Dji Power 1000 Mini Power Station DYM1000M User Manual

Content

DJI Power 1000 Mini Power Station DYM1000M Manual

The DJI Power 1000 Mini Power Station DYM1000M is a compact portable power station designed to provide dependable electricity for travel, outdoor activities, mobile work, photography, and emergency backup. Its 1008 Wh lithium ferrophosphate battery combines useful capacity with long-term durability, retaining more than 80% of its capacity after up to 4,000 cycles under specified conditions.

With a rated AC output of up to 1,000 W and continuous output of up to 800 W, the unit can operate common electronics such as laptops, monitors, camera chargers, networking equipment, lights, and small appliances. USB-C charging supports up to 100 W on the dedicated port, while the retractable USB-C cable provides a convenient way to charge compatible devices without carrying an additional cable.

The DJI Power 1000 Mini is suited to campers, photographers, content creators, remote workers, travelers, and households seeking short-duration backup power. Its SDC output can support compatible DJI Power accessories and other suitable equipment, while the portable enclosure makes it easier to transport than many larger 1 kWh power stations.

Before use, confirm the outlet standard and electrical limits for the country or region where the power station will operate. The product is not a replacement for a permanently installed home backup system, and high-wattage heating appliances may exceed its continuous output capability.

DJI Power 1000 Mini Specifications and Features

Model: DYM1000M
Battery chemistry: Lithium ferrophosphate, commonly called LFP
Typical energy capacity: 1008 Wh
Battery durability: More than 80% capacity after up to 4,000 cycles under specified test conditions
Weight: Approximately 11.5 kg
Dimensions: 314 × 212 × 216 mm
AC output: Up to 1,000 W, with continuous output up to 800 W; regional voltage and outlet configurations vary
USB-C output: Up to 100 W per channel with supported voltage profiles from 5 V to 20 V
USB-C retractable cable: Up to 100 W; combined output with the USB-C port is up to 150 W, subject to the specified power-sharing limits
USB-A output: 5 V, 2.4 A, up to 12 W per channel
SDC output: 9–28 V, up to 300 W
Ports: AC outputs, one USB-C port, one retractable USB-C cable, two USB-A ports, one SDC output, and one AC input; the AC outlet count depends on regional configuration
Maximum operating altitude: 5,000 m

How to Set Up the DJI Power 1000 Mini Power Station

Place the power station on a dry, stable, and ventilated surface. Keep the air inlets and outlets clear.
Inspect the AC cable, ports, and housing for damage before connecting the unit.
Connect the supplied AC charging cable to the AC input and a compatible wall outlet. Allow the battery to charge before connecting demanding equipment.
Press the power button to activate the display and check the battery percentage, input power, output power, and warnings.
To power AC equipment, connect the device to an AC outlet and enable the AC output function. Do not exceed the regional continuous power rating.
For mobile devices, connect USB-A, USB-C, or the retractable USB-C cable. Use a cable and device that support the desired charging rate.
For compatible accessories, connect the equipment to the SDC output and verify its voltage and current requirements first.
Install the official DJI Power application only if supported for this model and region, then follow the in-app pairing instructions for available monitoring or firmware features.

If charging does not begin, reseat the AC cable, try a known-good outlet, and check the display for a temperature or overload warning. Do not operate the power station in rain, near standing water, or in an enclosed space. Disconnect loads before moving the unit, and never open or modify the battery enclosure.

DJI Power 1000 Mini Troubleshooting Guide

Power station will not turn on

Press and hold the power button as described in the user manual. If the display remains blank, connect the AC charger and allow the unit to recover. Check for visible damage, extreme temperatures, or a completely depleted battery.

AC output is unavailable

Confirm that AC output is enabled and that the connected appliance does not exceed the continuous rating. Motors, compressors, heaters, and other equipment may require a brief startup surge. Disconnect all loads, restart the output, and reconnect devices one at a time.

USB device charges slowly

Verify that the device supports USB-C Power Delivery or another compatible charging standard. Use the dedicated USB-C port or retractable cable for higher-power devices, and remember that simultaneous charging can reduce the available output on individual ports.

Charging stops or shows a warning

Move the power station to a cooler, dry, ventilated location and allow it to return to a normal operating temperature. Remove excessive loads and inspect all cables. Do not attempt to bypass a displayed protection warning.

Error codes and support

Exact warning codes and corrective actions can vary by firmware and region. Record the code shown on the display, disconnect accessories, and consult the official DJI Power 1000 Mini user manual or DJI Support documentation. For service, use the DJI Support website and provide the model number DYM1000M, serial number, purchase documentation, firmware version, and a description of the conditions that caused the issue. Warranty eligibility and service procedures depend on the applicable region and product terms.

DJI Power 1000 Mini Pros and Cons

Advantages

Long-life LFP battery: The lithium ferrophosphate chemistry and specified cycle performance make it suitable for frequent use.
Useful 1 kWh-class capacity: The 1008 Wh battery can support several smaller devices or provide short-duration backup for essential electronics.
Portable design: At approximately 11.5 kg, it is easier to transport than many higher-capacity power stations.
Strong USB-C capability: Up to 100 W supports compatible laptops, tablets, cameras, and other USB-C equipment.
Flexible connections: AC, USB-A, USB-C, retractable USB-C, and SDC outputs cover a broad range of modern electronics.

Limitations

Limited continuous AC power: Appliances above 800 W may exceed the recommended continuous output, even though the unit can reach a higher maximum rating in specified conditions.
Regional outlet differences: AC port count, voltage, and bypass specifications depend on the market version.
Not a whole-home backup system: The unit is better suited to portable, workstation, camping, and essential-device use than prolonged operation of large household appliances.
Charging requirements vary: Actual charging time and output depend on the input source, temperature, battery state, connected loads, and regional configuration.

The DJI Power 1000 Mini Power Station DYM1000M is a strong choice for users who prioritize a durable 1 kWh-class battery, portable design, and high-power USB-C charging. Users who need to run large heaters, induction cookers, refrigerators for extended periods, or multiple high-wattage appliances should consider a larger power station with a higher continuous AC rating.

PDF

Faqs

How do I set up the dji Power 1000 Mini Power Station DYM1000M for the first time?

Place the dji Power 1000 Mini Power Station DYM1000M on a dry, ventilated, stable surface. Connect the AC charging cable, switch on the power station, and allow it to charge before connecting important equipment. Install the DJI Home app to check firmware, configure charging settings, and review operating information. After charging, press the power button, then activate the required AC, USB, or DC output before connecting compatible devices.

Why is the dji Power 1000 Mini Power Station DYM1000M not supplying power to my device?

First, confirm that the power station is switched on and that the correct output button has been enabled. Check the display for low battery, overload, overheating, or another warning. Disconnect the device, wait briefly, and reconnect it after confirming its power requirement is within the selected output’s rating. If AC output switches off after inactivity, press the AC button again or hold it to prevent automatic shutdown while using compatible equipment.

Can the dji Power 1000 Mini Power Station DYM1000M work as a UPS during a power outage?

Yes, the dji Power 1000 Mini Power Station DYM1000M can provide UPS functionality when compatible equipment is connected to its AC output while the station is receiving grid power. Turn on the power station, connect the equipment and AC input, then press the AC button and confirm that the AC indicator is solid. Test the arrangement with noncritical equipment first, because some devices may require a particular power waveform or switching behavior.

How can I recharge the dji Power 1000 Mini Power Station DYM1000M away from a wall outlet?

The dji Power 1000 Mini Power Station DYM1000M supports several charging methods, depending on the accessories and regional configuration. You can use a compatible DJI solar charging cable and panels through the SDC port, a suitable vehicle charging cable, or a compatible USB-C charger. Check cable polarity, connector compatibility, and charging limits before connecting. The DJI Home app can also be used to adjust certain AC and vehicle charging input settings.

How do I use the USB-C ports and retractable cable on the dji Power 1000 Mini Power Station DYM1000M?

Use the USB-C port or built-in USB-C retractable cable for compatible phones, tablets, laptops, cameras, and other USB-C equipment. Pull out the retractable cable carefully, connect the device, and confirm charging on the display. The USB-C port supports up to 100 W, while simultaneous use of both USB-C charging connections shares available output. Use a cable and charger standard suitable for the device, especially when charging laptops.

Why does the AC output on the dji Power 1000 Mini Power Station DYM1000M turn off automatically?

The dji Power 1000 Mini Power Station DYM1000M may automatically disable AC output when it detects that no device has been charging through the AC outlets for about 30 minutes. This energy-saving behavior is normal. To restore power, press the AC button after reconnecting the device. If continuous AC output is needed, press and hold the AC button until its indicator becomes solid, while still following safe operating practices.

What should I do when an error code appears on the dji Power 1000 Mini Power Station DYM1000M?

Stop using the affected output and disconnect connected equipment if an error code appears on the dji Power 1000 Mini Power Station DYM1000M. Note the code, check whether the unit is hot, overloaded, wet, or connected to an unsuitable charger, and allow it to cool if necessary. Use the DJI Home app to view the reported issue and recommended solution. Do not open the housing; contact DJI support if the warning remains.

How should I maintain and store the dji Power 1000 Mini Power Station DYM1000M?

Keep the dji Power 1000 Mini Power Station DYM1000M clean, dry, and away from direct heat, moisture, dust, and blocked ventilation. Inspect cables and ports for damage before use, and never operate the unit if its casing is swollen, cracked, or unusually hot. For storage, disconnect accessories and keep the battery in a cool, dry location. Periodically check its charge level and follow DJI guidance for long-term battery storage.