Introduction

H5 Rechargeable Hair Clipper X-Master is a versatile and high-performance hair clipper that is perfect for those who want to achieve salon-quality results at home. With its powerful motor, long-lasting battery, and precision blades, the X-Master is ideal for all hair types and lengths. This rechargeable hair clipper is priced at around $50 to $60 and was launched in the market in 2021. Its ergonomic design and quiet operation make it a popular choice for both personal and professional use.

Product list contains

• Hair Clipper x1

• Power Base x1

• Power adapter x1

• Cleaning brush x1

• Trim Comb x8

H5 Rechargeable Hair Clipper X-Master List

Product parts

1. Blade

2. Micro Length Regulator

3. Rotation speed control

4. On Off

5. LCD screen

6. AC adapter

7. Oil Refill Reminder

8. Load Condition Display

9. Spinning Motor

10. Rotary motor

11. Remaining time

12. Current Micro Length

Accessories

Product specifications of H5 Rechargeable Hair Clipper X-Master

Recharge

• Connect the power base into the circuit.

• Connect the power adapter to the power base.

• Ensure the power is “off” and place the clipper on the power base and make “didi” sound.

• LCD screen light will blink to indicate that it is charging. (The hair clipper will activate recharging protection after fully charged. Turn off charging power, and protect the battery lifetime).

Notes

• The clipper can directly charge with the power base.

• The hair clipper can be operated with the cable when it is out of battery.

Charging Instructions

• Please charge the clipper at least 3 hours before using it for the first time.
  After 3 to 4 times, the battery capacity will reach its best conditions.

• The best temperature to operate the hair clipper is between room temperature 5°C to 40°C.

• The product will still maintain 80% of the battery capacity after 400 times the battery cycle.

Features

Chart for Micro Length regulator

Reminder Lubricant Oil Refill Features
When the hair clipping operation accumulate over 120 minutes, the “oil” ( ) symbol will blink and beep to remind you to clean the blade and refill the lubricant oil.

Burden Condition

When the burden is shown as the above picture, it is normal.

When the burden is shown as the above picture, the loading condition is higher, and need to is lubricant oil on the blade.

When the burden is shown in the above picture, the hair clipper will be beeping and warning the burden condition very higher than normal. Need to remove the blade for cleaning and refill the lubricant oil immediately.

H5 Rechargeable Hair Clipper X-Master Rotary Control Features

• The number displays the rotary times of hair clippers in each minute.

• Rotary frequency: 5000 – 7000 times in every minute.

• Rotary setting: Press “-” or “+” to adjust the rotary regulator to specific spin, and each adjustment is 500 spins apart.

  

Smart Rotary Features

• Hair clipper will remain the same speed as set.

• The highlight of this product is the rotary speed will not be affected when cutting a lot of hairs or thicker hair during operation. It will remain the same speed of the rotary; increasing the cutting process and cutting result.

Current Remaining Time Display

Display the current battery remaining time, the below times based on when the battery is fully charged.

Micro cutting Length Setting
Setting for 4 micro cutting lengths: 1.0mm, 1.3mm, 1.6mm,1.9mm.

Charging reminder

When the battery remains 20 minutes, the battery symbol will start blinking, and making a “didi” sound to remind you to recharge the clipper.

Description of H5 Rechargeable Hair Clipper X-Master

The Opove Rechargeable Hair Clipper X-Master is designed for easy and convenient use. Its precision blades can cut through all hair types with ease, including thick and curly hair. The clipper is also adjustable to 4 different lengths, giving you the flexibility to achieve your desired hairstyle. The X-Master is equipped with a powerful motor that delivers fast and smooth cutting, reducing the risk of pulling or snagging. Its rechargeable battery provides long-lasting power, making it perfect for travel or on-the-go use. The clipper is also cordless, giving you the freedom to move around while cutting your hair.

Installation and Detachment

1. Trim comb installation
   Press and pulls the trim comb into the clipper shown as picture 1. (Caution: locks clipper into place to prevent any movement or fall off)

   

2. Trim comb detachment
   Pull in the opposite direction of the installation and detach the trim comb shown in Picture 2

   

3. Blade detachment
   Press and use a thumb to slide off the blade.

4. Installation
   Press the blade and locked into its place until hearing a “click”.

Setup Guide

To set up the Opove Rechargeable Hair Clipper X-Master, follow these steps:

1. Charge the clipper for at least 4 hours before the first use.
2. Attach the desired guard to the clipper's blade to adjust the cutting length.
3. Turn on the clipper by pressing the power button.
4. Start cutting your hair by moving the clipper against the grain of your hair growth.
5. When you're done, turn off the clipper and clean it with a brush.

Cleaning and maintenance

• Use a brush to clean the hair between the inner cutter and the clipper. (Do not remove the blade spring, which may cause damage).

• Drop 1-2 lubricant oil on the blade (shown as the picture) after cleaning, and reinstall the blade back to the clipper.

• The blade could be rinsed with water after it detached, please keep it dry before refilling the lubricant or installation.

Attention

• Do not disassemble the product without the seller’s permission.

• Do not keep the clipper in a humid place or wash it directly with water.

• Product can only be wiped with wet cloth or with soap water for cleaning.

• Do not recharge the product when the room temperature is above 40°C or below 0°C.
  Notes
  Normally, the product will during recharging or operation.

Battery Removal

• Disconnect the clipper from the power adapter.

• Operate the item until out of battery.

• Unscrew the clipper (shown as picture) and remove the battery.

• Be careful the battery cannot be used after removal, the positive and negative pole may cause short-circuit.
  Notes
  The internal battery is a lithium battery. Please take out the battery before dispose the item. Use recovery and disposal of waste electrical guideline in order to protect the environment.

Troubleshooting

Here are some common problems and solutions for the Opove Rechargeable Hair Clipper X-Master:

• Problem: The clipper won't turn on.
  Solution: Make sure the clipper is fully charged or try charging it for a few more hours.
• Problem: The clipper is cutting unevenly.
  Solution: Make sure the guard is properly attached to the blade and that you're moving the clipper against the grain of your hair growth.

H5 Opove Rechargeable Hair Clipper X-Master Warranty

• The product was made under strict quality control and inspection.

• 30-day Unconditional Money back! 1-year warranty covers failures due to defects in materials or workmanship that occur during normal use. (Blade needs to buy)

Pros & Cons

Pros

• High-performance Japanese stainless steel blade
• Adjustable to 4 cutting lengths
• Powerful motor that delivers fast and smooth cutting
• Long-lasting rechargeable battery
• Cordless and lightweight design

Cons

• May be too expensive for some users
• The blade may need to be sharpened or replaced after a while

Customer Reviews

Customers who have purchased the H5 Opove Rechargeable Hair Clipper X-Master generally have positive things to say about it. They praise its powerful motor, long-lasting battery, and precision blades that can cut through all hair types with ease. Some users also appreciate its cordless and lightweight design, which makes it easy to use and transport. However, some users have criticized the clipper's high price point and the need to sharpen or replace the blades after a while.