How to Use: Evocharge EvoCharge EVSE iEVSE iEVSE Plus Charging Station User Manual

evocharge EvoCharge EVSE iEVSE iEVSE Plus Charging Station Manual

The evocharge EvoCharge EVSE iEVSE iEVSE Plus Charging Station is a Level 2 AC EV charging solution designed for homes, workplaces, fleets, and commercial parking areas. It supports everyday charging for battery electric vehicles and plug-in hybrid electric vehicles using a standard SAE J1772 connector, making it broadly compatible with EVs sold in the United States and Canada. EvoCharge positions the product line around flexible power levels, network connectivity, and durable installation options, which makes it useful for drivers who want a dependable charger that can scale from basic residential use to managed multi-station deployments.

One of the main benefits of the iEVSE and iEVSE Plus models is connectivity. The standard iEVSE supports Wi-Fi-based smart charging management, while the iEVSE Plus adds Wi-Fi and LTE options for stronger remote management in locations where Wi-Fi is weak or unavailable. The family also includes configurable amperage settings, with common models offering 32A or 40A output depending on the version and installation. This makes the evocharge EvoCharge EVSE iEVSE iEVSE Plus Charging Station attractive for users who want charging control, network access, and professional-grade reliability in one package.

Typical use cases include overnight home charging, employee charging at offices, public-facing parking installations, and fleet depots that need networked energy management. Estimated pricing generally falls in the mid-range of the Level 2 market, with basic EVSE units typically lower and iEVSE Plus network-ready models costing more due to smart features and LTE support. Availability is usually through EvoCharge, distributors, and EV charging resellers.

Specifications for EvoCharge iEVSE Plus Level 2 Charging Station

• Charging level: Level 2 AC charging
• Connector: SAE J1772
• Power output: Common configurations include 32A and 40A models
• Voltage: 208–240VAC
• Frequency: 50/60 Hz
• Connectivity: Wi-Fi on iEVSE and iEVSE Plus; LTE available on iEVSE Plus
• Cable length options: 18 ft and 25 ft variants are available across the product family
• Use environment: Indoor and outdoor-rated commercial and residential installations
• Vehicle compatibility: EVs and PHEVs with J1772 charging in North America
• Performance benchmark: Up to 7.2 kW on 30A-class units and up to 7.68 kW on 32A default configurations, depending on model and circuit rating

Compared with simpler non-networked Level 2 chargers, the iEVSE and iEVSE Plus stand out for remote monitoring and smart access control. Compared with many basic wall-mounted chargers, EvoCharge offers more commercial-grade management options, while remaining easier to deploy than full DC fast charging equipment. The iEVSE Plus is the best fit when you need networked control, flexible connectivity, and more robust fleet or workplace visibility.

How to set up the EvoCharge EVSE iEVSE iEVSE Plus charging station

Start by confirming that the electrical circuit matches the charger’s required amperage and voltage. Before installation, verify whether the unit is intended for a 30A, 32A, or 40A configuration, and ensure the breaker and wiring are sized accordingly. For hardwired installations, mount the station securely on a flat wall surface and follow the supplied installation guide for conduit, wiring, and grounding requirements.

After mounting, connect power and complete any configuration steps required for the model you purchased. Smart models may require setup in the EvoCharge mobile or web-based management platform, where you can assign the charger, configure network settings, and enable access control. If your installation uses Wi-Fi, place the unit where the signal is stable. If you are using iEVSE Plus with LTE, confirm cellular activation during commissioning.

To begin charging, insert the J1772 connector fully into the vehicle until it locks. To stop charging, press the connector release and unplug it. If the charger does not start, check the breaker, confirm the connector is fully seated, and inspect the indicator lights. Always de-energize the circuit before opening the enclosure, and never install the unit in wet conditions without proper electrical protections in place.

Troubleshooting EvoCharge EV charger problems and error lights

If the charger does not power on, check the upstream breaker, verify that supply voltage is present, and make sure the unit has been installed on the correct circuit. If the vehicle does not begin charging, reconnect the plug firmly and confirm that the vehicle itself is ready to accept a charge. Communication failures are often caused by a loose connector, a vehicle-side charging fault, or an interrupted network connection on smart models.

For fault conditions, the manuals indicate that cycling power can reset the unit after the charging connector has been removed. If fault indicator lights remain active, shut off the toggle or breaker, wait briefly, then restore power. For network problems, check Wi-Fi signal strength or LTE service status and re-pair the charger in the management app if needed. Because indicator-light patterns vary by model, use the product’s light guide when diagnosing status messages.

Preventive maintenance includes keeping the connector clean, storing the cable properly, checking mounting hardware periodically, and confirming that ventilation around the unit is unobstructed. Warranty and support are handled through EvoCharge and Phillips & Temro channels. For assistance, customers commonly use EvoCharge support at 888-653-0160 or sales support at 800-930-9450, depending on the issue and region.

Pros and cons of the EvoCharge iEVSE Plus home and commercial EV charger

Pros

• Smart connectivity: Wi-Fi and LTE options make remote management practical for workplaces and fleet sites.
• Broad compatibility: Works with most North American EVs and PHEVs using J1772.
• Flexible deployment: Suitable for homes, apartments, offices, and commercial lots.
• Configurable power: Multiple amperage and cable-length options help match installation needs.
• Professional-grade design: Better suited to managed charging than many entry-level home chargers.

Cons

• Higher cost: Smart and LTE models typically cost more than basic plug-in chargers.
• Installation complexity: Hardwired installation may require a licensed electrician.
• Feature overlap: Some home users may not need fleet-level connectivity or network controls.
• Best value depends on use case: For simple overnight charging, a less expensive Level 2 EVSE may be enough.

For buyers comparing alternatives, the EvoCharge iEVSE Plus is strongest when smart charging, multi-user control, or network management matters more than lowest upfront cost.

Customer reviews for EvoCharge EVSE iEVSE iEVSE Plus Charging Station

Customer feedback for the EvoCharge charger line is generally positive, especially among users who want a reliable Level 2 charger with management features. Typical praise centers on strong build quality, dependable daily charging, and the convenience of app or network-based control. Many commercial users rate the product highly for workplace and fleet applications, often describing it as a practical 4.5-star to 5-star solution for managed charging.

Common complaints usually involve installation cost, the need for professional wiring, and occasional network setup issues on smart models. Some users prefer simpler plug-in chargers if they only need basic home charging. A representative buyer testimonial style comment would be: “Fast, solid, and easy to use once installed.” Another common view is: “Great for our office parking lot, but the LTE model is more than a casual home user needs.” For most buyers, the recommendation is clear: choose iEVSE Plus if remote management and connectivity matter, and choose a standard EVSE if you only need straightforward charging.