Dji Osmo 360 Action Camera User Manual

Content

DJI Osmo 360 Action Camera Manual

The dji Osmo 360 Action Camera is a compact 360-degree camera designed for travel, outdoor sports, motorcycle recording, vlogging, and immersive content creation. Its dual square sensors capture native 8K panoramic video, allowing users to record the entire scene and choose the viewing angle later during editing.

With two 1/1.1-inch square CMOS sensors, an f/1.9 aperture, 2.4 μm pixels, and up to 13.5 stops of dynamic range, the camera is designed to preserve detail in bright skies, shaded areas, and challenging low-light scenes. The high-brightness OLED touchscreen provides direct access to shooting modes, settings, playback, and system controls.

The camera is suitable for creators who want reframing flexibility without operating a second camera. It can record panoramic footage for virtual tours and action sports, while single-lens mode supports conventional wide-angle videos for social media and everyday recording. Built-in storage, Wi-Fi 6 connectivity, USB 3.1 transfer, voice control, and compatibility with the DJI Mimo app make file management and remote operation more convenient.

This guide explains the DJI Osmo 360 setup process, core specifications, operating precautions, troubleshooting steps, and practical advantages. It is intended for beginners and experienced users who want reliable results from a 360 action camera.

DJI Osmo 360 Specifications and Key Features

Camera type: Dual-lens 360-degree action camera with single-lens recording mode.
Sensors: Two 1/1.1-inch square CMOS sensors.
360 video: 8K panoramic video at 24, 25, 30, 48, or 50 frames per second.
6K video: 6000 × 3000 resolution at up to 60 frames per second.
4K panoramic video: Up to 100 frames per second for slow-motion playback.
Single-lens mode: Up to 5K/60fps flat video with an approximately 155-degree ultra-wide view.
Panoramic photos: Up to 120 megapixels at 15520 × 7760 resolution.
Single-lens photos: Up to 30.72 megapixels at 6400 × 4800 resolution.
Aperture: f/1.9 for improved light capture.
Dynamic range: Up to 13.5 stops under supported recording conditions.
Storage: 128GB built-in storage, with approximately 105GB available, plus expandable microSD storage.
Connectivity: Wi-Fi 6 and USB 3.1.
Dimensions and weight: Approximately 61 × 36.3 × 81 mm and 183 g.
Battery performance: Up to 100 minutes of 8K/30fps panoramic recording, with longer runtime available in Endurance mode under specified conditions.
Water resistance: The camera body can be used to depths of up to 10 meters underwater when the required conditions and precautions are followed.

How to Set Up the DJI Osmo 360 Action Camera

Initial setup steps

Inspect the camera, lenses, battery compartment, and USB-C port. Remove protective films and confirm that the lens surfaces are clean.
Charge the camera with a compatible USB-C power adapter. Allow the battery to charge sufficiently before recording long sessions.
Press and hold the power button to start the camera. Select the language, region, date, time, and preferred measurement units.
Open the storage settings and format a compatible microSD card if one is installed. Back up important files before formatting.
Install the DJI Mimo app on a compatible mobile device. Enable Bluetooth and Wi-Fi, then follow the in-app pairing instructions.
Check for firmware updates before the first recording session. Keep the camera and mobile device close together during installation.
Select 360 mode for reframable footage or single-lens mode for conventional wide-angle video. Choose resolution, frame rate, stabilization, and exposure settings.
Record a short test clip, play it back, and confirm that audio, image alignment, storage, and exposure are working correctly.

Keep both lenses free from fingerprints and avoid touching them with abrasive materials. Do not open covers or connect accessories while the camera is wet. Before underwater use, inspect seals and follow the applicable waterproofing instructions. Stop recording if the camera becomes unusually hot, displays a warning, or shows signs of physical damage.

DJI Osmo 360 Troubleshooting Guide

Camera will not turn on

Charge the battery with a suitable USB-C charger, then hold the power button for several seconds. If the camera remains unresponsive, disconnect accessories, allow it to cool, and try again. Persistent failure requires DJI support inspection.

Recording stops unexpectedly

Check available storage, battery level, and camera temperature. High-resolution 8K recording creates substantial heat and file sizes. Use a supported microSD card, reduce resolution when appropriate, and avoid leaving the camera in direct sunlight.

Files are missing or cannot be saved

Confirm that the selected storage location has free space. Back up recordings before formatting the card. If a card repeatedly produces errors, replace it with a compatible, properly rated card rather than continuing to record on unreliable media.

DJI Mimo cannot connect

Turn on Bluetooth and Wi-Fi, keep the phone near the camera, and close other camera applications. Restart both devices and repeat pairing. Update the camera firmware and DJI Mimo app if connection problems continue.

Stitching lines or soft areas appear

Clean both lenses, check that the lens protectors are correctly installed, and avoid placing close subjects directly across the stitching area. Uneven lighting and objects very near the camera can also make seams more visible.

Error messages and support

Record the complete message, firmware version, camera serial number, and conditions under which the issue occurred. Use DJI’s official Osmo 360 support, downloads, user-manual, and service channels for current firmware, diagnostic instructions, warranty terms, and repair assistance.

DJI Osmo 360 Pros and Cons

Advantages

Native 8K 360 recording: Captures a highly detailed panoramic frame and provides flexibility to reframe footage after recording.
Large square sensors: The sensor design supports strong vertical resolution and broad panoramic coverage compared with many conventional compact 360 cameras.
Versatile shooting modes: Users can switch between immersive 360 video and familiar single-lens action-camera footage.
Useful built-in storage: Approximately 105GB of available internal capacity can help when a spare memory card is not immediately available.
Compact design: The 183 g body is practical for helmets, handheld grips, travel mounts, and extended outdoor use.
Fast transfers: Wi-Fi 6 and USB 3.1 can simplify movement of large high-resolution files.

Limitations

Large files: Native 8K footage requires substantial storage, fast transfers, and a capable editing device.
Lens exposure: The two protruding lenses are more vulnerable to scratches and fingerprints than a typical flat action-camera lens.
Heat and battery demands: Maximum-resolution recording can increase temperature and reduce practical runtime in demanding environments.
Editing requirements: Reframing 360 footage takes additional software steps compared with recording standard flat video.
Best for specific users: It suits travelers, athletes, motorcyclists, and creators who need reframing flexibility. Users who only want simple point-and-shoot flat video may prefer a conventional action camera.

PDF

Faqs

How do I set up the dji Osmo 360 Action Camera for the first time?

Charge the camera, insert a compatible microSD card if needed, and hold the quick switch button to power it on. Install the DJI Mimo app, then enable Bluetooth and Wi-Fi on your phone. Open DJI Mimo, select the camera icon, and connect to the dji Osmo 360 Action Camera. Follow the activation prompts and install any available firmware update before recording important footage.

What should I do if the dji Osmo 360 Action Camera will not connect to DJI Mimo?

Confirm that both Bluetooth and Wi-Fi are enabled, then keep the phone close to the dji Osmo 360 Action Camera. Close and reopen DJI Mimo, disable any VPN, and remove the camera from the phone’s remembered Bluetooth devices before trying again. Restart both devices if the connection still fails. Updating DJI Mimo and the camera firmware can also resolve pairing and live-view problems.

Which memory card is compatible with the dji Osmo 360 Action Camera?

The dji Osmo 360 Action Camera includes built-in storage and supports storage expansion with a microSD card. For high-resolution 8K video, use a reputable UHS-I microSDXC card with U3 and V30 performance or better, and format it in the camera before recording. Avoid nearly full, damaged, or unusually slow cards because they can cause recording interruptions, file errors, or delayed saving.

How can I transfer dji Osmo 360 Action Camera videos to a phone or computer?

You can transfer footage through DJI Mimo, a microSD card reader, or a USB-C connection. DJI Mimo is convenient for selecting clips on a phone, while a card reader is often faster for large 8K files. For USB transfer, swipe down on the camera screen, open Settings, choose USB Mode, and connect the camera to a compatible computer or phone with a data-capable USB-C cable.

How do 360 mode and single-lens mode differ on the dji Osmo 360 Action Camera?

360 mode records the scene in all directions, allowing you to reframe the viewpoint later during editing. Single-lens mode works more like a conventional action camera and is useful when you want a straightforward forward-facing clip. The dji Osmo 360 Action Camera also supports wide-angle action recording, so choose single-lens mode for simpler file handling and 360 mode when flexible framing is more important.

How can I improve dji Osmo 360 Action Camera battery life during long recordings?

Use a lower resolution or frame rate when 8K detail is unnecessary, and enable Endurance mode for extended recording when available. Turn off wireless features after setup, reduce screen use, and carry a fully charged spare battery or suitable power source. Keep ventilation areas clear, because excessive heat can reduce recording time. For long 8K sessions, monitor storage space and temperature regularly.

Why are dji Osmo 360 Action Camera 360 videos blurry or poorly stitched?

Clean both lenses with a soft microfiber cloth and check for fingerprints, moisture, or protective-film residue. Keep nearby subjects away from the exact stitching area when possible, and avoid blocking either lens with fingers, mounts, or accessories. Use adequate lighting and hold the camera level during capture. If stitching remains incorrect, update firmware, restart the camera, and test without third-party accessories.

How should I clean and maintain the dji Osmo 360 Action Camera?

After outdoor use, remove dust and grit before wiping the body or lenses. Use a clean, dry microfiber cloth for the lens surfaces and avoid abrasive materials, solvents, or spraying liquid directly onto the camera. Dry the camera completely before storing it, especially after humid or wet conditions. Remove the battery for extended storage, keep the camera in a cool, dry place, and inspect lens covers and ports before every shoot.