Munchkin Brica Night Light Baby In-Sight MKTR0776 Introduction

The Munchkin Brica Night Light Baby In-Sight MKTR0776 is a versatile car mirror designed for parents to safely monitor their rear-facing baby during car rides. This innovative product features a glare-free LED night light, allowing clear visibility in low-light conditions. With four remote-activated light settings, including a soothing color spectrum, it enhances comfort for little ones while providing peace of mind for parents. The mirror is priced at $24.49 when purchased online.

Important Information 

WARNING:

• Always ensure that the mirror is properly secured on the headrest. Check frequently.
• Prevent strangulation or entanglement. Never place in or attach to a crib. Never add strings or ties to the mirror. Never leave a child unattended.
• Keep the mirror out of the baby's reach. Always follow the car seat manufacturer's directions for the correct installation and position of the child safety seat.
• Do not operate while driving the vehicle.
• Contains a button or coin cell battery. Hazardous if swallowed. A swallowed battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

How to Use Included Parts

1. Frame
2. Mirror
3. LED Lighting
4. ON/OFF Switch
5. OFF (O)
6. ON ( I )
7. Buckle

8. Battery Compartment

   REMOTE CONTROL

9. Base
10. Straps
11. Buckle
12. Safety Check
13. Night Light
14. Color Selection
15. Color Spectrum
16. Visor Clip

17. Battery Compartment (CR2032 battery included)

    

Specifications 

• Automatic brightness adjustment based on ambient light
• Soft, gentle glow to avoid disturbing baby's sleep
• Built-in sensor for optimal light levels
• Ease of use with a simple on/off switch
• Compact and sleek design suitable for any nursery
• Energy-efficient LED light source
• No batteries required; plug-in operation

Description

The Munchkin Brica Night Light Baby In-Sight MKTR0776 offers a unique blend of functionality and comfort. The night light emits a soft, gentle glow that illuminates the baby's room, allowing parents to check on their child without entering the room or turning on harsh overhead lights. The built-in sensor ensures that the light adjusts its brightness according to the ambient light in the room, providing optimal visibility while preserving a peaceful environment.

The design of this product is both modern and practical, making it easy to integrate into any nursery setup. Its compact size and sleek appearance ensure it does not take up much space, while its energy-efficient LED light source makes it an eco-friendly choice.

HOW TO INSTALL BATTERIES

BATTERY INFORMATION

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium, lithium-ion) batteries.
• Do not charge non-rechargeable batteries.
• Insert batteries in the correct polarity position.
• Do not short-circuit battery terminals.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries properly.
• Use caution when opening the battery compartment as some batteries may leak, explode, or catch on fire.
• Rechargeable batteries are to be removed before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not submerge in water or other liquids.

How to Use Munchkin Brica Night Light Baby In-Sight MKTR0776

MIRROR BATTERIES

To install four AAA/LR03 batteries (not included):

1. Unscrew battery compartment door using a Phillips-head screwdriver.
2. Insert four AAA/LR03 batteries. Ensure correct polarity as indicated in the battery compartment.
3. Close the compartment door and tighten the screw. Do not over tighten.

Setup Guide

To set up the Munchkin Brica Night Light Baby In-Sight MKTR0776, simply follow these steps:

1. Plug the night light into a nearby electrical outlet.
2. Position the night light in a corner or against a wall in the baby's room.
3. Turn on the night light using the simple on/off switch located at the back or bottom of the device.
4. The built-in sensor will automatically adjust the brightness of the light based on the ambient light in the room.

REMOTE CONTROL BATTERY

To replace CR2032 button battery (included):

1. Unscrew battery compartment door usinga  Phillips-head screwdriver.
2. Insert new CR2032 battery. Ensure correct polarity as indicated in the battery compartment.
3. Close the compartment door and tighten the screw. Do not over tighten.

HOW TO INSTALL

NOTE: For use on rear headrests. The mirror is not compatible with fixed headrests.

1. Raise the headrest if necessary. Wrap straps around the back of the headrest. Fasten buckles to secure.
2. Tighten straps by pulling strap ends away from buckles. Make sure the base is firmly held against the headrest.
3. Lower the headrest and adjust the mirror to the desired angle until the baby is visible to the driver.

HOW TO USE

1. Move the ON ( I ) / OFF (O) switch on the back of the mirror to the ON ( I ) position. 
   NOTE: Turn off mirror power when not in use to preserve battery life.

2. On the remote control, select the desired light mode:

   

	SAFETY CHECK (30 SECONDS)
	Activates soft white light for 30 seconds to conduct a quick check on baby To turn light OFF, press again

	NIGHT LIGHT (30 MINUTES)
	Activates extended soft white light for 30 minutes to see baby in the dark To turn light OFF, press again

	COLOR SELECTION (30 MINUTES)
	Warm Color Modes to Soothe Baby 1st press: ORANGE 2nd press:YELLOW Cool Color Modes to Keep Baby Alert 3rd press:GREEN 4th press:TEAL How to Turn Off 5th press:Turns light OFF NOTE: Pressing button after 5 seconds of any color will turn light OFF

	COLOR SPECTRUM (30 MINUTES)
	Activates alternating colors for 5 seconds each to entertain baby To turn light OFF, press again

How To Clean

• Wipe the mirror with a clean, damp cloth.
• Do not use bleach.
• Do not submerge in water.

Troubleshooting

If you encounter any issues with your Baby In-Sight MKTR0776, here are some common problems and solutions:

• No Light Output: Check if the device is properly plugged into an electrical outlet. Ensure that the on/off switch is in the "on" position.
• Inconsistent Brightness: Make sure there are no obstructions blocking the sensor. Clean the sensor area if it appears dirty.
• Warm or Hot Surface: Avoid touching or placing objects near the night light as it can get warm during operation.

Pros & Cons

Pros:

• Automatic brightness adjustment for optimal visibility
• Soft, gentle glow that does not disturb baby's sleep
• Compact and sleek design suitable for any nursery
• Energy-efficient LED light source
• Ease of use with a simple on/off switch

Cons:

• No battery option; requires a  constant power source
• May not be as bright as other night lights on the market
• Some users may find it slightly more expensive than basic night lights

Customer Reviews

Customers have praised the Munchkin Brica Night Light Baby In-Sight MKTR0776 for its ease of use and comforting glow. Many parents appreciate how it helps them check on their babies without disturbing their sleep. However, some users have noted that it might not be as bright as other night lights available.