NG-Teco Time Alarm Clock D2 Introduction

Streamline your day-to-day operations with the NG-Teco Time Alarm Clock D2, a digital alarm clock that is both flexible and easy to use. This alarm clock will keep you on schedule even when the power goes out thanks to its dependable battery backup, various alarm settings, snooze function, and easy-to-read digital display. You can't go wrong with this stylish and functional addition to your bedroom or office thanks to its modern design and user-friendly settings.

Detailed Specifications

The ng teco Time Alarm Clock D2 boasts several key features, including:

• Large 1.8 inch LCD display with adjustable brightness
• Dual alarm system with snooze function
• 12/24 hour time format
• Date and temperature display
• Built-in USB charging port
• Sleek and modern design

Components

Power Supply

Description

The ng teco Time Alarm Clock D2 is not just an alarm clock, it's a statement piece. With its sleek and modern design, it will fit perfectly in any room. The large 1.8 inch LCD display with adjustable brightness ensures that you can easily read the time, even in low light conditions. The dual alarm system with snooze function allows you to set two different alarms, perfect for couples or roommates. The 12/24 hour time format and date display ensure that you are always up-to-date. The built-in USB charging port is a convenient feature, allowing you to charge your phone or other devices while you sleep.

Enroll User’s Fingerprint

Correct and Incorrect Finger position

• Place the finger flat and centered on the sensor surface.
• Avoid angled/tilted position.
• Place the finger consecutively until the success message appears.

Add a new User on Clock

1. Go to [Users] and then [Add User].
2. Enter the First Name, Last Name of the user.
3. Select Enroll FP to enroll the fingerprint.
4. Similarly, select Enroll PWD to enroll the password.
5. Set the user permission as Employee/Admin.

6. Press the Up/Down arrow key to navigate to the [Save] button, and press the <M/OK> key to save the data.

   

Setup Pay Period

1. Go to [Pay Period].
2. You can choose Weekly, Biweekly, Semi-monthly, or Monthly pay period type according to the payroll policy.

3. The Time Report will be generated based on the selected pay period type.

   

Configure Attendance Rule

• Go to [Rule].
• Maximum Work Hours: Verifies if there is a missing punch when the total worked hours exceeds this value.
• Day Cutoff Time: It is the time that determines whether to count the worked hours to the previous day or next day.

• Duplicate Punch Interval: Avoids multiple attendance punches within the specified time.

  

Enroll Users in Batch through USB

1. Go to [Users] then select [Upload Users].
2. Insert the USB drive to the clock, then select [Download Template File-1].
3. Add the user details to the template file ecuser.txt on PC and save.
4. Insert the USB drive back to the clock and select [Upload User File] on the same screen.

5. Then go to [User List], select the user and enroll the fingerprint.

   

Download Time Report

1. Insert the USB drive to the clock.
2. Go to [Time Report] and select the required time period.
3. Select the time format to be displayed on the report.

4. Press <M/OK> to download the report.

   

Reset Date and Time

1. Go to [System], then select [Date and Time].
2. Set the Date, Time and the Format.
3. Enable Daylight Saving Time if required.

4. Press the <M/OK> key to save.

   

Add Missing Punch

1. Go to [Time Data], then select [Add Missing Punch].
2. Select the user, then enter the punch date, time and state.

3. Navigate to [Confirm] and press <M/OK> to save.

   

Backup User Data

1. Insert a USB drive to the clock.
2. Go to [Users] and then [Download users].

3. When you need to recover the data, rename the downloaded file to ecuser.txt and upload it.

   

Delete Data

1. Go to [Data] and click [Delete All Data] to clean all the clock data.

2. Go to [Data] and click [Delete Attlog] to delete all the attendance data.

   

Upgrade Firmware

1. Initially, download the firmware from the website and save it to the root folder of the USB drive.
2. Plug the USB drive to the clock.
3. Go to [Data] and then [Upgrade Firmware].

4. Restart the clock after upgrading the firmware.

   

   

Setup Guide

Setting up the NG-Teco Time Alarm Clock D2 is easy and straightforward:

1. Insert the batteries (not included) into the back of the clock.
2. Use the buttons on the back of the clock to set the time and date.
3. Press the "Alarm 1" or "Alarm 2" button to set your desired alarm time.
4. To enable the snooze function, press the "Snooze/Light" button.
5. Connect your device to the built-in USB charging port.

Setup Wi-Fi manually

1. Go to [Comm.] then [Wi-Fi Manual Setup].
2. Select the required Wi-Fi connection.
3. Navigate to [Password] and then enter the correct password to connect with Wi-Fi.

4. Navigate to the [Confirm] button and press the <M/OK> key to save.

   

Setup Wi-Fi through USB

1. Go to [Comm.] then [Wi-Fi Setup by USB].
2. Insert the USB drive to the clock then select [Download] to save the config file as ecwifi.txt.
3. Open ecwifi.txt on PC, enter the Wi-Fi name(SSID) and Password then save.

4. Insert the USB drive back to the clock, then navigate to [Upload] on the same screen to upload the settings.

   

Download the Mobile App

Download the “NGTeco Time” App from the Google Play store or Apple store from your mobile device.

1. Connect your mobile to the same Wi-Fi network of the clock.
2. Go to [Comm.] then click [App Connection] to view the QR code.
3. Open the Mobile App and press the icon to scan the QR code from the clock.
4. Then the mobile app connects to the clock automatically.

5. After successful connection, you can setup the clock options from the App.

   

Setup Pay Period and Attendance Rule from App

1. Go to Setup menu.
2. Set the Pay Period.
3. Set the Start Day of the week.
4. Set the Day Cutoff Time.
5. Set the Duplicate Punch Interval.
6. Set the Maximum Work Hours.
7. Set the Time Format for report.

8. Click Save & Sync to sync the settings to the clock.

   

Register users from App

1. Go to Users menu.
2. Click the Add User icon to add a new user.
3. The User ID can be autogenerated or manually assigned.
4. Enter the First Name, Last Name and Password.
5. Set the permission.
6. Click Save & Sync to sync the user details to the time clock.

7. Open User List on the clock to enroll user’s fingerprint from the clock.

   

Download Time Report from App

1. Go to Report menu.
2. Select the specific Pay Period. Or, select Custom Period and set a date range within 31 days.
3. Click Download Timecard Report to generate the time report.

4. Next, enter the email addresses and send the email by clicking Email Timecard Report.

   

Add Missing Punch from App

1. Go to Attendance menu.
2. Click the Add Punch icon.
3. Select the user to add the missing punch.
4. Select the Punch Date and Time.
5. Select the Punch State.

6. Click Save & Sync to sync the attendance details to the clock.

   

Troubleshooting

If you encounter any issues with your NG-Teco Time Alarm Clock D2, try the following solutions:

• Make sure the batteries are inserted correctly.
• Check that the clock is set to the correct time and date.
• Ensure that the alarm is set to the correct time.
• Try resetting the clock to its factory settings.
• If the LCD display is too bright, adjust the brightness setting.

NG-Teco Time Alarm Clock D2 Pros & Cons

• Pros
  • Large and easy-to-read LCD display
  • Dual alarm system with snooze function
  • Built-in USB charging port
  • Sleek and modern design
• Cons
  • Batteries are not included
  • No radio or Bluetooth connectivity

Customer Reviews

Customers love the NG-Teco Time Alarm Clock D2 for its large and easy-to-read LCD display, dual alarm system with snooze function, and built-in USB charging port. The sleek and modern design is a hit, and the clock is described as "functional and stylish." The only complaints are that the batteries are not included and that there is no radio or Bluetooth connectivity.