logo

How to Use: Project Ev Single Phase AC Charger EVA-07S-PE-RFID-C User Manual

Content

Project EV Single Phase AC Charger EVA-07S-PE-RFID-C Review and Product Manual

The project ev Single Phase AC Charger EVA-07S-PE-RFID-C is a 7.3kW tethered home EV charger designed for single-phase installations, making it a strong fit for domestic driveways, garages, and small commercial parking spaces. It combines RFID access control, a compact wall-mounted design, and a 5-meter Type 2 tethered cable for convenient daily charging. With a 32A output, IP65 weather resistance, and solar compatibility, this smart EV charger is built for reliable outdoor use in the UK climate.

One of its standout benefits is flexibility. Drivers can use plug-and-charge mode, RFID card authentication, or app-based control, depending on the installation and configuration. This makes the Project EV EVA-07S-PE-RFID-C especially appealing for households that want controlled access, shared charging points, or scheduled off-peak charging to reduce electricity costs. The integrated cable locking system also adds security and convenience by keeping the charger and cable safely tethered when not in use.

The target audience includes EV owners looking for a dependable residential charger, installers serving single-phase properties, and businesses wanting a compact RFID-enabled charging solution. Typical pricing appears to fall in the mid-range for smart home chargers, with common retail listings around £540 to £650 including VAT, depending on supplier and stock levels. Availability is generally good through UK electrical wholesalers and EV specialist retailers, though pricing can vary by region, installation package, and accessories.

How to Set Up the Project EV EVA-07S-PE-RFID-C

Installation should always be carried out by a qualified electrician or EV charger installer. First, confirm that your property has a suitable single-phase 230V supply and adequate spare capacity for a 32A load. Next, choose a wall or post mounting position with enough clearance for the tethered cable and vehicle access. The charger is IP65 rated, so it is suitable for outdoor mounting, but it should still be positioned to reduce direct impact and water exposure where possible.

After physical mounting, connect the electrical supply according to the manufacturer’s wiring requirements and local regulations. Once powered on, configure the charging mode, Wi-Fi connection if available, and RFID access settings through the supported control interface or app. Pair the charger with any authorized RFID cards, then test a short charging session to confirm correct operation. If the charger does not respond, check the supply breaker, isolation switch, and network connection, and verify that the RFID card has been registered correctly.

Safety precautions are essential. Never open the unit while energized, and never use the charger if the cable, connector, or enclosure shows visible damage. Ensure proper earthing, surge protection, and cable management during installation. If you are unsure about load balancing, smart scheduling, or solar integration, consult the installer before commissioning the unit.

Pros and Cons of the Project EV 7.3kW RFID Home Charger

Pros

  • 7.3kW single-phase output is ideal for overnight home charging and daily commuting.
  • RFID access control is useful for shared driveways, employee parking, or restricted-use installations.
  • Tethered Type 2 cable improves convenience because there is no need to store a separate lead.
  • IP65 protection and wide temperature tolerance make it suitable for outdoor mounting in harsh weather.
  • Five-year warranty adds confidence and improves long-term value for money.
  • Solar compatibility and time-shifting features appeal to users aiming to reduce charging costs.

Cons

  • Single-phase charging means it is not as fast as many three-phase 11kW or 22kW alternatives.
  • Tethered design can be less flexible than untethered chargers if multiple connector types are needed.
  • Advanced features may require app setup or installer configuration, which can feel complex for first-time buyers.
  • Pricing is competitive, but some untethered models cost less if RFID access is not required.
  • For users with larger EV batteries or high-mileage driving, a faster three-phase charger may be a better alternative.

Overall, the project ev Single Phase AC Charger EVA-07S-PE-RFID-C offers strong value for homeowners who want security, smart control, and a neat tethered setup rather than maximum charging speed.

Customer Reviews of the Project EV EVA-07S-PE-RFID-C

Customer feedback is generally positive, with many users praising the compact design, easy daily use, and reliable RFID access. Typical star ratings from retailer listings and installer feedback trend around 4 to 5 stars, especially from buyers who wanted a secure home charger with a tidy installed look.

Common praise includes the useful tethered cable, solid outdoor build quality, and the convenience of scheduled charging for cheaper electricity tariffs. One frequent comment is that the charger feels like a premium residential unit without reaching the price of some high-end smart chargers.

Common complaints focus on installation cost, app setup complexity, and the fact that single-phase output is not the fastest option available. A typical testimonial might read: “Great charger for home use, simple RFID access, and very neat on the wall.” Another might say: “Works well, but make sure your electrician confirms the best configuration before fitting.”

Purchase recommendation: this charger is best for UK homeowners who want a dependable, weatherproof, RFID-enabled wall charger with strong everyday usability rather than ultra-fast charging performance.

PDF

Faqs

How do I set up the project ev Single Phase AC Charger EVA-07S-PE-RFID-C for first-time use?

Start by confirming the charger is installed by a qualified electrician and connected to a suitable single-phase supply. Before charging, check the wall mounting, cable condition, and indicator lights. If RFID access is enabled, register your card or tag in the charger’s access system first. Then connect the EV charging cable securely and test a short charging session to verify power delivery, status feedback, and safe shutdown.

What should I check if the project ev Single Phase AC Charger EVA-07S-PE-RFID-C is not charging my EV?

First, confirm the vehicle, plug, and charger are fully connected and that the RFID authorization step has been completed if required. Next, look for fault indicators on the unit and verify the home circuit breaker has not tripped. Also check whether the EV has scheduled charging or a battery limit set in its app. If the charger still will not start, try another RFID card or restart the unit.

Which EVs are compatible with the project ev Single Phase AC Charger EVA-07S-PE-RFID-C?

This charger is designed for EVs that support AC charging through a compatible connector and single-phase input. Compatibility depends on the vehicle’s onboard charger, charging port type, and accepted amperage. Before installation, verify the plug standard, charging power limits, and whether your EV supports RFID-based charging authorization. If your vehicle has app-based charging controls, make sure they do not conflict with the charger’s access settings.

How does RFID access work on the project ev Single Phase AC Charger EVA-07S-PE-RFID-C?

RFID access allows only approved users to start charging. You typically tap a registered card or tag on the reader, and the charger verifies permission before enabling power. This is useful for shared parking, fleet use, or private installations where access control matters. If a card is not recognized, re-register it in the system, keep the tag close to the reader, and avoid interference from metal cases or thick wallets.

Why does the project ev Single Phase AC Charger EVA-07S-PE-RFID-C stop mid-session?

A charging session can stop because of vehicle-side limits, overheating protection, power interruptions, or an RFID authorization timeout. Check whether the EV reached its charge target, whether the connector loosened, or whether the home electrical circuit was overloaded. Some vehicles also pause charging during battery management cycles. If the issue repeats, review the charger status lights, reduce concurrent household loads, and inspect the cable and plug for wear.

How can I optimize charging speed with the project ev Single Phase AC Charger EVA-07S-PE-RFID-C?

To get the best performance, make sure the charger is set to the correct current for your electrical installation and vehicle limits. Use a short, undamaged charging cable and avoid adapters that can reduce efficiency. Keep the charger on a dedicated circuit when possible, and minimize other high-power appliances on the same line. Also check that your EV’s settings are not limiting AC charging speed or scheduling delayed charging.

What maintenance does the project ev Single Phase AC Charger EVA-07S-PE-RFID-C need?

Regular maintenance should include checking the enclosure, connector, and cable for cracks, corrosion, or loose fit. Wipe the unit with a dry or slightly damp cloth and avoid harsh chemicals. Inspect the RFID reader area so it stays clean and responsive. It is also wise to test indicator lights and charging behavior periodically. If the unit is installed outdoors, confirm that seals and cable management remain intact after rain or temperature changes.

What are the most common installation mistakes with the project ev Single Phase AC Charger EVA-07S-PE-RFID-C?

Common mistakes include using an undersized circuit, poor grounding, incorrect breaker selection, and mounting the charger in a location exposed to water or impact. Another frequent issue is failing to configure RFID permissions before first use. Always confirm the electrical rating matches the site capacity and follow local code requirements. A professional installation helps prevent overheating, nuisance trips, weak connections, and long-term reliability problems.

Portable Automatic Ice Maker

Electric Knife 74250R

Leave a Comment