Introduction of Leivi Digital Display Smart Toilet T162A

The Leivi Toilet is a modern and innovative addition to any bathroom, designed to enhance comfort and convenience. This smart toilet features a built-in bidet seat with multiple washing settings, allowing users to customize their experience. With automatic lid opening and closing, heated seating, and a digital display for easy control, the T162A offers a luxurious touch. Additionally, it includes an energy-saving nightlight feature. The smart toilet is priced at $799.98.

Components

Functions Introduction

Washing function

Comfort functions

Cleaning fun

New functions

Parts name

Display

Product Drawings

Power and water connection tip

• If the power cord is not long enough, please do not use an extension cord.
• Only for reference. Bathroom sizes and configurations may vary.

Specifications

1. Rated power: Set the water volume, seat temperature, and water temperature to the highest level under the conditions of ambient temperature 68°F±41°F, inlet water static pressure 0.18MPa±0.02MPa, and inlet water temperature 59°F±33°F. Turn on the bidet function, and test the average power within 60 seconds after the temperature of the outlet water stabilizes.
2. Maximum power: Set the water volume, seat temperature, and water temperature to the highest level under the conditions of an ambient temperature of 73°F±35°F, an inlet static pressure of 0.18MPa±0.02MPa, and an inlet temperature of 41°F±33°F. Turn on the bidet function and continue to work stably at the maximum power for a cleaning cycle.
   The test method of nominal water consumption needs to correctly install the water-saving piece in the accessory kit on the angle valve according to the requirements of the installation instructions, and then perform the test according to the water consumption test standard.(Test the consumption three times for each, in which the pressure of the water hose is at a static pressure of 0.24Mpa and 0.55Mpa. Total gets six values, the sum is divided by six and the average is the nominal water consumption).

Description

Smart Toilet T162A boasts a sleek and modern design that fits seamlessly into any contemporary bathroom. The toilet features a one-piece construction with a ceramic glaze, ensuring durability and ease of maintenance. The digital display is intuitive, allowing users to adjust settings such as temperature, bidet functions, and flushing modes with simple touch controls.

Safety precautions

To prevent damage to the unit and possible injury to users, please follow the safety warnings. Please be sure to carefully read through the user’s manual before installation. Keep the user’s manual after installation to refer to for troubleshooting advice.

Symbols and meanings

WARNING: Could result in serious injury or death.

The following symbols are used to indicate important safety precautions when using the product.

Installation precaution

1. （1）Don’t install our product in a room with more than 90%RH humidity (relative humidity). It is suggested to separate dry space from moist one, such as installing shower rooms or shower curtains.
2. Only the specified power supply can be used. (Other power sources may cause product failure or damage).
3. Please do not supply water or power before finishing installation.
4. Please use wires and waterproof sockets suitable for the power of this product.
5. Please install the waterproof socket at a suitable height on the wall.
6. The water-supplying pressure should be 1.5kgf/cm²~7.5kgf/cm²（0.15MPa~0.75MPa）. The toilet cannot reach full cleaning functionality if the water pressure cannot reach 0.15MPa.
7. The water-supplying temperature should be 39.2°F~95°F.

Notice：
Please remove the dirty water from the pipe before installation. Residual sediment and other debris may jam in the pipeline if it is the newly decorated house, which may cause damage to the machine and affect the health of the human body.

Installation Tools

Leivi Digital Display Smart Toilet T162A installation

1. Install the water inlet valve
   Clean the ground and dry the water before installation. Mark the central lines of the draining outlet, and install the inlet valve on the wall.

   

2. Mark the curve of ceramics
   Align the drain hole of the ceramic with the central line. Mark the curve of ceramics for later installation. Glass cement application：Glue the outline with glass cement to install the toilet.
3. Toilet installation(Method 1)

   • Sealing ring installation
     Gently tilt the toilet sideways until it rests on the side surface. Install the sealing ring evenly along the outlet, and the small end of the sealing ring facing the toilet. Glue the edge of the toilet bottom with glass cement, place the toilet base along the outline, and position the toilet base.

     

   • Toilet (ceramic) installation
     Lift the toilet, take the floor drain as a reference, align the ceramic body of the toilet with the ceramic contour line drawn on the ground, and slowly put the ceramic on the ground so that the two marks overlap. After overlapping, press the ceramic down (can be pressed by the weight of the human body) so that the sealing ring fully contacts the ground.

     • Do not move the ceramic or shake it left and right after the marks are overlapped, otherwise the seal produced by the sealing ring may be damaged and cause water leakage.

       

4. Toilet installation(Method 2)

   • Remove the bidet seat
     Remove the fixing screws of the toilet; remove the connecting pipes and wires of the toilet, separate the bidet seat from the toilet.

     

   • Sealing ring installation Place the sealing ring onto the flange.

     

   • Ceramic installation
     Glue the edge of the toilet bottom with glass cement. Line up the toilet base over the flage screws. Place the toilet base and secure the flange bolts. Glue the edge of toilet bottom with glass cement, place the toilet base along the outline and position the toilet base.

     

   • Bidet seat installation
     Attach the connecting pipes and wires of the toilet, adjust the bidet seat to match the toilet, use the screws to fix the bidet seat on the toilet.
     Pay attention to the tightness of the pipes connection.

     

5. Connection of water inlet valve
   Connect the water inlet braided pipe to the water inlet angle valve; if the water pressure is high, you can install a flow restrictor or adjust the position of the angle valve to achieve the best flushing effect.
   NOTE: Clean the floor and tools, do not use the toilet immediately, it takes 48 hours to cure and keep the toilet dry.

   

6. Connect to power
   Connect the electricity plug with the protection unit. Press the power switch, the light turns on, the power is on, and hear the buzzer call.
7.  Using the product for the first time（Check every function button of the remote control, manual flushing, and side button function is normal.）
   • Open the water supply valve, and connect it to the power plug. Check that every function of the product is normal, such as rear/bidet wash, dry, flow adjustment, water temp adjustment, massage cleaning, swing cleaning, LED, seat heated adjustment, etc.
   • Rear/bidet wash perfermance test. Press the seat sensor with your hand to check if the nozzle works or not.
     • Notes： Open the water supply valve and connect to the power plug. When using the product for the first time, press the rear/bidet wash button in the remote control or knob. If the toilet doesn’t work, it may be a lack of water or the seat sensor is blocked.

Instructions for remote control Installation

Method 1：

1. Install the remote control fixing panel with a magnet on the remote control fixed seat and lock tightly. 
   Note: Pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside the fixed panel and enclose the small hole surface inside the fixed panel, as shown in the below figure 1.
2. Put the double-sided tape on the remote control fixed seat.
3. Clean dust, grease, and water droplets on the walls and wipe them clean.
4. Press the remote control fixed seat with double-sided tape on it. Press it evenly for 3 to 5 minutes. Attach the remote control fixed seat to the wall. Note: The method is applicable to glazed tiles, glass, and smooth walls.

Method 2：

1. Drill a hole of 78mm(3.07 in)-82mm(3.23 in) length and 22mm(0.87 in) depth on the wall by the drill with a diameter of 6mm(0.24 in). Note: the position of the hole shall be satisfied for the user to get the remote control conveniently when sitting on the seat.
2. After installation, the expansion plug in the wall shall align the fixing hole of the remote control and then lock the bolt. Install the remote control fixing panel with a magnet on the remote control fixed seat and lock tightly. Note: pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside. The fixed panel encloses the small hole surface inside the fixed panel; as shown in the below figure 2

Put the remote control on the fixed base after installing the battery, and the remote control can automatically absorb on the fixed base.

NOTE

• Please place the remote control on the fixed place if not used. (To avoid the remote control falling down)
• It may cause damage if the remote control falls down.
• Please do not spill water on the remote control or drop it into the water, as it may cause damage.

Remote control panel overview

• Remote control alignment: After the product is connected to the power supply, the remote control alignment operation can be carried out within 1 minute from the buzzer call.
• At the same time, press the “User 1” and “User 2” buttons on the remote control. After 3 seconds, the “rear wash/bidet wash/stop” three buttons flicker at the same time, press the “plus” to increase. Select the required level, press the “stop” button, buzzer calls, then the code is successful, then the remote control can only control the product; buzzer calls two times, representing code failure;
• If you want to cancel the alignment, press the “User 1” and “User 2” buttons on the remote control at the same time. After 3 seconds, the “rear wash/bidet wash/stop” buttons flicker at the same time. You can cancel the code by pressing the stop key directly.

Using instructions

1. STOP
   Press the button, all functions off.
2. REAR
   Press the button, rear spray function turns on, auto off after 2 mins or off by pressing  the stop button.
   Function will stop if user leaves.
3. BIDET
   Press the button, bidet/front spray function turns on, auto off after 2 mins or off by pressing the stop button.
   Function will stop if user leaves.
4. FLOW ADJUSTMENT
   Under rear/bidet wash mode, the water flow is settled on normal level( initial level is in the medium ).
   Press "FLOW" button to start the flow adjustment，and press plus button to increase flow, press minus button to decrease flow. Total 5 levels, and corresponding indicator will on under different level.
5. WATER TEMP SETTING
   Under rear/bidet wash mode, initial level is in the medium. 
   Press "TEMP" button to start the water temp, and press plus button to increase water temp, press minus button to decrease water temp, total 3 levels, and corresponding indicator will on under different level.
6. NOZZLE POSITION  ADJUSTMENT
   Under rear/bidet wash mode, initial level is in the medium. 
   Press "POSITION" button to start the position  adjustmen, and press plus button to forward the nozzle position, press minus button to backwaed the nozzle position. Total 3 levels, and corresponding indicator will on under different level.
7. SEAT TEMP ADJUSTMENT
   Seat heated after sitting, heat preservation after reaching the set temp. The initial level is in the medium. Press "SEAT" button to start the seat temp, and press plus button to increase the seat temperature, press minus button to decrease the seat temperature. Total 3 levels(including neutral), and corresponding indicator will on under different level.
8. MASSAGE
   During rear/bidet wash mode, press the "Massage" button, function will start after a beep.
   1. Interval massage mode: The nozzle sprays with varying pressure.
   2. Powerful massage mode: The nozzle sprays pressurized water.
      Remark: 
      The Massage cycle order is interval massage ＞ powerful massage ＞ regular cleaning.
9. SWING
   During rear/bidet wash mode, press the "Swing" button, function will start after a beep. During swing function, the nozzle will oscillate back and forth. Press the "Swing" button again to stop swing function. Pressing the "Stop" button will stop all cleaning functions.
10. FLUSH
    Press "flush" button to activate flushing.
11. DRY
    Press the button, drying function turns on.(Initial level is in the medium. Press plus button to increase warm dry temp. Press minus button to decrease warm dry temp，total 5 levels, and corresponding indicator will on under different level）Auto off after 2 mins or off by pressing the stop button.
    Function will stop if user leaves.
12. PERSONAL SETTING USER1/PERSONAL SETTING USER 2
    Under rear/bidet wash mode, you can set your preferred water temp, wand position, flow and warm dry temp. While cleaning is in progress, set your preferred water temp, flow, wand position and warm dry temp, and then press and hold (User1) or (User2)  for 2 seconds or longer. After (User1) or (User2) is pressed, please push the button used for rear/bidet wash. 
13. ECO
    Press the  button to enter energy saving mode.
    Under energy saving mode, seat temperature is low(level 1) to achieve energy saving; only the power indicator light on the display is on, others are off.
    Remark:
    1. Energy saving mode will be suspended and goes to function mode if someone uses the seat in the middle of energy saving.
    2. Seat temperature returns to the level which is settled, the display lights up normally.
    3. The energy saving mode is restored after the human body leaves the seat.
14. LID OPEN/CLOSE
    When lid open/close, press the button, lid automatically turn off/turn on.
15. SEAT OPEN/CLOSE
    When seat open/close, press the button, seat automatically turn off/turn on.
16. When lid close, press the button, the inductor sense that the lid is closing. 
    The program automatically open the lid，and then opening the seat automatically.
17. COMBINATION FUNCTION KEYS
    1. Stop + Rear wash:  Long press for 5 seconds to activate or deactivate the powerful deodorizing function.
    2. Stop + Bidet wash: Long press for 5 seconds to activate or deactivate the night light function. Stop + Massage: Long press for 5 seconds to activate or deactivate the foot sensing function . Flush + Rear wash: Long press for 5 seconds to activate or deactivate the pre-wetting. 
    3. Rear wash + Bidet wash: Long press for 5 seconds to activate or deactivate the automatic nozzle cleaning .

Knob function description

Sitting

• Bidet wash: Knob forward, spray bar extends, bidet wash works for about 2 minutes.
• Rear wash: Knob backward, spray bar extend, rear wash works about 2 minutes.
• Nozzle position: Under bidet/rear wash， knob forward or backward to adjust nozzle position. Stop: Under the bidet/rear wash， press the knob to stop the current working
• function.
• Drying: Without any function working, long press the knob for 2 seconds to start drying; Knob forward to make the wind temp higher, knob backward to make the winding
• temp lower. Flush: Without any function working, press the knob to flush.

Not sitting

• Press the knob to flush.
• Long press the knob for 5 seconds to start or close the knob indicator.

Foot sensing

• When the lid and seat are closed, short-touch the sensing area with your foot, and the lid automatically opens.
• When the lid and seat are closed, long touch the sensing area with your foot, and the lid and seat automatically open;
• When the lid open and， seat closed, short touch the sensing area with your foot and the seat automatically opens;
• When the lid and seat are open， short touch the sensing area with a foot to realize the flushing function.

Setup Guide

To set up the Leivi T162A, follow these steps:

1. Install the toilet according to the provided installation manual, ensuring proper connection to water and power sources.
2. Turn on the power and perform the initial setup using the digital display. This includes setting the language, date, and time.
3. Download and install the companion mobile app to connect the toilet via Bluetooth for additional customization options.
4. Adjust settings such as heated seat temperature, bidet functions, and night light brightness to your preference.

Cleaning

Maintenance and cleaning of lid and seat.

1.  Disconnect the power, turn the tee valve.
2. In case of using a mixture of washing agent and water as well as any available solution for seat cleaning, use soft and wet sponge or cloth to clean the seat. Use a soft towel to make the seat dry, or let it dry naturally.
   • The product is an electric appliance. Be careful not to allow water to get inside or leave detergent in the gap between the top unit and the bowl unit. Doing so could damage or malfunction.
   • Avoid using materials that will damage the surface-clean the surface with a soft and wet sponge or cotton cloth, instead of materials that can damage the surface.
   • Corrosive chemicals or cosmetics (such as cleaners containing abrasive compounds and aftershave) should not come in contact with the seat as this will damage the surface.
3.  Connect the power, and turn the tee valve.

Maintenance and cleaning of the bowl

1. Disconnect the power.
2. The bowl unit can be cleaned with a toilet brush, toilet detergent or a similar tool.
   1. Corrosive chemicals (such as cleaners containing abrasive compounds and strongly acidic cleaners or strong alkaline cleaners) should not wash the bowl as this will damage the surface of the bowl.
   2. Wire brush and abrasive nylon scrubbing brush should not wash the bowl as this will damage the surface of the bowl.
   3. Do not use any water repellant, stain-proofing cleaner or surface coating agent.
3.  Connect the power.
   1. Notice: If the bowl unit is clogged, use commercially available tools that are made for unclogging the toilet.

Cleaning the water filter

1. Unplug the product. Shutoff water supply

   

2. Remove the water-inflow filter from the inlet hose.

3. Take out the filter by using a flat-blade screwdriver to unscrew the filter .

   

4. Remove the filter screen and rinse it with clean water.
5. Install the filter screen as it is, and be sure to tighten it, otherwise, it will cause water leakage

Measures for special cases
When the toilet can’t be flushed automatically due to power interruption.

When the power is off, connect to the USB TPYE-C with a power bank to achieve the power-off flushing.

When the toilet can’t be flushed automatically due to water interruption.

1. Flush away the sewage in the toilet by a special basin for taking in water.
2. After water flushing, the water level is lowered and water is added to avoid stink.

Notice：
When the toilet can’t be flushed automatically due to water interruption. After long-term idle condition, make sure to wash it for several times and the inner pipelines are cleaned before use.

Maintenance in case of long-term idle status

1. Disconnect the power plug, and turn off the tee valve, unscrew the inlet hose. Exhaust the water inside the inlet hose.
2. Press the release button of the product, exhaust the water inside the toilet

Troubleshooting

Notice

If you are in trouble, please read the above troubleshooting and repair the product according to the instructions of the solution. If the problem is not in the common troubleshooting, please contact the professionals, or dealers, or call the national unified service hotline to ask for help. Please note that there will be no notification if any changes to this product and also accessories. There may be differences between contents and material objects, please be subject to the latter.

Pros & Cons

Pros

• Advanced bidet functions for enhanced hygiene.
• Heated seat and massaging jets for comfort.
• Self-cleaning technology for nozzle hygiene.
• Digital display for easy setting adjustments.
• Bluetooth connectivity for app customization.
• Water-efficient dual flush system.

Cons

• High price point.
• Complex installation may require professional help.
• Dependence on electricity and water supply.
• Potential for technical issues with digital components.

Customer Reviews

Customers have praised the Smart Toilet for its luxurious features and comfort. Here are some common reviews:

"The heated seat and massaging jets have been a game-changer for my morning routine. The digital display is very user-friendly, and the self-cleaning feature is a big plus." - John D.

"I was skeptical about the price, but the water efficiency and advanced hygiene features make it worth the investment. Highly recommend!" - Sarah K.

However, some customers have noted that the installation process can be complex and that technical issues can arise with the digital components.