasing accessories. Charge the controller fully, mount its control sticks, and update both the controller and aircraft through DJI Fly for the most reliable connection and flight experience.

How can I safely use the DJI Avata 360 Aircraft DVN3NT auto takeoff and landing feature?

Use auto takeoff and landing only in a clear, level area with adequate space above and around the aircraft. In the DJI Fly flight interface, select the appropriate takeoff or landing control and follow the on-screen confirmation prompt. Keep the aircraft within sight and be ready to cancel the action if people, obstacles, or unexpected wind appear. After landing, keep the landing control engaged as instructed until the motors stop.

How do I perform flips and other Easy ACRO maneuvers on the DJI Avata 360 Aircraft DVN3NT?

Easy ACRO maneuvers, such as flips, 180-degree drifts, lateral movements, and Juicy Flick, are accessed through the flight interface's Fancy Flight or Trick Flight controls. Practice only after learning normal flight controls and checking that the area is open, unobstructed, and legally suitable. Maintain enough altitude and battery reserve, avoid crowds, and use the on-screen maneuver selection carefully. Stop practicing immediately if the aircraft behaves unexpectedly.

Why is the DJI Avata 360 Aircraft DVN3NT video feed delayed or unstable?

Video delay or an unstable live feed can result from distance, obstacles, radio interference, low battery, or outdated firmware. Keep the aircraft and remote controller within the recommended operating range and maintain a clear line of sight. Move away from dense wireless activity, restart both devices, and update the aircraft, controller, and DJI Fly app. If the feed remains unreliable, land promptly rather than continuing a flight without dependable control or situational awareness.

How can I improve DJI Avata 360 Aircraft DVN3NT flight performance and battery life?

Fully charge the flight battery before each session and avoid launching with a battery that is cold, damaged, swollen, or unusually depleted. Fly smoothly instead of making repeated hard accelerations, and account for wind because aggressive corrections consume more power. Keep the propellers clean and undamaged, remove unnecessary accessories, and monitor battery warnings in DJI Fly. Plan the return and landing early so the aircraft never depends on the final battery percentage.

What maintenance does the DJI Avata 360 Aircraft DVN3NT need after flying?

After each flight, inspect the propellers, motors, aircraft body, camera area, and battery for cracks, dirt, moisture, or impact damage. Remove dust with a soft, dry brush and keep water away from openings and electronic components. Check that propellers are secure and replace damaged parts rather than attempting to straighten them. Store batteries partially charged in a cool, dry place, and avoid charging immediately after a hot flight until the battery has cooled.