Paravan Lancia Voyager User Manual

Content

Overview

The Lancia Voyager is a mobility-focused converted vehicle built around a lowered-floor layout, an accessible sliding-door and ramp system, and optional wheelchair restraint equipment. This guide is aimed at owners and operators who need a clear, practical explanation of the PARAVAN conversion and the main safety and operating points.

It is especially useful for drivers and passengers who rely on powered access features, manual emergency operation, or wheelchair securement inside the vehicle. The Lancia Voyager conversion combines convenience with specific handling rules that should be followed closely to protect the vehicle and its occupants.

Detailed Description

The vehicle’s conversion is centered on a lowered floor that runs from the rear seat area forward to the pedal zone, creating space for easier entry and wheelchair transport. A modified exhaust path routes through the floor assembly, and the spare wheel is stored inside the cabin behind the rear bench because the underbody layout is different from a standard vehicle.

The right sliding door and ramp can be operated electrically or, in an emergency, manually. The system may lower the vehicle suspension first, then open the sliding door and extend the ramp. Depending on the switch position, the suspension function can be disabled so the door and ramp still operate without lowering the vehicle.

Front seats with a quick-release lock may be fitted, allowing easier removal and reinstallation when needed. The wheelchair anchorage system uses permanent aluminum rails and a belt set to hold a wheelchair securely in place. The overall design of the Lancia Voyager conversion is intended to support independent boarding and safe transport with reduced physical effort.

Specifications

Model: Lancia Voyager PARAVAN conversion
Access system: right sliding door with ramp
Floor layout: lowered floor from rear bench to pedal area
Wheelchair restraint: aluminum rail system with belts
Spare wheel location: inside the vehicle behind the rear bench
Seat option: front seats with quick-release lock, if equipped
Electrical systems mentioned: suspension, ramp, sliding door, SPACE DRIVE fuses if equipped

Safety

Keep clear of the ramp path whenever the system is operating, because the ramp does not have an automatic stop-and-reverse feature. Never place hands, feet, or other objects where moving parts can trap or strike them.

Manual door and ramp use is intended only as an emergency function and can increase wear. If the underbody is damaged, the protective structure beneath the vehicle should be repaired without delay. Reduced ground clearance also means extra caution is needed on curbs, rough roads, and steep approach angles.

When changing fuses, use only the correct amperage to avoid electrical overload. If a replaced fuse fails again, the system should be checked for the underlying fault.

Before removing front seats, disconnect the electrical connection only after the ignition is switched off. When securing a wheelchair, make sure the restraint is locked correctly and that a headrest is installed.

Setup and Operation

Opening the sliding door and extending the ramp

Use the original Lancia remote to unlock the vehicle. Press button 1 on the PARAVAN remote to open the right sliding door, lower the vehicle if suspension support is active, and extend the ramp. If you do not want the vehicle to lower, switch the dashboard suspension control to position 0 before pressing button 1.

Suspension lowering only works when the dashboard switch is set to position I. The system can also be operated from rocker switches located on the dashboard and on the right B-pillar.

Manual emergency operation

If an electrical fault occurs, the sliding door and ramp can still be used manually. Open the door fully and leave it at the end stop, then use the supplied Allen key to release the ramp lock through the floor opening. Pull the ramp straight out by its handle until it reaches the rear end of travel. Only after full extension can the ramp be lowered to the ground.

To store the ramp, lift it by the handle, slide it back horizontally into its floor compartment, and secure it again with the Allen key. Manual operation should be used carefully because repeated emergency use can increase mechanical wear.

Electric door and ramp controls

The original Lancia remote can open the sliding door electrically by pressing the appropriate side button for more than one second. In this mode, the door can open without the ramp extending. The PARAVAN remote controls the ramp: button 1 extends it and button 2 retracts it.

Press button 1 again to stop the ramp at any position. Press it again within ten seconds to continue extending. To reverse direction, stop the motion, wait ten seconds, and then press button 2 to stow the ramp.

The overhead console also provides main control buttons for the sliding doors. The power on/off button must be set correctly, because the doors cannot be operated in the off mode.

Seat removal and installation

To remove quick-release front seats, pull the release handle on the right side of the seat base backward to its stop. Then move the seat back slightly, tilt it rearward, and roll it out of the vehicle. Reinstall the seats in reverse order and make sure the release grip is fully pushed forward so the seat locks securely.

Wheelchair securement

The wheelchair anchorage system uses front and rear belts attached to the aluminum rails in the vehicle floor. The forward belts clip into the front rail and attach to the wheelchair frame. The rear belts attach to the rear rail and are tightened with the tensioning mechanism before being locked in place.

If the wheelchair is not held firmly, reopen the tensioning lock and retighten the belt. The system also includes an optional seat-belt stalk for use with the original three-point belt when specified.

Fuse access

The suspension and ramp fuses are located in the trunk on the left side, behind a plastic cover and the yellow fuse-box cover. SPACE DRIVE fuses, when fitted, are located in the passenger compartment center console and in the motor compartment.

Cleaning and Maintenance

No dedicated cleaning routine is specified in the manual excerpts, but the conversion does call for basic care of the ramp, seat locks, wheelchair belts, and accessible floor components. Keep the ramp compartment clear, secure the ramp properly after use, and inspect visible parts for unusual wear or damage.

Because the lowered chassis and rerouted exhaust reduce clearance underneath, the underside should be treated carefully during everyday driving and after any contact with obstacles. If the bottom protection is damaged, it should be repaired promptly.

Troubleshooting

If the powered door or ramp does not respond, check whether the suspension switch position is set correctly and whether the system power is on. If electrical operation fails, the manual procedure allows the door and ramp to be used as an emergency backup.

If a fuse fails repeatedly after replacement, the fault is likely elsewhere in the system and should be investigated rather than replacing fuses continuously. If the wheelchair does not feel stable after tie-down, retension the rear belts and confirm that the frame and headrest are properly supported.

Pros & Cons

Pros: Lowered-floor conversion improves accessibility and makes wheelchair boarding easier.
Pros: Electric and manual operation give the Lancia Voyager flexibility if a fault occurs.
Pros: Dedicated wheelchair anchorage rails support secure transport.
Pros: Quick-release front seats add versatility when cargo or wheelchair space is needed.
Cons: Reduced ground clearance requires careful driving and obstacle awareness.
Cons: The ramp must be handled correctly because it lacks automatic stop-and-reverse protection.
Cons: Manual emergency use and frequent misuse can increase wear on moving parts.

PDF

Faqs

How do I open the sliding door and deploy the ramp on a Lancia Voyager with PARAVAN conversion?

Use the original Lancia remote to unlock the vehicle, then press button 1 on the PARAVAN remote to open the right sliding door, lower the vehicle if that function is enabled, and extend the ramp. You can also use the rocker switches in the dashboard or right B-pillar. If you only want the door to open without lowering the suspension, set the dashboard suspension switch to position 0 before pressing button 1.

What should I do if the sliding door and ramp stop working electrically on the Lancia Voyager?

If the electric system fails, the sliding door and ramp can still be operated manually as an emergency function. Open the door fully to its end stop, then use the supplied Allen key to unlock the ramp from the floor compartment. Pull the ramp out horizontally by its handle until it reaches the rear end, then lower it to the ground. Because this is an emergency method, it may increase wear, so it should only be used when necessary.

How do I close and stow the ramp correctly before shutting the sliding door?

To stow the ramp, lift it by the handle and push it back horizontally into the floor compartment. After it is fully seated, secure it with the Allen key so it is locked in place. The sliding door should only be closed after the ramp has been properly stored. If the ramp is not locked correctly, the door should not be forced closed, because this can damage the mechanism and create a safety risk.

What safety rules should I follow when using the PARAVAN ramp and sliding door?

Keep all people, hands, feet, and loose items clear of the ramp path during operation. The ramp does not have an automatic stop or reversal function, so it will not detect an obstruction and reverse by itself. Never place any part of your body in the moving area. Before operating the system, make sure the surrounding space is open enough for the ramp and vehicle lowering function to move safely.

Why does the Lancia Voyager conversion require extra care when driving over curbs or uneven roads?

The conversion uses a lowered floor, which reduces ground clearance compared with a standard vehicle. The exhaust system is also routed through the floor assembly, so the underside needs more protection from bumps, curbs, and rough ground. Drive carefully and make sure there is enough clearance underneath the vehicle. If the underside is damaged, the bottom protection should be repaired immediately to avoid further problems.

Where is the spare wheel located in the PARAVAN Lancia Voyager?

Because of the lowered floor design and rear-positioned fuel tank, the spare wheel is stored inside the vehicle behind the rear bench seat. This is different from many standard vehicles, so it is useful to check the location before you need it. The manual also recommends carrying an emergency tire-filler foam kit, since it can help in situations where a full wheel change is difficult.

How are the front seats removed and reinstalled if my Lancia Voyager has quick-release seats?

To remove a seat, first switch off the ignition and disconnect the electrical connection. Then pull the release handle on the right side of the seat console fully backward, pull the seat back slightly, and tilt it toward the rear so it can roll out. When reinstalling, reverse the process and make sure the release grip is pushed all the way to the front. That final step is essential for locking the seat securely.

How do I secure a wheelchair using the PARAVAN anchorage system in the Lancia Voyager?

The wheelchair anchorage system uses aluminium rails and belts positioned in the vehicle floor area. Attach the front belts to the front rail and fasten them to the wheelchair frame. Then connect the rear belts to the rear rail, attach them to the wheelchair frame, and tighten them with the tensioning lock. Check that the wheelchair is fixed firmly and that a headrest is installed before driving.