Ego ST1620T Power String Trimmer User Manual

Content

EGO ST1620T Power String Trimmer Manual

The EGO ST1620T Power String Trimmer is a 56-volt cordless grass trimmer designed for efficient lawn edging, weed control, and light vegetation clearing. Its brushless motor, carbon-fiber shaft, 16-inch cutting width, and automatic line-management technology provide a practical combination of power, reach, and reduced maintenance.

This battery-powered string trimmer uses EGO ARC Lithium 56V batteries, allowing the same battery platform to support compatible EGO outdoor tools. The POWERLOAD head simplifies line replacement by winding the line internally, while LINE IQ technology automatically monitors and advances the cutting line to help maintain a consistent cutting width.

The EGO ST1620T Power String Trimmer suits homeowners maintaining medium- to large-sized lawns, gardeners trimming around fences and flower beds, and users who prefer cordless operation without gasoline, fuel mixing, or engine exhaust. Its variable-speed control helps match performance to the task: use a lower setting for delicate grass and longer runtime, or increase speed for dense weeds and heavier growth.

Before operation, read the complete operator’s manual, install the correct battery, and wear eye and hearing protection, long trousers, sturdy footwear, and gloves. Keep people, pets, stones, and other objects away from the cutting area. The tool is supplied as a bare tool in applicable packages, so a compatible battery and charger may need to be purchased separately.

EGO ST1620T Specifications and Features

Model: EGO ST1620T cordless string trimmer.
Power system: 56V lithium-ion battery platform.
Battery compatibility: Compatible with EGO ARC Lithium 56V batteries.
Motor: High-efficiency brushless motor.
Cutting width: 16 inches, or approximately 40.6 centimeters.
Cutting line: 0.095-inch twisted nylon line.
Trimmer head: POWERLOAD head for simplified line installation.
Line management: LINE IQ technology automatically detects and advances line as needed.
Motor speed: Approximately 3,500 to 5,500 revolutions per minute, depending on operating mode and load.
Shaft: Carbon-fiber shaft designed to reduce weight while providing rigidity.
Controls: Variable-speed trigger with selectable operating-speed control.
Weight: Approximately 7.7 pounds, or 3.5 kilograms, including the guard and excluding the battery.
Battery and charger: Not included with bare-tool configurations.

How to Set Up the EGO ST1620T Power String Trimmer

Remove the trimmer, guard, auxiliary handle, and hardware from the packaging. Check every component for shipping damage.
Attach the guard according to the operator’s manual. Tighten all fasteners securely, and never operate the tool without the guard installed.
Install and adjust the auxiliary handle so the trimmer feels balanced and the cutting head remains easy to control.
Inspect the POWERLOAD head and confirm that the correct 0.095-inch line is installed. Do not substitute line that is too thick, too thin, or made from an unapproved material.
Charge a compatible EGO 56V battery using the appropriate EGO charger. Keep the battery dry and inspect it for damage before use.
With the trigger released, slide the battery into the battery compartment until it clicks into place.
Hold the trimmer with both hands, keep the cutting head away from your body, and press the safety control before squeezing the variable-speed trigger.

There is no Bluetooth pairing or wireless configuration required. If the motor does not start, remove and reinstall the battery, verify that it is charged, and check that the safety control and trigger are being operated correctly. Remove the battery before assembling, adjusting, clearing line, or inspecting the cutting head.

EGO ST1620T Troubleshooting Guide

Motor does not start: Confirm that the battery is fully seated and charged. Remove the battery, inspect the contacts, and reinstall it. Allow an overheated tool or battery to cool before trying again.
Tool stops during use: Reduce the cutting load, clear grass wrapped around the head, and check for blocked ventilation openings. Avoid forcing the head through thick vegetation.
Line does not advance: Stop the motor, remove the battery, and inspect the spool for tangled or incorrectly installed line. Reload the specified line through the POWERLOAD head as described in the manual.
Line breaks repeatedly: Avoid contact with concrete, edging stones, wire, and fencing. Use the recommended line diameter and operate the head at a suitable height.
Excessive vibration: Remove the battery and inspect the head, spool, guard, and shaft for damage or debris. Do not use the trimmer if a component is cracked, bent, or loose.
Short runtime: Use a lower speed when practical, keep the cutting area clear, and charge the battery fully. Cold temperatures, dense vegetation, and an aging battery can reduce runtime.

The ST1620T operator’s manual does not provide a broad user-facing numerical error-code table; diagnostic indicators may vary by battery or charger. Do not bypass safety features. For unresolved problems, contact EGO customer service at 1-855-346-5656. Warranty requests generally require proof of purchase and must follow the applicable warranty terms. EGO provides support resources and warranty information through its official owner-support channels.

EGO ST1620T Pros and Cons

Advantages

Strong cordless performance: The 56V platform and brushless motor provide more capability than many entry-level battery trimmers.
Large cutting path: The 16-inch width helps cover open lawn areas efficiently while trimming.
Automatic line management: LINE IQ can reduce interruptions caused by manually bumping or pulling line.
Simple line loading: POWERLOAD technology makes spool installation easier than conventional manual winding systems.
Lower routine maintenance: The brushless electric design eliminates spark plugs, fuel mixing, carburetor service, and engine oil.
Flexible battery ecosystem: Existing EGO 56V battery owners can use compatible packs across supported tools.

Limitations

Battery-dependent operation: Bare-tool packages require a compatible battery and charger.
Recharge time: Extended jobs may require a second charged battery or planned charging breaks.
Not intended for heavy brush cutting: Dense woody stems and large weeds may require a brush cutter or dedicated clearing tool.
Higher system weight with battery: The battery adds weight compared with the listed bare-tool weight.
Best suited to: Homeowners and property caretakers who want quiet, low-maintenance trimming with a wide cutting path.
Consider another tool if: You need all-day commercial clearing, extended unattended runtime, or a blade-equipped machine for thick woody growth.

PDF

Faqs

How do I set up the EGO ST1620T Power String Trimmer for the first time?

Before setup, remove the battery and inspect the guard, cutting head, shaft, handle, and trigger for damage. Secure the guard and auxiliary handle according to the operator’s manual, then adjust the telescoping shaft so you can work comfortably without leaning forward. Install a fully charged compatible EGO 56V battery only after assembly is complete. Check that the 16-inch cutting area is clear, wear eye and hearing protection, and test the variable-speed trigger briefly in an open area.

What battery and charger are compatible with the EGO ST1620T Power String Trimmer?

The EGO ST1620T Power String Trimmer is designed for EGO POWER+ 56V lithium-ion battery packs and the corresponding EGO 56V charger system. Do not use batteries from other brands, damaged packs, or adapters that are not approved for the tool. Make sure the battery is fully seated until it clicks into place. If the trimmer will not start, remove and reinstall the battery, check its charge level, and inspect the contacts for dirt or moisture.

Why is my EGO ST1620T Power String Trimmer not starting?

First, remove the battery and check that the cutting head is free of wrapped grass, wire, or debris. Reinstall a charged EGO 56V battery firmly, then press the safety lock-off before squeezing the variable-speed trigger. A hot battery or motor can activate protection, so allow the tool to cool before trying again. If the problem continues, examine the battery terminals, trigger area, and power indicator for damage, and stop using the trimmer if any component appears unsafe.

How does the LINE-IQ automatic line feed work on the EGO ST1620T?

The EGO ST1620T uses LINE-IQ technology to sense when additional cutting line is needed and feed it automatically, eliminating routine bumping of the head. Keep the trimmer head moving normally rather than repeatedly tapping it on the ground. If line feeding becomes uneven, stop the tool, remove the battery, and inspect the head for tangled line, packed grass, or incorrect loading. Avoid pulling the line forcefully while the system is operating.

How do I replace the cutting line in the EGO ST1620T Power String Trimmer?

Remove the battery before replacing the line. Use only 0.095-inch, or 2.4 mm, nylon twist line intended for the EGO ST1620T. Feed approximately 14 feet of line through the eyelet until both sides are even, reinstall the battery, and press the POWERLOAD button to wind the line. Release the button when the line reaches the recommended length on each side. Never use wire, rope, metal-reinforced line, or heavier line.

Why does the EGO ST1620T lose power or stop while trimming?

Reduced performance commonly results from thick vegetation, overloading, a low battery, or grass wrapped around the cutting head. Release the trigger, remove the battery, and clear the head before continuing. Use a slower, sweeping motion and avoid forcing the line into dense growth. Keep the line at the recommended diameter and maintain adequate airflow around the motor housing. If the tool stops repeatedly after cooling and using a charged battery, have the trimmer inspected.

How can I improve cutting performance and battery runtime with the EGO ST1620T?

Use the lowest trigger speed that handles the vegetation effectively instead of running continuously at maximum speed. Trim with the line’s outer section, keep the head parallel to the ground, and make controlled side-to-side passes. Avoid cutting wet, tangled, or unusually thick growth in one pass. Keep the cutting head clean, use the specified 0.095-inch nylon line, and maintain a sharp, unobstructed guard area. These habits reduce motor load and improve battery efficiency.

What maintenance and storage steps does the EGO ST1620T Power String Trimmer need?

After each use, remove the battery and brush grass or dirt from the guard, shaft, vents, and cutting head. Check the line, spool, fasteners, and guard for wear or damage, and replace damaged parts before the next job. Do not spray the trimmer with water or use solvents on plastic components. Store the tool with the battery removed in a dry, protected location. Keep batteries within their recommended temperature range and follow the charger’s storage guidance.