Setup: Gtech Multi K9 Vacuum Cleaner ATF037 User Manual

Content

Overview

The Multi K9 Vacuum Cleaner ATF037 is a cordless, handheld vacuum designed for domestic dry cleaning. Its compact design is suited to quick cleanups around the home, including stairs, upholstery, carpets, hard floors, and areas where pet hair collects.

The vacuum uses a removable rechargeable battery, a bagless dirt bin, a washable filter, and interchangeable cleaning tools. Its motorised Power Brush has a rotating brush bar for lifting hair and debris, while the Active Nozzle provides the connection point for the supplied attachments.

Specifications

  • Model: ATF037
  • Battery model: 113A1003
  • Battery: 22 V, 2000 mAh lithium-ion
  • Charging period: 4 hours
  • Charger output: 27 V DC, 500 mA
  • Weight: 1.5 kg with the standard nozzle
  • Cleaning type: Domestic dry vacuum cleaning
  • Power system: Rechargeable cordless battery

Detailed Description

The Multi K9 Vacuum Cleaner ATF037 has a main handheld body with an integrated handle, power control, battery compartment, bin, filter housing, and built-in Active Nozzle. The bin collects dry dirt and debris, while the filter helps protect the motor by trapping fine particles before air passes through the vacuum.

The Active Nozzle accepts the Dusting Brush, Crevice Tool, and Power Brush. The Dusting Brush is suitable for surfaces that need gentler contact. The Crevice Tool is intended for narrow gaps and is stored inside the handle for convenient access. The Power Brush contains a motorised rotating brush bar for loosening hair and embedded debris.

The package includes the Multi K9 vacuum cleaner, a fitted battery, a fitted bin, an Active Nozzle, Dusting Brush, Crevice Tool, Power Brush, charger, and scented cartridges. The attachments are designed for different cleaning situations, so select the tool that matches the surface and available space.

Safety

  • Read all instructions before operating the appliance and retain them for future reference.
  • Use the vacuum indoors in a dry environment. Do not use it in rain, store it outdoors, or charge it outdoors.
  • This appliance is intended for domestic dry vacuuming only. Do not collect liquids or vacuum wet surfaces.
  • Do not pick up burning, smoking, or flammable materials.
  • Keep the vacuum, charger, and accessories away from hot surfaces, sharp edges, and children who are not being supervised.
  • Keep hair, fingers, clothing, and other objects away from the rotating brush bar and other moving parts.
  • Do not block the air openings. Blocked airflow can reduce performance and may damage the appliance.
  • Take extra care when vacuuming stairs.
  • Check delicate fabrics, loose-weave materials, carpets, rugs, and upholstery in an inconspicuous area first. The rotating brush bar may damage some surfaces.
  • Do not leave the Power Brush operating in one place for an extended period.
  • Use only the supplied or recommended battery, charger, replacement parts, and accessories.
  • Inspect the charger cable and vacuum for wear or damage before use. Do not use damaged equipment.
  • Do not modify the appliance or charger. Do not carry the charger by its cable or pull the cable to disconnect it.
  • Keep the charger and vacuum away from water, and do not handle either with wet hands.
  • Remove the charger from the socket before removing the battery, cleaning, or carrying out maintenance.
  • Switch the vacuum off and remove the battery before changing tools or connecting and disconnecting the motorised Power Brush.
  • Do not use the vacuum without its filter fitted.
  • Never immerse the vacuum in water, place it in a dishwasher, or clean its exterior with solvents, polish, or liquid. Use a dry cloth.
  • Do not burn or expose the lithium-ion battery to high temperatures. Keep loose batteries away from metal objects that could short the terminals.
  • If battery fluid contacts the skin, wash immediately with soap and water. If it enters the eyes, rinse with clean water for at least 10 minutes and seek medical attention.

Setup and Operation

Turning the Vacuum On and Off

Press the button positioned above the handle to start or stop the Multi K9 Vacuum Cleaner ATF037. Keep the airflow openings clear while cleaning.

Charging the Battery

  1. Connect the supplied charger to the battery or the vacuum according to the available charging arrangement.
  2. Connect the charger to a suitable mains socket.
  3. Allow approximately 4 hours for a complete charge.
  4. Disconnect the charger after charging is complete or when the vacuum will be stored.

The battery may be charged while fitted to the main unit or separately. A one-hour charge can provide a shorter burst of cleaning when a full charge is not required.

Understanding the Battery Lights

  • During charging, the LEDs pulsate and illuminate in sequence.
  • When charging is complete, all LEDs remain solid green.
  • During use, the green lights switch off progressively from the bottom upward as the charge decreases.
  • A single flashing green light indicates that the battery should be recharged.

Fitting and Removing Attachments

Remove the battery before changing tools. Align the terminals on the Power Brush with the matching contacts on the Active Nozzle, then gently push the brush into position. To remove it, pull the Power Brush away from the vacuum without forcing the connection.

The Dusting Brush slides onto the Active Nozzle. The Crevice Tool is stored inside the handle and can be removed when required. Always choose the attachment that suits the surface and cleaning area.

Cleaning the Power Brush

  1. Switch the vacuum off and remove the battery.
  2. Remove the Power Brush from the Active Nozzle.
  3. Turn the brush-bar latch from the locked position to the unlocked position.
  4. Pull the brush bar out of the Power Brush.
  5. To remove wrapped hair, run open scissors along the groove in the brush bar and pull away the loosened hair.
  6. Reinstall the brush bar before operating the Power Brush.

Never run the Power Brush without the brush bar installed.

Cleaning and Maintenance

Emptying the Bin

  1. Remove the bin by pulling it away from the vacuum. A gentle side-to-side movement can make removal easier.
  2. Hold the bin over a waste container.
  3. Release the bin latch to empty the collected dirt.
  4. Tap the bin gently to dislodge remaining debris.
  5. Remove the filter and tap off loose dirt each time the bin is emptied.

Cleaning the Filter

  1. Pull the filter out from the top of the bin.
  2. Tap excess dirt from the filter and empty debris from the filter housing.
  3. Remove the scented cartridge before washing the filter.
  4. Rinse the filter under a tap and squeeze out excess water.
  5. Leave the filter to dry completely before refitting it.
  6. Use the spare filter while the washed filter is drying, if available.
  7. Ensure the filter tab is correctly refitted before use.

Never operate the vacuum without the filter installed. Running the appliance without the filter can allow debris to reach the motor.

Replacing Scented Cartridges

  1. Remove the used cartridge from the housing at the top of the filter.
  2. Take a replacement cartridge from its packaging and slide off the plastic sleeve.
  3. Insert the replacement cartridge into the filter housing.

Keep scented cartridges away from children. People with perfume sensitivities should use caution because the fragrance may cause an allergic reaction or skin sensitisation. If a cartridge is swallowed, seek medical advice immediately. Keep cartridges away from aquatic environments.

General Care

Regular maintenance consists of emptying the bin, keeping the filter clean, checking for obstructions, removing hair from the brush bar, and charging the battery. Wipe the vacuum and the area beneath the bin with a dry cloth. Do not wash the main unit, run it under a tap, or use water, solvents, or polish on its exterior.

Troubleshooting

Low Suction or Poor Cleaning

  1. Empty the bin.
  2. Clean the openings in the filter housing.
  3. Wash the filter and allow it to dry completely.
  4. Inspect the vacuum tube and both ends of the airflow path for blockages.
  5. Check the Crevice Tool and other attachments for trapped debris.
  6. Remove wrapped hair from the brush bar.

The Vacuum Stops or Will Not Start

  • Recharge the battery and confirm that the mains socket is switched on and working.
  • Check the vacuum and attachments for a blockage.
  • Inspect the brush bar for jamming. Switch the vacuum off, remove the battery, and clear any trapped material.
  • Make sure the bin and filter are fitted correctly.

Four Red Battery Lights

Switch the vacuum off and remove the battery. Check the airflow path, bin, filter housing, tools, and Power Brush for blockages. Clear the brush bar only after removing the battery. If the condition continues after these checks, stop using the appliance and arrange qualified assistance.

End-of-Life Disposal

Do not dispose of the vacuum or its lithium-ion battery with general household waste. When the appliance reaches the end of its service life, remove the battery and take both items to an appropriate electrical and battery recycling facility in accordance with local regulations.

Warranty

The Multi K9 Vacuum Cleaner ATF037 is covered for two years against material or manufacturing faults. The coverage begins on the purchase date, or the delivery date if that is later, and proof of purchase or delivery is required.

Warranty repairs or replacements are performed by the manufacturer or authorised agents. Replaced components become the property of the manufacturer, and repairing or replacing the appliance does not extend the original warranty period.

The warranty excludes normal wear items such as filters and brush bars, accidental damage, misuse, neglect, incorrect care, blockages, non-domestic use, non-genuine parts or accessories, and repairs or alterations performed by unauthorised parties.

Pros & Cons

Pros

  • Cordless handheld design for quick domestic dry cleaning.
  • Lightweight 1.5 kg configuration with the standard nozzle.
  • Removable lithium-ion battery that can be charged on or off the vacuum.
  • Motorised Power Brush helps loosen hair and debris.
  • Washable filter and easy-empty bin support routine maintenance.
  • Dusting Brush and onboard Crevice Tool provide flexible cleaning options.

Cons

  • It is not suitable for liquids, wet surfaces, outdoor use, or burning materials.
  • The brush bar requires regular hair removal when used on pet-hair-heavy areas.
  • The filter must dry completely after washing before the vacuum is used again.
  • Delicate fabrics and some flooring may be damaged by the rotating brush bar.
  • Blockages can stop the appliance or reduce suction until the airflow path is cleared.

PDF

Faqs

How do I set up and use the Multi K9 Vacuum Cleaner ATF037?

The Multi K9 comes largely assembled with the battery and bin fitted. Press the button above the handle to switch the vacuum on or off. Use the built-in active nozzle for general cleaning, attach the dusting brush for suitable surfaces, or remove the crevice tool from its onboard storage for narrow gaps. The power brush attaches to the active nozzle and should only be connected or removed when the vacuum is switched off and the battery has been removed.

How do I charge the Multi K9 battery, and what do the lights mean?

Charge the Multi K9 with the supplied charger and battery only. The battery may be charged while fitted to the vacuum or separately. Pulsating green LEDs indicate charging, while solid green LEDs indicate that charging is complete after approximately four hours. A one-hour charge can provide a shorter burst of cleaning. When only one green light flashes during use, recharge the battery. Keep the charger and vacuum indoors in a dry location.

How do I empty the Multi K9 dust bin without making a mess?

Hold the Multi K9 bin over a household rubbish container before releasing the latch. The bin pulls away from the main unit; gently wiggling it can make removal easier. Release the bin latch to drop out the collected dirt, then tap the bin lightly if debris remains. Remove the filter from the top of the bin and tap off loose dust whenever the bin is emptied. Refit the filter securely before using the vacuum.

How do I wash and refit the Multi K9 filter?

Remove the filter from the top of the dust bin and take out the scented cartridge before washing. Tap away loose debris, then rinse the filter under a tap and squeeze out excess water. Allow it to dry completely before refitting; using a spare filter lets you continue cleaning while it dries. Also clear dirt from the filter housing. Never operate the Multi K9 without its filter, because dust may damage the motor.

What should I do if the Multi K9 has weak suction?

Start by emptying the dust bin and checking whether the filter is dirty. Clean the openings in the filter housing, wash the filter if necessary, and let it dry fully before reinstalling it. If suction remains low, remove the battery and bin, then inspect both ends of the tube for obstructions. Check the dusting brush, crevice tool, and power brush for blockages as well. Hair around the brush bar can also reduce cleaning performance.

How do I remove hair from the Multi K9 power brush?

Switch off the Multi K9, remove the battery, and pull the power brush away from the active nozzle. Turn the brush-bar latch from the locked to unlocked position, then pull out the brush bar. Use an open pair of scissors along the brush-bar groove to cut wrapped hair, and pull the loosened hair away. Refit the brush bar before use. Never operate the power brush without the brush bar installed, and keep fingers away from moving parts.

Why has my Multi K9 stopped working or failed to start?

Check that the battery has enough charge and that the wall socket is switched on and working. If the vacuum still will not operate, inspect the bin, filter housing, tube, and attached tools for blockages. A jammed brush bar can also stop cleaning; switch off the appliance, remove the battery, and clear the obstruction safely. Do not use the vacuum if any component is damaged. Repairs and electrical work should be handled by a suitably qualified person.

What surfaces and materials should I avoid with the Multi K9?

The Multi K9 ATF037 is intended for domestic dry vacuum cleaning only. Do not use it to collect liquids, wet materials, burning or smoking items, or flammable substances. Avoid concrete, tarmacadam, and other rough surfaces. Because the power brush rotates continuously, do not leave it stationary on one area. Follow the flooring or upholstery maker’s care instructions, and test delicate fabrics or loose-weave materials in an inconspicuous place first.

More gtech manuals

Leave a Comment