Ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 User Manual

Content

Ghost Controls Ghost Pro Series Dual Gate Opener Kit LDM2 Manual

Introduction

The ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 is an automatic gate operator system designed for residential properties with two swinging gate leaves. It provides powered entry and exit control while helping homeowners improve convenience, privacy, and property access.

The system uses a 12-volt DC operating platform and requires a compatible 12-volt automotive or deep-cycle marine battery. Its dual-arm arrangement allows one control system to operate both gate leaves, making it suitable for driveway gates, farm entrances, estate gates, and other single-family residential applications.

The kit is intended for users who want automated gate access without routing conventional household-voltage wiring directly to the gate operator. Depending on the installation, the system can be configured with AC battery charging or a solar charging arrangement. Remote controls and compatible accessories can provide convenient wireless operation, while safety controls help reduce the risk of unintended movement.

This guide explains the product’s operating requirements, installation sequence, everyday care, basic troubleshooting, and safety practices. Always use the installation and owner’s manual supplied with the exact kit for mounting dimensions, wiring diagrams, gate-specific limits, and accessory compatibility.

Specifications and Key Features

Product type: Dual-swing residential gate opener kit.
Series: Ghost Pro Series.
Model: LDM2.
Operating voltage: 12 VDC.
Power requirement: A 12-volt automotive or deep-cycle marine battery is required and is not included with the operator kit.
Gate configuration: Two gate leaves operated by two motor arms.
Charging options: The system may be configured for AC battery charging or compatible solar charging, subject to installation requirements.
Control enclosure placement: Install the control box at least 3 feet above ground and within cable-reach distance of the operator arm.
Battery placement: Keep the battery and control box within 4 feet of each other.
Safety compliance: The operator system is certified for compliance with UL 325, 7th Edition.
Residential use: Intended for single-family residential applications.
Warranty coverage: Ghost Pro Series kit components have a stated 24-month limited warranty; the motor and gear assembly has separate lifetime coverage under the manufacturer’s terms.

Detailed Product Description

The ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 uses motorized operator arms connected to the two swinging gate leaves. When an authorized control signal is received, the control board activates the motors and moves the gates through their programmed opening and closing travel. Mechanical stops and limit-setting procedures help establish the correct closed position.

The control box houses the system electronics and battery connections. The battery supplies stored DC power, while an approved charger or solar arrangement helps maintain battery capacity. The operator arms, mounting brackets, pivot hardware, cables, and control equipment are designed for outdoor residential gate installations, but correct alignment and drainage remain essential for long-term performance.

During normal use, inspect the gate path before opening or closing. Keep hinges lubricated according to their manufacturer’s instructions, remove leaves and mud from the travel area, and wipe dirt from the enclosure and operator arms with a soft, slightly damp cloth. Do not spray water directly into the control box, connectors, motor housing, or battery compartment. Periodically check mounting hardware, cables, battery terminals, and gate balance.

How to Install the LDM2 Dual Gate Opener

Confirm that the gate swings freely by hand, is properly aligned, and has adequate physical space for opening and closing.
Read the complete installation manual and disconnect all power sources before beginning wiring or mechanical work.
Install the required positive stop plate or equivalent gate stop as specified for the installation.
Attach the post and gate brackets using the supplied hardware and the exact mounting positions shown in the manual.
Mount the two operator arms so that neither arm binds throughout the gate’s full travel.
Choose a control-box location at least 3 feet above ground and within reach of the operator cables.
Install the battery and control box no more than 4 feet apart, observing polarity and connector orientation.
Connect the operator cables, battery harness, charger, and accessories according to the wiring diagram.
Pair the remote control or compatible access device using the product-specific programming procedure.
Set the closed limits, test opening and closing movement, and configure the optional automatic-close feature only after confirming safe operation.

Keep people, pets, vehicles, and tools away from the gate while testing. Never bypass safety equipment or connect power while wiring is exposed. If the gate moves unevenly, reverses unexpectedly, or fails to reach its stops, disconnect power and correct the mechanical alignment before continued testing.

Troubleshooting the Ghost Pro Series LDM2

Gate does not move: Check the battery charge, battery polarity, harness connections, control-box fuse or protection device, and remote-control battery. Verify that the gate is not physically locked or obstructed.
Only one gate leaf operates: Inspect the inactive arm’s cable, connectors, mounting hardware, and control-board connection. Confirm that both operator arms are configured for the dual-gate installation.
Gate stops or reverses: Look for soil, stones, vegetation, tight hinges, a damaged stop, or excessive gate resistance. A poorly balanced or sagging gate can overload the operator.
Gate closes too far: Recheck the positive stop and repeat the closed-limit adjustment using the exact procedure in the LDM2 manual.
Remote control does not work: Replace the remote battery, move closer to the control box, and repeat the approved pairing procedure.
Battery repeatedly discharges: Inspect the charger or solar circuit, wiring polarity, battery age, and gate usage. A battery that will not retain charge may require replacement.
Unidentified indicator or error condition: Record the control-box light pattern, disconnect power safely, and consult the official LDM2 manual or Ghost Controls technical support rather than guessing at a repair.

Register the product and retain the original dated receipt for warranty service. Ghost Controls lists technical support at 850-898-1411 and general product information at 850-558-5520. Warranty terms, eligibility, and required installation conditions apply.

Pros and Cons

Pro — Dual-gate operation: One kit is designed to control two swinging gate leaves, reducing the need for separate opener systems.
Pro — Low-voltage platform: The 12 VDC design supports battery-based installations and can be adapted to approved AC or solar charging arrangements.
Pro — Residential safety design: UL 325 certification provides an important safety benchmark for a residential automatic gate operator.
Pro — Expandable access: Remote controls and compatible accessories can support convenient entry management.
Pro — Long-term motor coverage: The motor and gear assembly has lifetime warranty coverage under the manufacturer’s stated terms.
Con — Battery is required: The necessary 12-volt battery is not included, so installation requires an additional power component.
Con — Installation precision matters: Incorrect bracket placement, poor gate alignment, or excessive hinge resistance can cause unreliable operation.
Con — Residential limitation: The system is intended for single-family residential use and may not suit commercial, industrial, or high-cycle entrances.
Best suited for: Homeowners with a properly aligned two-leaf swing gate who want battery-based automatic access.
Consider another solution if: The gate is heavily used, structurally damaged, sliding rather than swinging, or located in a setting requiring commercial-duty equipment.

PDF

Faqs

How do I set up the ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 for the first time?

Begin by confirming that the gate swings freely by hand and has a rigid horizontal mounting bar for each opener arm. Install the estate brackets according to the manual, maintaining the required gate clearance, then mount the control box and connect each arm to its matching color-coded terminal. Install a compatible 12-volt automotive or deep-cycle marine battery, connect the battery harness with correct polarity, and program the remotes only after both operators are wired securely.

What battery and power requirements apply to the ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2?

The ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 requires a 12-volt battery to operate, and the battery is not included with the basic kit. Use a suitable automotive or deep-cycle marine battery and protect it inside an appropriate battery box when exposed to weather. If using solar charging, connect only compatible Ghost Controls solar equipment and keep the total connected panel capacity within the control board’s specified limit.

Why does one gate leaf move while the other does not on the Ghost Pro Series LDM2?

First, disconnect power and inspect the inactive operator cable for loose terminals, damaged insulation, or reversed connections. Confirm that the wires are inserted into the correct color-coded control-board terminals and that each connector is fully tightened. Check whether the gate leaf binds against the post, ground, or stop. If wiring and movement are normal, review the dual-gate programming sequence so both operator arms are recognized and synchronized.

How can I troubleshoot a ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 that stops or reverses unexpectedly?

Inspect both gate leaves for friction, sagging, uneven hinges, debris, or wind resistance before changing electronic settings. The gates should move smoothly by hand and stop against properly positioned hardware. Check that the non-contact safety sensors are aligned, clean, and free from obstructions, then inspect wiring for moisture or loose connections. Never bypass safety devices. The system should reverse on contact with a rigid object or stop when a safety sensor detects an obstruction.

Can I use Bluetooth or Wi-Fi with the ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2?

The standard ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2 can be expanded for app-based access, but Bluetooth or Wi-Fi control requires the compatible Ghost Multi Connect kit and its associated mobile app. Before installation, confirm that the control box, battery, and internet or Bluetooth location meet the accessory’s requirements. Keep remote controls available as a backup, and test local gate operation before relying on smartphone access.

What gate and post conditions are required for Ghost Controls LDM2 compatibility?

The LDM2 is intended for a properly supported dual swing gate, not a dragging or poorly aligned gate. Each leaf needs a strong horizontal bar for the front operator mount, and the support posts must be rigid enough to hold the brackets without shifting. Wooden posts should be adequately sized and set securely. Measure the opening, clearance, swing direction, and operator-cable route before installation; push-to-open layouts require the appropriate accessory bracket kit.

How can I improve the performance of the ghostcontrols Ghost Pro Series Dual Gate Opener Kit LDM2?

Keep both gate leaves balanced, aligned, and easy to move manually before adjusting the opener. Lubricate suitable hinge points, remove vegetation and gravel from the swing path, and verify that the operator brackets remain tight. Position the control box and battery where cables can reach without strain, while protecting them from standing water and dirt. Test both leaves together after programming and reduce unnecessary remote activations to conserve battery power.

What maintenance should I perform on the Ghost Pro Series Dual Gate Opener Kit LDM2?

Inspect the LDM2 regularly for loose bracket bolts, damaged cables, corrosion, water intrusion, and deteriorating warning labels. Test the gate manually for binding, then activate the opener and verify smooth movement, correct sequencing, remote response, and safety reversal. Clean sensor lenses and check their alignment whenever the gate stops unexpectedly. Examine battery connections for corrosion and replace a weak battery with a compatible 12-volt unit rather than continuing to operate with unreliable power.