Setup: Pure It Classic G2 Mineral ROMF ROUV User Manual

Content

Ensure it Classic G2 Mineral ROMF ROUV Water Purifier

pure it Classic G2 Mineral ROMF ROUV Water Purifier-PRODUCT

Introduction

The pure it Classic G2 Mineral ROMF ROUV is an advanced water purification system designed to deliver safe, mineral-enriched drinking water for everyday use. Combining Reverse Osmosis (RO) with Micro Filtration (MF) technology, it ensures thorough removal of contaminants such as bacteria, viruses, heavy metals, and chemical impurities. Enhanced with a special mineral cartridge, this water purifier replenishes essential minerals like calcium and magnesium, promoting healthier hydration.

This purifier is ideal for families and individuals seeking reliable, high-quality water purification at home or in small offices. Its compact, space-saving design fits perfectly in kitchens, and the 6-litre storage tank guarantees access to purified water throughout the day, even during power outages. With user-friendly smart alerts and auto shut-off features, it offers convenient maintenance and safety assurance.

The pure it Classic G2 Mineral ROMF ROUV is competitively priced approximately in the mid-range segment, making it accessible while offering premium purification technology. It is widely available through authorized retailers and online stores, with installation and customer support services readily provided.

Specifications of pure it Classic G2 Mineral ROMF ROUV Water Purifier

  • Purification Technology: 6-stage process including Pre-Sediment Filter, Pre-RO Carbon Filter, Mini Filter, Thin Film Composite Spiral Wound RO Membrane, Micro Filtration Membrane or UV, and Post-RO Carbon Filter
  • Water Storage Capacity: 6 litres
  • Flow Rate: Up to 20 litres per hour
  • Power Consumption: 55 watts maximum
  • Input Voltage: 100-240 V AC, 50 Hz
  • Dimensions (H x W x D): 43.5 cm x 19.9 cm x 29.7 cm
  • Weight: Approximately 7.3 kg
  • Water Source Compatibility: Municipal tap water, borewell water, suitable for Total Dissolved Solids (TDS) up to 2000 ppm
  • Material: Food-grade engineered plastic tank and body
  • Special Features: Mineral fortification with calcium & magnesium, Advanced Alert system for filter expiry, Auto Shut Off to prevent unfiltered water dispensing
  • Installation: Under-sink or wall-mounted options available

Compared to similar products, the Pure Itt Classic G2 offers higher purification stages and mineral enrichment, outclassing many standard RO purifiers that lack mineral cartridges or smart alert systems.

KNOW YOUR PUREIT CLASSIC G2 PURIFIER

pure it Classic G2 Mineral ROMF ROUV Water Purifier-PRODUCT-A-
  1. LED Indicator
  2. Tap
  3. Waste Water Tube
  4. Compound ESF Outlet Tube
  5. Water Level Indicator
  6. Compound ESF
  7. ESF Inlet Tube
  8. Diverter
  9. Ball Valve

PUREIT CLASSIC G2 PURIFIER'S ADVANCED PURIFICATION PROCESS

pure it Classic G2 Mineral ROMF ROUV Water Purifier-PRODUCT-B
  1. Pre-Sediment Filter
    Removes visible dirt and impurities.
  2. Pre RO Carbon Filter
    Removes chlorine, harmful pesticides, bad taste,, and odour-causing organic compounds.
  3. Post Carbon Sediment Filter
    Removes any remaining impurities and dirt.
  4. RO Membrane
    Removes dissolved salts, hardness, pesticides, and heavy metals like arsenic, lead,,d and mercury, microbial contaminants like bacteriviruses, protozoa, and cysts.
  5. UV Chamber^
    An additional stage of purification that destroys bacteria, viruses,, and parasites.
  6. Micro Filtration (MF) Membrane^
    An additional stage of purification to further purify water.
  7. Post RO Carbon Filter
    Acts as a polisher and enhances the taste of purified water.

INSTALLING YOUR PUREIT CLASSIC G2 PURIFIER

  1. The purifier should be installed by a trained Pureit technician.
  2. It can be wall-mounted or used as a tabletop purifier.
  3. The purifier should be placed in an area that is free of ants/insects/other pests.
  4. The purifier should be placed close to the plumbed inlet connection (not more than 2 metres).
  5. Do not install the purifier above any electric socket.
  6. Avoid sharp bends in the pipes of the product.
  7. Do not use an extension cord.
  8. Before installing the purifier, please check the inlet pressure.
  9. Make sure you test the input water TDS (Total dissolved salts) before installing the purifier. The maximum input TDS should not exceed 2000 PPM.
  10. Do not connect the purifier to any hot water tap.
  11. Please do not terminate the reject line tubing directly into the drainage (keep it hanging over the drainage).
  12. Do not place the unit where it will be exposed to freezing and/or direct sunlight,, and ensure there is enough ventilation.

TAKING CARE OF YOUR PUREIT CLASSIC G2 PURIFIER

Cleaning

  1. Clean the tap nozzle using disinfectants like bleach/hypochlorite (50 PPM available chlorine). Discard 2 litres of water after cleaning the dispenser.
  2. Clean the external portion of the purifier using a dry cloth only. Do not use any detergent or soap.
  3. Do not clean aggressively or rub the surface, as this might lead to scratches on the parts.
  4. Never splash water on the purifier while cleaning.
  5. Do not try to open the purifier for cleaning or for any replacements. This can be done only by a qualified company personnel or an authorised agent.
  6. You should maintain good hygiene in the area around your water purifier. Ensure that this area is free of ants/insects/other pests.
  7. Do take care of the reject line and other tubes while cleaning the purifier else water can flow into the kitchen.

Storage Tank

  1. Discard the water in the Storage Tank once in 15 days through the tap.
  2. Always drain the water in the Storage Tank if you have not used the purifier for more than 2 days.
  3. Do not allow any foreign or unexpected material (like dust/ants/insects/other pests) to enter into the storage tank. The filtered water in the storage tank may deteriorate in the process.

PUREIT CLASSIC G2 MINERAL RO+MF / RO+UV*’ WARRANTY DETAILS

Product Warranty

The ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ guarantees that you will get ‘As safe as boiled water’ as described in ‘Pureit Classic G2 Mineral RO+MF / RO+UV* Unique Technology’ section, as long as the ‘Pureit.t

Classic G2 Mineral RO+MF / RO+UV*’ is used in the manner specified in the user manual.

  1. The Consumables, including the Pre-Sediment Filter,pre-RO carbon Filter, Post-Carbon Sediment Filter, Mini Filter, RO Membrane, Micro Filtration Membrane (in case of Pureit Classic G2 Mineral RO+MF), and
    Post-RO Carbon Filter will not be covered under warranty.
  2. The warranty does not cover the external booster pump, pressure reducing valve,, which is bought as an accessory to the purifier.
  3. All other components, including the electrical parts,, will have a 12-month warranty against the manufacturing defects.

This warranty is subject to the following conditions:

  • The customer will register with the company at the time of purchase by calling Pureit Call Centre and getting the purifier installed through the company’s service technician.
  • Inspection and test report of the company’s office/service centre/authorised dealer will be final and binding under the warranty for determining defects, repairs/alterations required or carried out, or certifying the working of the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ thereafter.
  • The company’s obligation under this warranty shall be limited to repairing or providing replacement of parts, which are found to be defective. The company or its authorised customer care centre/licensed service provider reserves the right to retain any part(s) or component(s) replaced at its discretion, in the event of a defect being noticed in the equipment during the warranty period.
  • The company’s liability under this warranty shall in no event, and under no circumstances, exceed the price paid by the customer.
  • This warranty is confined to the first purchaser of the product only and is not transferable.
  • In the event of repairs of any part/s of the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’, this warranty will thereafter continue and remain in force only for the unexpired period of the warranty. The warranty is issued at Mumbai, and courts at Mumbai shall have exclusive jurisdiction over matters covered or arisingor arising from this warranty.
  • The company's obligation is only for effective repairs of any defective part of the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’, and not for ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ replacement as such.
  • Repairs or replacements will be carried out either by the dealer from whom the device has been purchased or through a company’s Customer Care Centre, or the Authorised Licensed service provider with whom the device has been registered.
  • For units installed beyond the municipal limits of the jurisdiction of the Authorised Licensed service provider or company’s Customer Care Centre, all expenses incurred in collecting the device(s) for part(s) thereof from the company’s Customer Care
  • Centre or Licensed Service Centre, as well as expenses incurred in deputing of service personnel/technicians towards conveyance with other incidentals, etc,,. Will be borne by the customer.
  • The warranty is void if any repair work is carried out by persons other than those of the company, or its authorised dealers.
  • Any part(s) of the electrical and purifier system replaced by the company at its discretion shall be with a functionally operative part.
  • The concerned Customer Care Centre or Licensed service provider will advise the customer whether to effect the repair at the site or at the Customer Care Centre.
  • Warranty does not cover accessories external to the equipment supplied by the dealer. In case of repairs or replacement of any part/s of the unit, this warranty will thereafter continue and remain in force only for the unexpired period of the warranty.
  • Replacement of parts would be purely at the discretion of HUL.. The same part model shall be replaced,, and in the event such part model has been discontinued, it shall be replaced with the part model of price equivalent at the time of purchase.

PUREIT CLASSIC G2 MINERAL RO+MF / RO+UV*WARRANTY DETAILS

In case of any damage to the product/customer abuse/repairs by unauthorised personnel/misuse detected by the authorised service centre personnel, the warranty conditions are not applicable , and repairs will be done subject to the availability of parts and on a chargeable basis only.

This warranty shall not cover any consequential or resulting liability, damage, or loss to property or life arising directly or indirectly out of any defect in the water purifier. The company’s obligation under this warranty shall be limited to repair or providing replacement of defective parts only under the warranty period.

The warranty is not applicable in any of the following cases:

  1. The completed warranty card is not presented to authorised service personnel at the time of service of the product.
  2. The product is not operated according to the instructions given in the operating instruction booklet.
  3. The device is not installed according to the proper procedure specified.
  4. Any defect caused by an improper electrical circuit outside the device in the house, or by any defective electrical supply.
  5. Defects are caused by improper or reckless use, which shall be determined by the company personnel.
  6. Any repair work is carried out by the persons other than authorised service personnel.
  7. The damages caused by due to transportation or shifting are not covered by warranty.
  8. Defects are due to causes beyond control like lightning, abnormal voltage, acts of god, or while in transit,, or service center, er or purchaser's residence. (normal voltage range specified 230V +/-10% with 50 Hz). Customer shall ensure that a stabilizer is installed in those areas where voltage is not available within the warranty range (230V +/- 10%). The stabilizer should be from a reputable manufacturer.
  9. The warranty will automatically terminate after 12 months of expiry of the warranty period, even though the device may not be in use for any time during the warranty period for any reason.
  10. Only courts in Mumbai will have the jurisdiction for settling any claims.
  11. The serial number of the device or any part thereof is damaged, defaced, altered, obliterated, or tampered with, or removed for any reason whatsoever.
    This warranty is valid in India only.
    Notwithstanding anything to the contrary contained in, or implied by this warranty: The company’s liability under this warranty shall be limited only to defects in the ‘Pureit Classic G2 Mineral RO+MF /
    RO+UV*’ which occur under the conditions of normal operation of the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ and their proper and prescribed use as per this user manual. This warranty does not cover or extend to defects which are determined by the company or its authorised agents as occurring or resulting from or attributable to negligence, abuse, misuse, faulty care, operation, or maintenance, or repairs, alterations to the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ or any part thereof by others.

General
For the purpose of this warranty, the following expressions shall have the following meanings respectively:

  • The ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ shall mean the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ described in the invoice.
  • The customer’ shall mean the purchaser of the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ from the company or the company’s authorised dealer who is a party to the invoice.
  • The company’ shall mean Hindustan Unilever Limited.
  • Invoice’ shall mean the Invoice issued for the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ by the company or its authorised dealer to the customer describing the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ and indicating, inter alia, the total purchase price thereof, the name of the customer, and the place where the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’ is to be delivered.
  • User manual’ shall mean the instructions for installation, use, and maintenance contained in the leaet published by the company, and available online to the Customer at the time of sale of the ‘Pureit Classic G2 Mineral RO+MF / RO+UV*’.
  • Visit the Pureit website for more detailed instructions on cleaning/maintenance of your purifier.
  • Warranty doesn’t cover any damage/other issue arising out of ingress of external/foreign material (like dust, insects, ants, other pests) in the water purifier,r as it is the responsibility of the consumer to keep the area around the purifier clean and free of pests/dust. st 

Troubleshooting pure it Classic G2 Mineral ROMF ROUV Water Purifier

  • Problem: No water output or slow flow
    Solution: Check input water pressure (should be above 10 psi), ensure the storage tank is not full, and clean or replace clogged pre-filters.
  • Problem: The Filter alert is beeping continuously
    Solution: Replace the filter cartridge as the system warns days before expiry; ignoring may cause auto shut-off.
  • Error Code: Solid red indicator
    Fix: This signals no input water supply or very low pressure; verify the water source and plumbing connections.
  • Preventive Measures: Keep purifier surroundings clean to avoid dust and pest ingress, maintain regular filter replacements, and ensure stable input voltage.

The purifier comes with a 1-year limited warranty covering manufacturing defects (excluding consumables like filters). For support, users can contact Pureit customer care via a24/77 WhatsApp helpline or call the toll-free number 1800-570-1000 for installation, servicing, and troubleshooting assistance.

Pros & Cons of pure it Classic G2 Mineral ROMF ROUV Water Purifier

  • Pros:
    • Advanced 6-stage purification ensures comprehensive removal of contaminants
    • Mineral cartridge adds essential calcium and magnesium for healthier water
    • High purification speed up to 20 litres/hour , suitable for families
    • Smart alert system for timely filter changes and safety auto shut-off
    • Compact design fits well in modern kitchens; multiple installation options
    • Wide input voltage range (100-240V) supports power fluctuation tolerance
  • Cons:
    • Storage capacity is limited to 6 litres, which may require frequent refills in larger households.
    • Higher power consumption (55W) compared to some non-RO purifiers
    • Filters and mineral cartridges require periodic replacement, adding to the maintenance cost
  • Value for Money: Considering the robust purification technology and mineral enrichment, it offers excellent value compared to basic RO or UV-only purifiers.

Customer Reviews and Feedback on pure it Classic G2 Mineral ROMF ROUV Water Purifier

Users consistently praise the pure it Classic G2 Mineral ROMF ROUV for its reliable purification and improved taste due to mineral fortification. Many highlight its smart alert system as a helpful feature that ensures timely maintenance, preventing water quality degradation. The compact design and ease of installation are commonly appreciated.

Common complaints include the need for regular filter replacement,,s which adds to the ongoing cost, and the relatively small 6-litre storage tank that may not suffice for larger families without frequent refills. Some users also note that the power consumption is higher than simpler purifiers.

Overall, the product enjoys a strong 4+ star rating across major retail platforms, with recommendations especially for health-conscious consumers looking for mineral-enriched RO purified water at home.

PDF

Faqs

How do I set up the pure it Classic G2 Mineral ROMF ROUV water purifier for the first time?

To set up the pure it Classic G2 Mineral ROMF ROUV, mount it on a wall or place it on a countertop near a water source. Connect the input water line ensuring the water supply has a TDS level below 2000 ppm. Plug it into a 100-240V AC outlet. Follow the user manual to flush the system before first use. Installation usually requires a professional for under-sink setups, and Pureit offers installation support and 24x7 customer assistance.

What should I do if the pure it Classic G2 Mineral ROMF ROUV stops dispensing water?

If your pure it Classic G2 Mineral ROMF ROUV stops dispensing water, first check if the storage tank is full or if the input water pressure is low (below 10 PSI). The purifier has an automatic shut-off if filters need changing; check the Advance Alert indicator. Ensure power supply is stable and the unit is switched on. Contact Pureit customer support or a certified technician if the issue persists.

What are the key purification features of the pure it Classic G2 Mineral ROMF ROUV?

The pure it Classic G2 Mineral ROMF ROUV uses an advanced 6-stage purification process that includes Pre-Sediment Filter, Pre-RO Carbon Filter, Reverse Osmosis Membrane, Micro Filtration Membrane or UV, and Post-RO Carbon Filter. It removes bacteria, viruses, heavy metals, and chemicals while adding essential minerals like calcium and magnesium for healthier water.

Can the pure it Classic G2 Mineral ROMF ROUV purifier work with both municipal and borewell water?

Yes, the pure it Classic G2 Mineral ROMF ROUV is compatible with multiple water sources, including municipal tap water and borewell water. It efficiently treats hard and soft water with TDS levels up to 2000 ppm, ensuring safe, mineral-enriched drinking water.

How can I optimize the purification performance of the pure it Classic G2 Mineral ROMF ROUV?

To optimize performance, maintain input water pressure between 10 to 30 PSI and keep the input water temperature between 10°C and 40°C. Regularly replace filters as alerted by the Advance Alert system, clean the water storage tank periodically, and ensure the unit is connected to a stable power source to ensure consistent purification.

How often should I replace the filters in the pure it Classic G2 Mineral ROMF ROUV water purifier?

Filters in the pure it Classic G2 Mineral ROMF ROUV should typically be replaced every 6000 liters or as indicated by the Advance Alert system, which warns 15 days before filter expiry. Timely replacement is crucial to maintain water purity, system efficiency, and to avoid automatic shut-off due to expired filters.

What maintenance steps are recommended to keep the pure it Classic G2 Mineral ROMF ROUV running smoothly?

Regularly clean the water storage tank with a mild detergent, ensure the purifier area is dust and pest-free, and monitor the Advance Alert indicators for filter replacement. Avoid exposure to direct sunlight and extreme temperatures. Scheduling professional servicing annually can help maintain optimal function and extend the purifier’s lifespan.

Does the pure it Classic G2 Mineral ROMF ROUV have any safety features to ensure water quality?

Yes, the pure it Classic G2 Mineral ROMF ROUV includes safety features such as an Advance Alert system that warns 15 days before filter expiry and an Auto Shut Off that stops water flow if the filter is not changed. This ensures you receive 100% RO purified, safe, and mineral-enriched water without contamination risks.

Foldable On-Ear Wireless Headphones

DGH78 Soothe & Glow Seahorse

Leave a Comment