Introduction of La-Z-Boy Executive Chair 45321

The La-Z-Boy Executive Chair 45321 is a high-quality, luxurious chair designed for ultimate comfort and style. This chair is perfect for any home office, study, or living room, and is built to last with a sturdy frame and premium materials. With a estimated price range of $500 to $700, this chair is an investment in your long-term comfort and well-being. The chair was launched in the market in the beginning of 2021.

Parts

La-Z-Boy Executive Chair 45321 Specifications

The La-Z-Boy Executive Chair 45321 features a number of key specifications, including:

• Dimensions: 30"W x 29"D x 45"H
• Weight capacity: 350 lbs.
• Fabric: Performance leather
• Recline mechanism: Manual recline with infinite locking positions
• Base: 5-star base with smooth-gliding casters

Chair Assembly Instructions

Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. 
Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. Using these casters on tile or wood flooring may cause floor surface damage, so please consider purchasing a chairmat to protect your floor surfaces.

1. Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the StarBase (B).

   

2. Turn the Star Base (B) over and insert the Gas Lift with Telescoping Cover (C) through the center hole on top of Star Base (B).

   

3. Attach Seat Plate (D) to the bottom of the Seat Cushion (F) (with the front of the seat plate facing the front of the seat cushion). Attach by using 1-3/4” Screws (J) for the front holes of the Seat Plate (D) and 1” Screws (I) for the rear holes of the Seat Plate (D) and tighten screws.

   

   *Note: Tighten the screws completely.

4. Insert Levers (D1 & D2) of Seat Plate (D) to the pre-attached cable lever receivers on the underside of Seat Cushion (F) (with the front of the levers facing the front of the seat cushion). Push down the key on the receivers to pull out the levers.

   

   

   *Note: Fix the cable for the seat plate into the plastic clips attached to the bottom of the seat cushion.

5. Attach the Back Cushion (G) to the Seat Cushion (F) by positioning the back support plate over the Seat Plate (D) with1-1/4” Screws (K).

   

   *Note: Do not tighten the screws completely.

6. Insert 2-1/2” Screws (L) into armholes, attaching Arms (E1 & E2) (with the front of arms facing the front of seat cushion) to sides of Seat Cushion (F) and Back Cushion (G).

   

   *Note: Tighten all the screws completely. Remember to tighten the back support plate screws.

7. Put the Plastic Shroud (H) over the Seat Plate (D) (with the front of the plastic shroud facing the front of the seat cushion). Align shroud posts to holes on the bottom of the Seat Cushion (F) and press them into position.

   

8. Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift with Telescoping Cover (C) into the center hole of the Seat Plate (D).

   

9. Press the Plastic Caps (M) into armrest holes once all screws have been tightened.

   

10. Remove the Packing Material (P) placed between the back cushion and the airframe. The chair is now ready for use.

    

La-Z-Boy Executive Chair 45321 Description

The La-Z-Boy Executive Chair 45321 is a stylish and comfortable chair that is built to last. The performance leather upholstery is both comfortable and durable, and the chair features a manual recline mechanism with infinite locking positions, allowing you to find the perfect position for reading, working, or relaxing. The 5-star base with smooth-gliding casters makes it easy to move the chair around your space, and the sturdy frame can support up to 350 lbs. With its timeless design and premium materials, the La-Z-Boy Executive Chair 45321 is the perfect addition to any home office or living room.

Operating Instructions

To Adjust Seat Height

1. While seated, lean forward and reach under the right side of the chair to find the lever.  Lift the lever and raise your body up slightly to allow the chair to rise to the desired height. 

2. Once the desired height is reached, release the lever to lock the chair at the desired height. 

3. To lower the seat, lift the lever while seated. The chair will descend until the lever is released or the chair reaches the bottom position.

To Operate Tilt Lockout

1. While seated, reach under the left side of the chair to find the lever. 

2. Push down the lever and lean back to allow the chair to tilt backward. 

3. To lock the chair in the upright or vertical position, sit upright and pull the lever to the up position.

To Adjust Tension On The Tilt

1. Reach under the front center of the chair, grasp the round knob (R) and turn it counter-clockwise to stiffen the tilt mechanism for a heavier user. 

2. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user. Rotate the knob (R) until the desired resistance is reached.

About the breathability of the Air Lumbar Cushion

• While seated, the open-air contours of the cushion which is designed to breathe and flex can dynamically provide continuous support by connecting with your body’s natural movement. 

• The air cushion conforms to the curve of your spinal cord and is intended to relieve your back from stress. 

Note: It is not intended to diagnose, treat, cure or prevent any disease. If pain increases, please discontinue use.
About the Neutral Posture of the Air Lumbar Cushion
The Air chair has been shown to help the user achieve Neutral Posture. Neutral Posture has been shown to reduce back strain and increase long-term seated comfort.

• Provides constant support as you lean back and twist

• Flexible lumbar pivots and conforms following your movement

• Continuous proper lumbar support help keep the body in an optimal working position for maximum comfort.

Setup Guide of La-Z-Boy Executive Chair 45321

1. Setting up the La-Z-Boy is easy and straightforward. Here's how to do it:
2. Unpack the chair from the box and remove all packaging materials.
3. Attach the arms to the chair by aligning the holes and using the included screws and bolts.
4. Attach the 5-star base to the bottom of the chair by aligning the holes and using the included screws and bolts.
5. Place the chair on a level surface and enjoy.

Troubleshooting

If you encounter any issues with your La-Z-Boy Executive Chair 45321, here are some common problems and solutions:

• The chair won't recline: Make sure the recline lever is in the unlocked position and try again.
• The chair is wobbling: Make sure the chair is on a level surface and that all screws and bolts are tight.
• The casters aren't gliding smoothly: Try cleaning the casters with a damp cloth and apply a silicone-based lubricant.

La-Z-Boy Executive Chair 45321 Warranty

In the event of a defect in material or workmanship covered by this warranty, True Innovations will repair or replace, at their discretion, without charge of the warranted furniture within a reasonable amount of time. We reserve the right to require damaged parts to be returned to us upon request. Natural markings such as scars, brands, grain variations, wrinkles, color variations, etc. will be considered normal characteristics and not construed as defects. We cannot warrant leather against scratching or scuffing, as all leather is subject to blemishes with use.

Pros & Cons

Pros

• Stylish and comfortable design
• Durable performance leather upholstery
• Manual recline mechanism with infinite locking positions
• Sturdy frame and 5-star base with smooth-gliding casters
• Supports up to 350 lbs.

Cons

• May be too large for smaller spaces
• Manual recline mechanism may be difficult for some to use
• Price may be high for some budgets

Customer Reviews about La-Z-Boy Executive Chair 45321

Customers love the La-Z-Boy Executive Chair 45321 for its comfort, style, and durability. The chair has received an average rating of 4.5 out of 5 stars, with many customers praising its sturdy construction, comfortable leather upholstery, and smooth recline mechanism. Some common complaints include the chair being too large for smaller spaces and the manual recline mechanism being difficult for some to use.