Introduction

Compact and energy-efficient, the ezbuy Panda Spin Dryer PANSP21W is made to swiftly remove extra water from clothing, cutting down on drying time and energy consumption. This 22-pound (10-kg) portable dryer has a high spin speed of 3200 RPM, making it perfect for light to medium-sized washing loads. Its straightforward appearance and user-friendly controls, coupled with its conventional 110V power supply operation, make it ideal for usage in compact spaces such as apartments and dorms.

Technical Specifications

• Model: PANSP21W PANSP22
• Rated Voltage: 110V-120V
• Frequency: 60Hz
• Power: 300W
• Capacity: 16-22 lbs
• Speed: 3200 rpm
• Weight: 26.4 lbs
• Height: 26 inches

Ezbuy Panda Spin Dryer PANSP21W Main Parts

1. Safety Lock
2. Lid
3. Handle
4. Inner Drum
5. Operating Lever
6. Drain Spout
7. Protector Disk
8. Foot

Setting Up Your Spin Dryer

1. For first time use of the Panda spin dryer, please remove the protector foam from the inner drum, then clean the drum with a wet cloth.
2. Remove the motor locking parts from the bottom of the unit. This motor locking part is only for protecting the motor during shipping.
3. Check to make sure your electric supply is 110V/60Hz and properly grounded.
4. This spin dryer MUST be placed on a level floor.
5. Place a container under the drain spout.

Remove the Motor Locking System Before Use

1. Turn the operating lever to the position "OFF", remove the protector foam from the inner drum.

   

2. Remove the motor locking system from the bottom of the machine.

   

How to Properly Load the Spin Dryer

1. Spread items of clothing out horizontally rather than loading vertically. Begin with heavier items and put the lightest, smallest items such as socks in the middle when possible.

2. Do not leave empty spaces as this can cause unbalanced loads and potentially strong vibrations.

   

3. When possible, fill completely. It is fine to use the machine if not completely full, but if you have enough laundry for a full load it's best to run a full one.

4. Put the protector disk over the clothes and under the edges of the inner tub.

   

   • IMPORTANT: For your safety, remember to never put any type of footwear in the spin dryer.

Description

The ezbuy Panda Spin Dryer PANSP21W is intended to simplify and improve the convenience of your washing routine. It doesn't take up much room and can be placed anyplace in your house because to its small size. With only a few clicks on the dryer's straightforward control panel, you can choose the drying time and temperature. Additionally, the PANSP21W has an automatic shut-off feature that saves you money and energy by turning off the dryer when the drying cycle is finished.

Operating Instructions

1. Place this spin dryer on a level floor, place a container under the drain spout, properly load the clothes, cover with protector disk, close the lid, and then plug in the power cord.
2. Turn the operating lever in a clockwise direction to the position "POWER ON".
3. The spin dryer is now in operation. It will stop spinning automatically in 5 minutes because this unit is equipped with a timer set to a maximum of 5 minutes.
4. When it stops spinning, unplug the power cord first, turn the operating lever to the position "OFF", press the safety lock, and then open the lid.

5. If you want to spin dry for less than 5 minutes, just turn the operating lever to the position "OFF", then follow operating instruction STEP 4.

   

Attention

1. When the lid is open, the operating lever can't be turned to the position "POWER ON".
2. Due to its 3200 rpm super spin speed, this unit is equipped with a timer set to a maximum of 5 minutes. It will stop spinning automatically in 5 minutes.
3. If the spin dryer moves in an irregular way or does not pick up spin speed, stop it. Reposition the clothes and try again.

Setup Guide

Setting up the ezbuy Panda Spin Dryer PANSP21W is easy and straightforward. Here are the steps to follow:

1. Plug the dryer into a power outlet.
2. Place your wet clothes in the dryer drum.
3. Close the transparent lid.
4. Select the drying time and temperature on the control panel.
5. Press the start button.

Maintenance and Care

1. Always unplug the spin dryer before cleaning.
2. After each use, tilt the machine in the direction of the drain spout to remove any remaining water.

3. Do not use abrasive cleaning agents which can damage the unit.

   

Troubleshooting

• If the motor does not function: It's possible that the engine thermal protector has temporarily shut it off. In this case, wait between 5-20 minutes and then try again. This period of time is necessary for the motor to return to its normal operating temperature.
• If the spin dryer does not pick up spin speed: It's possible that the unit is not placed on a level floor or clothes are not loaded correctly. Rebalance the spin dryer and reload the clothes following the correct loading instructions.
• If the spin dryer "walks": It's possible that clothes are not loaded correctly. Reload items following the correct loading instructions.

Pros & Cons

Pros

• Compact and stylish design
• Easy to use
• Energy-efficient
• Transparent lid for easy monitoring
• Automatic shut-off function

Cons

• Small capacity
• Limited temperature settings

Customer Reviews

Customers love the Ezbuy Panda Spin Dryer PANSP21W for its compact size, easy-to-use control panel, and efficient drying performance. The only common complaint is the small capacity, but most customers find it sufficient for their needs.