Introduction

The J-Tech Digital Wireless Vertical Mouse V628M is designed for users with smaller hands, offering an ergonomic solution to reduce wrist strain. It features a rechargeable battery, USB-C charging, and both Bluetooth and USB connectivity options. The mouse includes customizable DPI settings and quiet buttons, making it suitable for various environments. Available in multiple colors, the V628M is priced around $29.99, making it an affordable choice for those seeking comfort and functionality in a vertical mouse.

Contents

• Wireless vertical mouse: X1
• User manual: X1
• USB nano receiver: X1
• Type-C charging cable: X1

Button Function

1. Left click
2. Scroll wheel
3. Right click
4. Charging connector
5. Indicator light
6. DPI cycle
7. Back button
8. Forward button
9. ON/OFF switch
10. USB (1)/Bluetooth (2) switch
11. Bluetooth pairing button

Features

• Vertical/upright mouse,
• With a sleek shape design
• 2 connection modes: 2.4GHz USB transceiver, Bluetooth 4.0 Built-in rechargeable Li-polymer battery

Installation

Plug the USB Nano receiver to a USB port in your computer, after detecting successfully the mouse will begin to function.

Specifications

• DPI: 800/1200/1600/2400
• Polling rate: 125Hz
• Working Voltage: 3.7V
• Working Current: ≤ 25mA

Description

The j-tech digital Wireless Vertical Mouse V628M boasts a sleek and ergonomic design that aligns your hand in a vertical position, significantly reducing the risk of wrist pain and other repetitive strain injuries. The contoured shape fits comfortably in the hand, providing support and stability. The mouse features a high-precision optical sensor that ensures smooth and accurate tracking on various surfaces.

The device is lightweight and easy to maneuver, making it suitable for both right-handed and left-handed users. The 5 programmable buttons allow for customization to fit individual needs, enhancing productivity and efficiency.

Connection Instructions

1. When the Nano receiver is plugged into a USB port, your computer will detect the device automatically
2. The mouse will then function when turned on. 2.4GHz: Set the 1/2 switch at the bottom of the mouse to 1, then connect the transceiver to a USB port on your computer.
   • The computer should detect the mouse in a matter of seconds and will then be ready to use. If your computer does not recognize the mouse, you can try to reprogram the mouse.
   • To program the mouse, hold the left and right click buttons down, while switching the mouse on, wait 3 seconds after turning on the mouse to release the buttons.

Bluetooth: Set the 1/2 switch at the bottom of the mouse to 2, then press the Bluetooth button at the bottom of the mouse to make the mouse discoverable. When the button is pressed, the color-changing LED on the side of the mouse will begin to flash.

The mouse should now appear as an available device on your computer, once it is paired to the computer, the LED light will stay on.

The color-changing LED on the side will flash when the DPI setting is changed. It will flash once when set to the first DPI (800), twice for the second DPI (1200), three times for the third DPI (1600) and four times for the fourth DPI (2400).

Driver Instruction

1. Installation
   You may download the driver for this mouse from our website www.jtechdigital.com
   Note: The driver is only for adjusting the functions of the mouse, the mouse is plug-and-play, and will still work without the driver.
   (Please make sure the mouse is connected to the computer when setting the functions in the driver.)

2. Setting
   These functions can be customized in the window below

   

   

3. Macro setting:
   • On the drop-down menu select "Assign Macro" to then click "Macro Manager" to pull up the Macro settings window.
   • Next, click "NEW" and name the Macro then hit Enter to set the name.
   • Then click the "Start Record" button under Record Options.
   • Once you are done recording the function, click "Stop Record" and click OK to save the Macro.
   • After a Macro is saved, it can be edited or overwritten at any time.
4. Other functions:
   Basic = Cut, Copy, Paste, etc.
   • 8 functions are available
     Advanced: Switch window, close window, etc.
   • 6 functions are available
     Media: Previous track, next track, stop, etc.
   • 7 functions are available
     You can also adjust the speed of tracking, double-clicking and scrolling.
     After setting the functions, click "Apply" to save all adjustments

Reestablish the connection between the Mouse and Transceiver
If your mouse is not working properly, try to reestablish the connection between the mouse and transceiver with the following steps:

1. Take out the Nano transceiver from the computer then reinsert, the computer will automatically detect the mouse for about 15 seconds.
2. Keep the mouse on with the batteries placed properly in the right direction.
3. Stay within the recommended distance between the mouse and receiver (10M)
4. Hold down the middle button (scroll wheel) and right click button at the same time for about 3 seconds then release them. The connection should take about 10 seconds to stabilize once again.
5. If after 10 seconds the connection has not stabilized, repeat steps 1-4 again.

Debugging Tips

• Check to make sure that the transceiver is connected to a USB port on your computer
• Check that the mouse is turned On
• Make sure the mouse and transceiver are within the recommended distance
• Try to reestablish the connection between the mouse and transceiver.

Setup Guide

To set up the j-tech digital V628M, follow these steps:

1. Insert the AA batteries into the mouse according to the polarity indicators.
2. Plug the wireless receiver into an available USB port on your computer.
3. Turn on the mouse by sliding the power switch to the "On" position.
4. The mouse should automatically pair with the receiver; if not, press the reset button on the underside of the mouse and receiver simultaneously for a few seconds.
5. You can now start using your mouse. For further customization, you may use software provided by j-tech digital or third-party mouse software.

Troubleshooting

If you encounter any issues with your Vertical Mouse V628M, here are some common problems and solutions:

• Mouse Not Connecting: Ensure the batteries are properly inserted and the power switch is turned on. Try resetting the mouse and receiver.
• Inaccurate Tracking: Clean the optical sensor and ensure the surface you are using is smooth and free from debris.
• Button Malfunction: Check if any button is stuck or if there is debris under the buttons. Clean the area if necessary.

Always refer to the user manual for detailed troubleshooting steps and safety precautions.

J-tech Digital Wireless Vertical Mouse V628M Pros & Cons

Pros:

• Ergonomic Design: Reduces wrist strain and promotes comfortable hand positioning.
• Long Battery Life: Up to 12 months on a single set of AA batteries.
• High Precision Sensor: Ensures smooth and accurate tracking.
• Customizable Buttons: 5 programmable buttons for enhanced productivity.
• Affordable Price: Priced competitively in the market.

Cons:

• Adjustment Period: May take some time to get used to the vertical design.
• Receiver Placement: The wireless receiver can be lost if not properly secured.
• Software Compatibility Issues: Some users may experience compatibility issues with certain software.

Customer Reviews

Customers have praised the j-tech digital Wireless Vertical Mouse V628M for its comfort and performance. Many users have reported a significant reduction in wrist pain after switching to this mouse. However, some users have mentioned an initial adjustment period due to the unique vertical design.

Common complaints include minor issues with button responsiveness and occasional connectivity drops, but these are generally rare and easily resolved.