Introduction

The K'NEX 6 Foot Ferris Wheel Building Set is an exciting and challenging construction kit designed for aspiring engineers and builders aged 16 and up. With over 8,551 colorful pieces, this set allows users to create a towering Ferris wheel that stands an impressive six feet tall. Equipped with a powered motor, the completed model comes to life, providing hours of entertainment and educational value. Priced at approximately $249.99, it offers a rewarding building experience for enthusiasts.

Specifications

• Includes over 8,500 pieces including rods, connectors, and other components.
• Stands at 6 feet tall when fully assembled.
• Features 24 gondolas that can be filled with riders for added realism.
• Motorized for continuous rotation.
• Comes with a battery-powered motor (batteries not included).
• Includes detailed instructions for assembly.

CAUTION 

ELECTRIC TOY: Not recommended for children under 16 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.

WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years.

CAUTION

• Be careful not to tip the model over. Model should be placed on a hard, flat surface.
• The K’NEX Motor should be examined periodically for potential hazard; any potentially hazardous components should be repaired or replaced.

CAUTION: Keep hands, face, hair and clothing away from all moving parts.

WARNING: Not suitable for children under 18 months. Long cord/Long chain. Strangulation hazard.

Connectors

You can slide these special connectors together. Push tightly until you hear a “click”. Pay close attention to the instructions and position them horizontally or vertically exactly as they are shown.

• Do not trip on the cord.
• Be sure to save these instructions.
• Adapter must be plugged into a 120 V (in the US) / 240 V (in the EU) outlet only.
• Before you use your K’NEX Motor Pack, read all instructions carefully.
• Never put your fingers in moving Gears; you will stop the motor and could injure yourself.
• Examine your Power Supply components regularly, looking for damaged parts, damage to cord or plug, or possible overheating.
• Do not use Power Supply until damage has been repaired.
• FOR INDOOR USE ONLY.
• Toy should not be connected to more than the recommended number of power supplies.
• The transformer is not intended for children under 3 years old .The transformer is not a toy.
• The toy must only be used with the recommended transformer.
• To prevent electric shock do not immerse in water, wipe clean with damp cloth.
• Electrical components can ‘short-out’ if exposed to water or moisture.
• Keep the electrical components dry.
• Always store in a dry area. Do not use when wet.
• Electrocution could occur when handeling the plug with wet hands.
• Do not handle plug with wet hands. 
  WARNING: Failure to comply with or observe all assembly, safety, and operation instructions and warnings regarding the use of this product may result in serious bodily injury.
• Unplug power cord if liquid or drink has spilled into the unit.
• To stop the movement of your motorized model, unplug the Adapter from the outlet.
• Never attempt to stop any moving piece; you may work the worm gear loose from the motor.
  • INPUT: 120V AC 60Hz 9W (US) / 240V AC 50Hz 9W (UK)
  • OUTPUT: 12V DC 500mA 6W

Important Tips:

• The wheel must be evenly balanced to turn properly. If the Ferris Wheel does not run smoothly, check to make sure the parts are firmly connected and that the shape of the wheel is as smooth a circle as you can make it.

Drive Wheel: (it makes the Ferris Wheel turn)

• Make sure that the tan locks are pushed into the holes on the small gray wheel.
• Make sure the rubber tire is fully on and centered around the small gray wheel.
• Make sure the drive wheel rides against the Ferris Wheel as shown in this picture.

Description

The K'NEX 6 Foot Ferris Wheel Building Set is a comprehensive kit that allows users to construct a large-scale Ferris wheel. The set includes a diverse array of components such as rods, connectors, and gondolas, all designed to fit together precisely. The motorized feature ensures that the Ferris wheel can rotate continuously, adding a dynamic element to the finished product.

The set is designed to be both functional and visually appealing, making it a great addition to any room or collection. It requires patience and dedication to assemble but offers a rewarding experience once completed.

Assembly Instructions

Important Tips:
The wheel must be evenly balanced to turn properly. If the Ferris Wheel does not run smoothly, check to make sure the parts are firmly connected and that the shape of the wheel is as smooth a circle as you can make it.

Drive Wheel: (it makes the Ferris Wheel turn)

• Make sure that the tan locks are pushed into the holes on the small gray wheel.
• Make sure the rubber tire is fully on and centered around the small gray wheel.
• Make sure the drive wheel rides against the Ferris Wheel as shown in this picture.

Important Tips:
You may need to remove two green rods to relax the shape of the outer wheel.

Setup Guide

To assemble the K'NEX 6 Foot Ferris Wheel Building Set, follow these steps:

1. Unpack all the components and organize them according to the instructions provided.
2. Start by building the base structure using the rods and connectors.
3. Assemble the central axis and attach the motor according to the instructions.
4. Construct the gondolas and attach them to the wheel structure.
5. Finalize by adding any decorative elements and ensuring all parts are securely connected.

It is recommended to have multiple people assist with the assembly due to its complexity and size.

Troubleshooting

If you encounter issues during assembly or operation, here are some common problems and solutions:

• Motor not working: Check if batteries are installed correctly and ensure all connections are secure.
• Gondolas not attaching properly: Ensure that all connectors are aligned correctly and securely fastened.
• Wheel not rotating smoothly: Check for any blockages or misaligned parts; adjust as necessary.

Always follow safety instructions and warnings provided in the manual to avoid any potential hazards.

K'NEX 6 Foot Ferris Wheel Building Set Pros & Cons

Pros

• Challenging and rewarding build experience.
• Enhances STEM skills and creativity.
• Motorized feature adds realism.
• Large-scale model makes it a centerpiece for any room.
• Detailed instructions make assembly manageable despite complexity.

Cons

• High price point may be prohibitive for some buyers.
• Requires significant time and space for assembly.
• Batteries not included with the set.
• May require additional support during assembly due to its size.

Customer Reviews

Customers have generally praised the K'NEX 6 Foot Ferris Wheel Building Set for its complexity and educational value. Many have noted that while it is challenging to assemble, the end result is highly rewarding. Some common complaints include the high price and the need for additional support during assembly.