Introduction of Nutribullet 900W Blender Smoothie Maker

The Nutribullet 900W Blender Smoothie Maker is a powerful and versatile kitchen appliance designed to help you create nutritious and delicious smoothies with ease. This blender features a 900-watt motor, making it ideal for blending tough ingredients like ice, nuts, and seeds. With its sleek and compact design, the Nutribullet Smoothie Maker is a great addition to any kitchen. It is available for around $80 to $100 and was launched in 2012.

What’s included

Detailed Specifications

The Nutribullet 900W Blender Smoothie Maker comes with the following key features:

• 900-watt motor
• Cyclonic action technology
• BPA-free plastic cups and lids
• Extractor blades made from stainless steel
• Two blending cups (32 oz and 24 oz)
• Power base with non-slip feet
• Recipe book with 100+ recipes

Nutribullet 900W Blender Smoothie Maker Description

The Nutribullet 900W Blender Smoothie Maker is a high-performance blender that can handle a variety of ingredients with ease. Its powerful motor and cyclonic action technology allow for efficient blending, while the extractor blades made from stainless steel easily break down fruits, vegetables, nuts, and seeds. The BPA-free plastic cups are durable and easy to clean, and the lids ensure that your smoothies stay fresh and sealed. The Nutribullet Smoothie Maker is also compact and lightweight, making it easy to store in your kitchen or take with you on the go.

How it works

DO NOT RUN SOUPERBLAST MODE WITH ANY OF THE BLENDING CUPS. ONLY USE THE VENTED SOUPERBLAST PITCHER. READ ALL SAFETY INSTRUCTIONS FIRST!

Extracting for smoothies base

This will activate the NutriBullet Rx’s SMART Technology function, causing the G-Button at the front of the unit to glow GREEN, and initiating the 1-minute extraction cycle. 

1. Add ingredients into one of the cups.

   

2. Fill with liquid up to the MAX Line. Then, twist the extractor blade onto the cup and tighten by hand to make sure the vessel is sealed.

3. Plug the motor base into an electrical outlet. Press the power button, located 90˚ to the left side of the G-Button, to turn the machine on. The power button light will glow BLUE, signifying power. Next, place the cup blade-side-down onto the motor 

   

4. When the cycle has completed and the GREEN light has turned off, turn off the unit by depressing the power button, located 90˚ to the left side of the G-Button. The BLUE light will stop glowing, signifying the power is off.

NOTE: You can remove the cup at any time during the blending cycle by simply lifting the cup off of the motor base. If more extraction is required, lift the cup off of the motor base, wait 15 seconds, then return it back onto the motor base to start another SMART Technology cycle. Do not repeat more than 3 consecutive cycles resting 15 seconds between cycles. If you press the GREEN G-Button for 2 seconds and the light turns ORANGE, you have switched in souperblast mode. Simply lift the cup off the motor base at any time to exit this mode or press the power button, located 90˚ to the left side of the 
G-Button. When the vessel is removed from the motor base, only the G-Button light will turn off. When the power off button is pressed, the BLUE light will turn off and the blade will stop spinning. Always press the power off button upon completion  
of processing. 

NOTE: If at any time the G-    Button is pushed for 2 seconds, the button will turn ORANGE and initiate souperblast mode.

WARNING! TO TURN OFF THE MACHINE AT ANYTIME DURING  THE SMOOTHIE CYCLE  (G-BUTTON WILL BE GREEN), press the power button, located 90˚ to the left side of the G-Button or lift the cup off the motor base. 

Extracting for souperblasts

1. Twist the extractor blade onto the souperblast pitcher.

2. Add ingredients into the souperblast pitcher and securely attach the vented, 2-piece lid souperblast pitcher lid.

   

3. Plug the motor base into an electrical outlet. Press the power button located 90˚ to the left side of the G-Button, to turn the machine on. Next, place the pitcher blade-side-down onto the motor base. This will activate the NutriBullet Rx’s SMART Technology function, causing the G-Button at the front of the unit to glow GREEN.

4. Press the GREEN G-Button down for 2 seconds until it glows ORANGE. This will indicate that souperblast mode has begun. The unit will run in souperblast mode for about 7 minutes before automatically turning off, causing the ingredients inside the souperblast pitcher to heat up to about 70 degrees Celsius/150 degrees Fahrenheit. The unit is programmed to slow down twice during the 7-minute cycle to allow ingredients to settle for improved processing. This is normal.  Do not repeat souperblast mode for the same hot soup. 

   

If more heat is required, place the contents in a microwave-safe container and continue heating to desir ed temperature. To make a new soup, empty old contents, add new ingredients and wait 1 full minute before returning the vessel to the motor base to start a new SMART Technology cycle. Do not repeat more than 2 cycles in souperblast mode resting 1 minute between cycles. After 2 consecutive cycles, allow the NutriBullet Rx motor base and souperblast accessories to cool off for 30-60 min. Depress the power button upon completion.

WARNING! 

After souperblast mode,  the SOUPERBLAST PITCHER SURFACE, BLADES AND COUPLING GEAR WILL 
BE HOT! DO NOT TOUCH DIRECTLY WITH HANDS! Always use heat resistant pads to grasp the handle and to support the bottom of the souperblast pitcher.  IF YOU DESIRE SOUP TO BE  HOTTER OR YOU WISH TO   RE-HEAT SOUP, TRANSFER  FIRST TO AN APPROPRIATE  MICROWAVE SAFE   CONTAINER  OR STOVE TOP  POT AND HEAT SEPARATELY —DO NOT REHEAT IN THE   NutriBullet Rx.

TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G BUTTON WILL BE ORANGE), press the power off button, located 90˚ to the left side of the G-Button or lift the souperblast pitcher off the motor base.

Building a Smoothie

Our go-to guide to building a great smoothie, every time. For the best results, add ingredients in the order listed below.

1. You must always add liquid before you blend a smoothie.
2. Don’t overfill your pitcher. Make sure your ingredients and liquid reach no higher than the MAX line and liquid MAX line.
3. For a cooler, more flavorful smoothie, we recommend using frozen fruit and/or veggies. You can also add ice but not more than 25% of the pitcher's total volume.

Our perfected method

CAUTION: NEVER add hot or carbonated ingredients to the sealed NutriBullet cup. This can pressurize the sealed cup which can erupt on opening, causing personal injury.

What is Nutrient Extraction?

Nutrient extraction is the process of breaking plant foods down into tiny, drinkable particles so your body can absorb them more efficiently. The NutriBullet’s powerful motor, sharp spinning blades, and pitcher shapes are designed to maximize its extraction capabilities.

Ingredients Guide

Greens & Veggies

• Carrot
• Cauliflower
• Collard greens
• Kale
• Romaine lettuce
• Spinach
• Swiss chard
• Zucchini

Nuts

• Almonds
• Cashews
• Peanuts
• Pecans
• Walnuts

Boosts

• Herbs and spices (cinnamon, fresh mint, fresh basil, fresh cilantro, ground ginger or turmeric, fresh ginger or turmeric root)
• High-quality protein powders
• Nut butters (almond, peanut, cashew, sunflower seed)
• Superfood powders (cacao, maca, chlorella, spirulina)
• Seeds (chia seeds, flax seeds, hemp seeds)
• Sweeteners (honey, agave, maple syrup)

Liquid to the Max Line

• Almond milk
• Cashew milk
• Coconut milk
• Coconut water
• Hemp seed milk
• Oat milk
• Soy milk
• Tea, chilled
• Water

Fruit

• Apple
• Avocado
• Banana
• Berries
• Cherries
• Mango
• Orange
• Peach
• Pear
• Pineapple
• Plum

CAUTION: The following list of seeds and pits contain chemicals that release cyanide into the body when ingested. Do not use the following seeds and pits in the NutriBullet Rx: apple seeds, apricot pits, cherry pits, plum pits, peach pits.

Setup Guide

Setting up the Nutribullet 900W Blender Smoothie Maker is easy and straightforward:

1. Place the power base on a flat and dry surface.
2. Attach the extractor blades to the bottom of one of the blending cups.
3. Add your ingredients to the blending cup.
4. Attach the blending cup to the power base.
5. Press down on the cup to start blending.
6. When you're finished blending, remove the cup from the power base and attach a lid to take your smoothie with you.

Important Safeguards & Cautionary Information

For your safety, carefully read all instructions before operating your NutriBullet® Rx. Save these instructions!

FOR HOUSEHOLD USE ONLY

ELECTRICAL SAFETY

When using any electrical appliance, basic safety precautions should always be observed, including the following:

• CAUTION! To avoid the risk of electric shock, never immerse the cord, plug, or motor base of the NutriBullet Rx in water.
• Do not use this product with any type of adaptor or voltage converter device.
• The use of attachments that are not recommended or sold by NutriBullet may cause fire, electric shock, or injury and void the warranty.
• Use of adapters and voltage converters is considered an unauthorized modification of the product and as such will void the warranty. Use of this product in countries with different electrical specifications may damage the product.
• Depress the Power Button to OFF and unplug the NutriBullet Rx when it is not in use. Make sure the motor base is unplugged before assembling, disassembling, adding additional parts, or cleaning.
• Read and follow the important information attached to the power cord. The plug and cord set is not suitable for replacement. If damaged the appliance should be replaced.
• Do not pull, twist, or damage the power cord.

POLARIZED PLUG INFORMATION

• This appliance has a polarized plug (one prong is wider than the other) to reduce the risk of electric shock. This plug will correctly fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Doing so will void the warranty.
• CAUTION! Keep cord out of reach of children. Do not allow the cord to hang over the side of the counter or table.
• Do not allow the cord to touch hot surfaces, including the stove.
• Periodically inspect the cord and plug for damage. Do not operate any appliance with a damaged cord or plug. If the appliance malfunctions or is dropped or damaged in any manner, discontinue use. Contact customer service for assistance in obtaining a replacement.
• Depress the blue illuminated power button to switch off the appliance after each use. Disconnect from the power outlet before changing accessories or handling blades.
• Warning! Potential for personal injury from misuse. Take care when handling the sharp cutting blades, pouring hot soup from the pitcher, and during cleaning.
• Close adult supervision is required when this appliance is used by or near children. Never leave children unattended.
• Periodically inspect all NutriBullet Rx components for damage or wear that may impair proper function or present an electrical hazard. Assure that the power cord and plug are undamaged. Discontinue use and replace cups or souperblast pitcher if you detect cracking, crazing, cloudiness, or damage to the plastic. Assure that the blades rotate freely and that the gasket is seated and undamaged. Assure that motor base switch actuators are unobstructed, clean, and depress easily. Follow maintenance in the User Manual and never operate your NutriBullet Rx with damaged components. If your NutriBullet Rx malfunctions in any way, immediately discontinue use and contact NutriBullet Customer Service.

WARNING: TO AVOID PERSONAL INJURY, NEVER BLEND HOT INGREDIENTS OR LIQUIDS IN ANY UNVENTED BLENDING CUP OR PITCHER WITH LID!!

Heated ingredients can pressurize sealed containers when agitated and violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler). Never operate for more than one-cycle to create a smoothie. Blade friction from repeated operation can heat ingredients and generate internal pressure in the sealed cups. If the blending cup is warm to touch, allow to cool. Slowly unscrew the blade assembly from the blending cup, pointed away from your face and body, to release any residual pressure. Pressure can cause the blended contents to erupt from the cup, resulting in possible personal injury or property damage. Never blend carbonated liquids or effervescing ingredients (e.g., baking soda, baking powder, yeast, etc.) In an unvented sealed cup. Pressure from released gases can cause a sealed blending cup to burst, resulting in possible injury or property damage. Sugar in fruits and vegetables can ferment over time, releasing gases and causing pressure to build up in a sealed blending cup. If you will not consume your smoothie immediately, remove the blade, attach the stay fresh lid to the cup or cover with plastic wrap, and refrigerate. Never store any blended mixture in a sealed Blending cup either unrefrigerated or for any prolonged period of time; contents will spoil and ferment.

BLADE SAFETY

Blades are sharp! Handle carefully.

• Use care when handling any blade. To avoid laceration injury, do not handle or touch any blade edge.
• To prevent leakage and the possible separation of components during operation, properly align and securely attach (hand tighten) the blade to a blending cup or souperblast pitcher, and check for leakage before placing it on the motor base and operating your NutriBullet Rx.
• Never store any blade in the motor base unless attached to a cup or pitcher. An exposed blade can present a laceration hazard.

VENTILATION CAUTION!

Always operate the NutriBullet Rx on a level surface, leaving unobstructed space beneath and around the motor base to permit proper air circulation. Slots and openings on the bottom of the product are provided for ventilation to ensure reliable motor operation and to prevent over-heating. Warning: to prevent fire hazard, motor base openings should be free of dust or lint and never obstructed with flammable materials such as newspapers, tablecloths, napkins, dishtowels, or place mats.

EXTRACTION SAFETY PRECAUTIONS

The NutriBullet Rx has two modes, smoothie mode and souperblast mode, which are further explained in the “How It Works” section of this manual. Carefully read and follow all the safety precautions, particularly when operating the NutriBullet Rx in souperblast mode.

• WARNING! NEVER LEAVE THE NutriBullet Rx UNATTENDED WHILE IN USE! CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED BY OR NEAR CHILDREN.
• NEVER USE THE EXTRACTOR BLADE TO BLEND WITHOUT LIQUID AS DOING SO MAY DAMAGE THE BLADE AND MOTOR.
• Never put your hands or utensils near the moving blade. Never use your hands or utensils to depress the activator buttons while the NutriBullet Rx is plugged in.
• Blades are sharp! Handle carefully. Use care while handling the blades not to touch the blade edges to avoid laceration injury.
• Check the gasket to make sure it is completely seated in the cross blade unit before each use. Contact customer service for assistance if the gasket is not completely seated.
• We recommend replacing your extractor blade every 6 months or as needed for optimal performance. To order a replacement blade, simply visit: nutribullet.com/shop/accessories
• The NutriBullet Rx is not intended for use on the stove top. Do not place the motor base or any NutriBullet accessory on the stove or microwave or immerse in boiling water. This may result in damage to the accessory.
• Do not place any of the NutriBullet Rx parts in a microwave, oven, or in a stovetop pot, or immerse in boiling water, as this may result in damage to the part.
• Never blend carbonated beverages. Built-up pressure from released gases can cause the container to burst, resulting in possible injury.
• Do not put hot liquids in an unvented blending vessel before blending. Start with cool or room temperature ingredients (21°C/70°F or less). Soup will heat in the souper pitcher during the extraction process to ~65°C/150°F.
• Do not run the NutriBullet Rx with empty NutriBullet Rx cups or soupblast pitcher as this can damage the unit.
• After blending ingredients in the oversized or short cup, remove the blade assembly—allow the vessel with its contents to settle and to release any pressure that may have built up during the extraction process. If you will not consume it immediately, use the stay fresh lid to close the container and refrigerate. Unscrew the lid and release pressure periodically if storing longer than a few hours to release any added pressure that may have built up due to fermentation.
• Never permit any blended mixture to sit inside a cup sealed with a blade base without first releasing the pressure.
• Do not allow smoothies or souperblasts to sit for long periods in a sealed container. The sugars in the fruit and vegetables can ferment, causing pressure to build up and expand in the vessel which can cause ingredients to burst and spray out when moved or opened. Release pressure by carefully unscrewing the lid and opening the cup for a few moments.
• Avoid contact with moving parts.
• To reduce the risk of injury, never place the blade assembly on the motor base without a cup or pitcher properly attached.
• NEVER PUT THE EXTRACTOR BLADE ON THE MOTOR BASE WITHOUT BEING SECURELY ASSEMBLED ONTO THE CUP FIRST.
• Always operate the pitcher with the vented cover in place.
• Keep hands and utensils away from the cutting blade while chopping or blending food to reduce the risk of severe personal injury or damage to the device. A scraper may be used, but only when the blender is not running.
• To reduce the risk of injury, make sure the blade base is securely screwed onto the cup before placing it on the motor base and operating the appliance.
• Do not use NutriBullet Rx outdoors.
• Do not blend hot liquids in sealed oversized or short NutriBullet cups.

EXTRACTING SMOOTHIES

NutriBullet Rx is programmed to run for 1 minute during smoothie mode (G-button will be green).

• If the motor base does not shut off after 1 minute during the smoothie cycle, stop it manually by depressing the blue illuminated power button, located 90˚ to the left side of the G-Button, or simply lift the cup off the motor base.
• To turn off the machine at any time during the smoothie cycle (G-Button will be green), depress the power button, located 90˚ to the left side of the G-Button, or simply lift the cup off the motor base. If you press the G-Button for 2 seconds during extraction and the light turns orange, you are in souperblaster mode.
  • WARNING: Never use sealed cups in souperblaster mode! Depress the power button, located 90˚ to the left side of the G-Button, and simply lift the cup off the motor base to turn off the unit. The light will stop glowing, signifying power is off. Always unplug the motor base upon completion of processing.
• Do not touch the coupling gear directly with your hands after smoothie mode! The coupling gear in the blade base and motor base will be hot!
• Do not run in smoothie mode for more than 1 interval.
• After the initial cycle, allow the motor base to shut off completely and wait for 15 seconds before starting another cycle.
• Do not run for more than 3 consecutive 1-minute intervals without allowing the motor base to cool to prevent overheating and allow ingredients to settle for 2-3 minutes after the 3rd extraction cycle.
• The motor base is equipped with an internal thermal breaker that shuts off the motor base if the unit overheats.
• If the motor base overheats and shuts off, unplug the motor base and press the blue illuminated power button, located 90˚ to the left of the G-Button, and let it cool for an hour or more before attempting to use it again. The motor base will reset when the unit is powered off and the thermal breaker has cooled down sufficiently.
• When making nut butters or oil-based foods, due to the consistency, the food will process and then stick to the sides of the pitcher. Process in 30-second increments only by simply lifting the pitcher off the motor base between intervals. Between cycles, open the pitcher as needed to scrape down the ingredients to the center of the pitcher before continuing to process in 30-second increments.
• Allow the machine to cool down for 10 minutes after 4-5 cycles to prevent overheating and damaging the unit.
• To prevent leakage, always align and hand-tighten or use the blade remover to tighten the blade to the NutriBullet® Rx cup prior to inverting it and placing the assembly onto the motor base.
• To turn on the NutriBullet®: plug the motor base into an electrical outlet. Press the power button, located 90˚ to the left side of the G-Button. This will cause the power button to glow blue. Next, place the cup blade-side down onto the motor base. This will activate the NutriBullet® Rx’s smart technology function, causing the G-Button at the front of the unit to glow green.
• Once activated, the unit will run for 1 minute in regular smoothie mode before it automatically turns off. The G-Button will stop glowing green at the end of the 1-minute cycle. To turn off completely before the cycle is complete, either lift the cup off of the base or press the power button, located 90° to the left side of the G-Button. The power button will extend from its recessed position and the blue light will no longer be lit, signifying the power is off.
• In smoothie mode, the motor will run 2 cycles during the 1-minute interval—first it will slow down halfway through the 1-minute interval to allow the ingredients to settle for improved processing, then it will power up again for the second half of the interval. This is a normal function of the NutriBullet Rx.
• Turn the NutriBullet Rx off after each use. Depress the power button, located 90˚ to the left side of the G-Button. The blue light will stop glowing, signifying power is off.

POWER OFF INSTRUCTIONS

1. To turn off the machine at any time during the smoothie cycle (indicated by the green glowing G-Button), depress the power button, located 90° to the left side of the G-Button, and simply lift the cup off the motor base. When the vessel is removed from the motor base, only the green G-Button light will turn off. When the power off button is pressed, the blue light will turn off and the blade will stop spinning. 
2. To turn off the machine at any time during souperblast mode (indicated by the orange glowing G-Button), press the power off button, located 90˚ to the left side of the G-Button, and simply lift the souperblast pitcher off the motor base. When the vessel is removed from the motor base, only the orange G-Button light will turn off. When the power off button is pressed, the blue light will turn off and the blade will stop spinning. 
3. Always press the power off button when the machine is not in use.

SAFETY WARNINGS FOR EXTRACTING FOR SOUP

Warning!: Only use the vented souperblast pitcher and two-piece lid while operating the NutriBullet® Rx in souperblast mode. The souperblast pitcher is specially vented to release pressure as the soup mixture heats. Other vessels are unvented and may rupture and cause personal injury if misused in souperblast mode.

• To prevent overheating: do not repeat souperblast mode for the same hot soup. If more heat is required, place the contents in a microwave-safe container and continue heating to the desired temperature. To make a new soup, empty old contents, add new ingredients and wait 1 full minute before returning the vessel to the motor base to start a new smart technology cycle. Do not repeat more than 2 cycles in souperblast mode, resting 1 minute between cycles.
• Do not run the NutriBullet Rx in souperblast mode for more than 2 cycles consecutively without allowing the NutriBullet Rx motor base and souperblast accessories to cool off for 30-60 min. To prevent overheating and allow ingredients to settle before continuing to blend.
• If the motor base does not shut off after one (1) 7-minute interval during souperblast mode, depress the power button, located 90° to the left side of the G-Button, or simply lift the souperblast pitcher off of the motor base.
• Allow the motor base to shut off completely after the initial interval and wait for 3-4 minutes between intervals.
• The motor base is equipped with an internal thermal breaker that shuts off the motor base when the unit overheats. If the motor base overheats and shuts off, unplug the motor base or press the power button, located 90° to the left of the G-Button, and let it cool for an hour or more before attempting to use it again. The motor base will reset when the unit is powered off and the thermal breaker has cooled down sufficiently.

HEAT CAUTIONS

• During souperblast mode, the contents inside can reach up to about 70°C / 150°F through the friction of the rotating blade.
• Keep hands and other exposed skin away from the lid opening to prevent possible burns during souperblast mode.
• Do not remove the lid during the processing of soup—ingredients will become hot and may splash out and cause injury.
• Do not touch the souperblast pitcher directly with your hands after souperblast mode! The souperblast pitcher surface, blades, and coupling gear will be hot!
• Always use appropriate heat-resistant pads on the handle to hold the souperblast pitcher and to support the bottom of the container.
• Carefully open the souperblast pitcher lid after souperblast mode, as escaping steam and moisture may cause scalding burns.
• Always attach the blade to the souperblast pitcher and hand tighten or use the blade remover to tighten the blade to prevent leakage prior to adding ingredients into the pitcher.
• Never use the extractor blade to blend without liquid as doing so may damage the blade or motor.
• Do not use the souperblast pitcher on the motor base without the black lid and clear vent top in place when running the NutriBullet Rx.
• To turn the NutriBullet® Rx on in souperblast mode using smart technology, plug the motor base into an electrical outlet. Press the power button, located 90˚ to the left side of the G-Button. The power button will glow blue, signifying the power is on. Next, place the cup blade-side down onto the motor base. This will activate the NutriBullet Rx’s smart technology function, causing the G-Button at the front of the unit to glow green.
• Press the green G-Button down for 2 seconds until it glows orange. This will indicate that souperblast mode has begun. The unit will run in souperblast mode for about 7 minutes before automatically turning off. Once off, simply lift the souperblast pitcher off of the motor base.
• The motor will run 3 cycles during the 7-minute program—it will slow down twice through the cycle to allow the ingredients to settle for improved processing then it will increase again for the next part of the cycle. This is a normal function of the NutriBullet Rx.
• The contents inside can reach up to about 70°C / 150°F through the friction of the rotating blade.
• If you wish to process your soup for less than the programmed time, you may simply lift off the souperblast pitcher or press the power button, located 90˚ to the left side of the G-Button.
• Always allow it to come to a complete stop prior to adding additional ingredients during the processing period.
• Always depress the power button when not in use. The blue light will stop glowing, signifying the power is off. With an internal thermal breaker that shuts off the motor base when the unit overheats. If the motor base overheats and shuts off, unplug the motor base and press the power button, located 90° to the left of the G-Button, and let it cool for an hour or more before attempting to use it again. The motor base will reset when the unit is powered off and the thermal breaker has cooled down sufficiently.

CLEANING SAFEGUARDS

• After making a smoothie or souperblast, the blade must be cleaned immediately.
• Always unplug the motor base and depress the power button prior to cleaning, assembling, or disassembling.
• Never submerge the motor base in water or place it in the dishwasher. Wipe off any debris inside the motor base immediately to keep it in good working order.
• Do not wash the blades in the dishwasher as elevated temperatures can damage gasket seals.
• Do not remove the rubber liner inside the motor base. To clean, unplug first, then wipe with a sponge moistened with warm water.
• The NutriBullet Rx cups can be washed in the dishwasher and should be washed on the top rack of the dishwasher using the normal (not sanitize) cycle.
• The NutriBullet Rx cups and blades should not be immersed in boiling water for any reason as this will warp the plastic and damage gaskets.
• Blades are sharp! Use care when cleaning blades to avoid injury! Rinse blades immediately after each use to prevent debris from drying and sticking to blade components. If necessary, use the included brush to loosen any debris around blades, gaskets, and blade housing threads with care.
• Handwash only with mild dish soap and warm water (not hot).
• Dry immediately.
• For tough debris, fill the cup ½ full with room temperature (not hot), mild soapy water. Then, simply twist on the blade, pop it on the base and give it a run for 30-45 seconds. Follow up with a thorough brushing.
• When washing blades, do not attempt to remove the gasket ring. Simply hand wash the blades in warm, mild soapy water. Attempted removal of the gasket may permanently damage the blade configuration and cause leakage. If in time a gasket becomes loose or damaged.

STUBBORN CLEANUP

If ingredients dry inside the NutriBulletRx cups or souperblast pitcher, make your cleanup a snap by filling the cup about 2/3 full with room temperature soapy water and screw on the extractor blade. If using the souperblast pitcher, put on lids. Place the cup assembly on the NutriBullet® Rx motor base for about 20-30 seconds. This will loosen the stuck ingredients, and with a light scrub and rinse in warm water, you’ll be all done.

CLEANING THE NUTRIBULLET RX MOTOR BASE

HERE’S HOW TO CLEAN IT UP

1. The most important thing is to UNPLUG the motor base before cleaning!
2. Use a damp rag to wipe down the inside and outside of the motor base.
   • NEVER SUBMERGE THE MOTOR BASE IN WATER OR PLACE IT IN THE DISHWASHER.
   • Never put your hands or utensils near the moving blade and never use your hands or utensils to press the activator buttons down while the motor base is plugged in.

HEAVY CLEANING

Should the inside of the base become sticky due to spillage, you may follow these additional cleaning instructions:

• UNPLUG the motor base and depress the power button BEFORE cleaning.
• Place the motor base on a dish towel to catch any liquid or debris.
• Create a diluted vinegar and water solution using 1 TBSP of vinegar and 2 TBSPs of warm water. Pour the solution into the motor base where the blade assembly would sit during normal use.
• Immediately use a dish brush to dislodge any debris and wipe it out with a damp cloth.
• The motor base is constructed with a drain tube to drain any liquid debris safely through to the dish towel without damaging the inside components.

Save these instructions!

Troubleshooting

If you're having trouble with your Nutribullet 900W Blender Smoothie Maker, here are some common problems and solutions:

• The blender isn't blending: Make sure that the blender is securely attached to the power base and that the extractor blades are properly attached to the blending cup. Also, check that the blender is plugged in and that the power switch is turned on.
• The blender is making strange noises: If the blender is making strange noises, turn it off and unplug it immediately. Check for any foreign objects that may have gotten stuck in the blender, and make sure that the extractor blades are not damaged or bent.
• The blender is leaking: If the blender is leaking, make sure that the blending cup is properly attached to the power base and that the extractor blades are securely in place. Also, check for any cracks or damage to the blending cup or lid.

NutriBullet Rx One-Year Warranty

NutriBullet, LLC and Capital Brands Distribution, LLC (“NutriBullet”) warrant this NutriBullet against defects in materials and workmanship for a period of one year from the date of original retail purchase. This limited warranty is valid only in the country in which the product is purchased and comes with the product at no extra charge, however, shipping and processing fees will be incurred for returns, replacements, and/or refunds.

Pros & Cons

Pros

• Powerful 900-watt motor
• Cyclonic action technology for efficient blending
• BPA-free plastic cups and lids
• Easy to use and clean
• Compact and lightweight design

Cons

• Not ideal for blending large quantities
• Can be loud when in use
• May not blend all ingredients equally
• No variable speed settings

Customer Reviews about Nutribullet 900W Blender Smoothie Maker

Customers love the Nutribullet 900W Blender Smoothie Maker for its powerful motor and easy-to-use design. Many reviewers note that it is great for making quick and nutritious smoothies, and that it is easy to clean and store. However, some customers have noted that it can be loud and may not blend all ingredients equally. Overall, the Nutribullet Smoothie Maker has received positive reviews and is a great option for anyone looking for a high-quality blender for making smoothies and other blended drinks.

Common Complaints

The most common complaints about the Nutribullet 900W Blender Smoothie Maker are that it can be loud, may not blend all ingredients equally, and that it is not ideal for blending large quantities. Some customers have also noted that the blender can be difficult to clean, especially around the extractor blades. However, these complaints are relatively minor and do not significantly impact the overall quality or performance of the blender.