Introduction

The Letscom F-533 Ring Fill Light is a versatile and high-quality lighting solution designed for content creators, vloggers, and photographers. This ring light, available for an estimated price of $69.99, is set to launch in mid-2023. With its adjustable brightness, color temperature, and built-in smartphone holder, the Letscom F-533 Ring Fill Light makes it easy to capture professional-looking photos and videos.

Package Contents

1. Ring Fill Light  × 1
2. Tripod Stand  × 1
3. Ball Head  × 1
4. Flexible Phone Holder  × 1
5. Fixed Phone Holder  × 1
6. Selfie Remote Control  × 1
7. User Manual  × 1

Specifications

At a Glance

1. Ring Fill Light 

   

2. Tripod Stand

   

3. Ball Head

   

4. Flexible Phone Holder

   

5. Fixed Phone Holder

Installation Guide

Tripod Stand

1. Loosen the tripod fastener.
2. Pull out the three legs of the tripod base. 
3. Hold the node of the tripod base and push down firmly to open the tripod.

4. Adjust the tripod to your desired height and tighten the tripod fastener.

   

5. Loosen the stand fasteners. Extend each stand to your desired height and tighten the fasteners.

Ring Fill Light

1. While holding the ring fill light in one hand, screw the ball head into the bottom of the light.
2. Screw the bottom of the ball head into the top of the tripod stand.
3. Screw the flexible phone holder into the screw hole on the ring fill light.
4. Loosen the ball head fastener, adjust the ring fill light to your desired angle, and then tighten the fastener.

You can also install your phone on the stand using the fixed phone holder.

• Clip the fixed phone holder to the middle pole of the tripod stand.

• Tighten the locking knob.

  

• Turn the adjustment knob counterclockwise to secure it to the pole.
• Place your phone on the holder and adjust the shooting angle as needed.

Description

The Letscom F-533 Ring Fill Light offers a 19-inch diameter and 55W LED beads, providing soft, even lighting without any harsh shadows. The light features a built-in dimmer, allowing you to adjust brightness levels from 1-100%, while the color temperature ranges from 2700K to 6500K. This range enables you to choose the perfect lighting for various scenarios, such as warm tones for portraits or cool tones for product shoots. The Letscom F-533 features a built-in 20-inch extendable smartphone holder, making it compatible with most smartphones. The holder can rotate 360 degrees, and the light itself can be adjusted up to 180 degrees, allowing you to find the ideal lighting angle for your shots.

Troubleshooting

• Issue: The ring light isn't turning on.
  Solution: Check the power supply, ensure the power adapter is securely connected, and try resetting the light by unplugging and re-plugging it in.
• Issue: The color temperature isn't changing.
  Solution: Ensure the color temperature knob is turned fully clockwise for cooler temperatures or counterclockwise for warmer temperatures. If it still doesn't work, check for any physical obstructions in the knob's path.

Warning: Do not look directly into the LEDs when the ring light is on, as it may cause harm to your eyes.

SAFETY AND WARRANTY

Safety Instructions

• This product must be used with an input power of 5V / 2A, and low power input will reduce the brightness of the ring fill light.
• Do NOT try to dismantle or modify the product.
• Keep this product away from water and any flammable gases or liquids.
• Do NOT repair the product in dangerous places such as gas, steam, etc. It is easy to conduct electricity in a humid environment.
• Do not let any liquid flow into the product, as this may seriously damage the product.
• Do NOT use the product in the environment where the room temperature is lower than 0°C (32°F) or higher than 45°C (113°F).
• Clean the product only with a dry, soft cotton cloth or equivalent. Do not scrub it with gasoline, volatile oil, etc.
• If an abnormal situation occurs, stop using the product and cut off the power immediately.
• Keep the product clean. When the product is not in use, store it properly.
• Keep the product out of the reach of children.

Warranty
We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer a one-year hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices.

Pros & Cons

Pros

• Adjustable brightness and color temperature.
• Extendable smartphone holder.
• Lightweight and portable design.
• USB-powered, allowing for versatile power source options.
• Affordable price point.

Cons

• Not compatible with larger cameras or devices.
• May not provide sufficient lighting in very large spaces.

Customer Reviews

"Great value for the price! The Letscom F-533 Ring Fill Light is perfect for my YouTube videos and makes a huge difference in my content's quality." - Sarah M.

"Easy to use, and the adjustable brightness is a game-changer. Highly recommend to anyone looking for a portable ring light solution!" - David T.

"I love the extendable smartphone holder. It's so convenient and easy to get the perfect shot." - Emily L.