Roborock Qrevo Plus Robotic Vacuum Cleaner R100037 User Manual

Content

Roborock Qrevo Plus Robotic Vacuum Cleaner R100037 Manual

The Roborock Qrevo Plus Robotic Vacuum Cleaner R100037 is an automated vacuum and mop designed to reduce daily floor-cleaning work in homes with hard floors, carpets, pets, and busy households. It combines LiDAR-based navigation, high-powered suction, rotating mop pads, automatic dirt collection, water management, and app-based scheduling in one integrated cleaning system.

With up to 7,000 Pa of suction power, the robot can collect dust, crumbs, hair, and debris from hard floors and carpet fibers. Its dual rotating mop pads help loosen dried marks, while adjustable water flow allows users to choose a suitable moisture level for different floor materials. The mop system can lift when carpet is detected, helping reduce unwanted moisture on carpeted surfaces.

The multifunction dock automatically recharges the robot, empties collected dust, refills the onboard water tank, washes the mop pads, and dries them with warm air. This makes the Qrevo Plus suitable for users who want less hands-on maintenance than a conventional robot vacuum.

Use the Roborock app to create maps, schedule cleanups, define rooms, set no-go zones, adjust suction and water levels, and monitor maintenance. The vacuum suits apartments, family homes, and pet-friendly spaces. It is especially useful for routine cleaning between deeper manual vacuuming sessions.

Roborock Qrevo Plus Specifications and Key Features

Model: Roborock Qrevo Plus R100037.
Cleaning functions: Robotic vacuuming, mopping, automatic charging, dust collection, mop washing, mop drying, and water refilling.
Maximum suction: Up to 7,000 Pa, depending on the selected cleaning mode and surface.
Mopping system: Dual rotating mop pads operating at up to 200 revolutions per minute.
Water adjustment: Up to 30 water-flow levels through compatible app settings.
Navigation: LiDAR mapping with room recognition, scheduling, cleaning zones, and virtual no-go areas.
Mop lifting: The mop modules can lift when carpet is detected, with lifting performance of up to approximately 7 mm in supported conditions.
Robot dimensions: Approximately 350 × 353 × 96.5 mm.
Battery: 14.4 V, 5,200 mAh typical lithium-ion battery.
Operating temperature: Use the robot between 4°C and 40°C.
Dock functions: Automatic dust emptying, water replenishment, mop washing, and warm-air mop drying.
Connectivity: Roborock mobile app and compatible home Wi-Fi network.

Actual runtime, cleaning coverage, and suction performance vary with floor type, selected mode, obstacles, temperature, and battery condition.

How to Set Up the Roborock Qrevo Plus R100037

Unpack the robot, multifunction dock, dock base, power cable, mop modules, and included consumables.
Attach the dock base securely and place the dock on a level, hard surface against a wall.
Leave clear space around the dock so the robot can leave and return without obstruction. Keep the approach free from cables, furniture, and loose objects.
Connect the power cable to the dock and a suitable wall outlet. Confirm that the dock indicator is active.
Fill the clean-water tank and install the dirty-water tank according to the tank markings. Do not add unapproved detergents or foaming liquids.
Attach the rotating mop modules, then place the robot on the dock to charge fully before its first complete cleaning cycle.
Install the Roborock app, sign in if required, and follow the pairing instructions. Enable the requested Bluetooth, location, and local-network permissions.
Connect the vacuum to the supported home Wi-Fi network, then create an initial map by opening doors and removing temporary obstacles.
Set room names, cleaning schedules, carpet preferences, suction strength, water flow, and restricted zones.

Keep hands, pets, and loose clothing away from moving brushes. Do not operate the robot on wet spills, use a damaged power cable, or immerse the robot or dock in water.

Roborock Qrevo Plus Troubleshooting Guide

Robot will not charge

Confirm that both ends of the power cable are connected and that the dock indicator is on. Reposition the robot so its charging contacts align with the dock contacts. Clean both sets of contacts with a dry cloth. Remove dust, stains, or oxidation before trying again.

Robot cannot find the dock

Move objects away from the dock and keep its approach open. Place the robot closer to the dock and start a return-to-dock command from the app. Avoid relocating the dock after mapping unless the map is updated or recreated.

Weak suction or poor pickup

Empty the dustbin or dock dust bag, clean the filter, and remove hair from the main brush, side brush, and wheels. Select a stronger suction mode for carpets, and check that the air path is not blocked.

Mops are not washing or drying

Check the clean-water level, dirty-water tank, mop modules, and dock power connection. Empty the dirty-water tank and clean the dock wash area. Do not interrupt a washing or drying cycle unless necessary.

Common alerts

Battery alerts usually require charging before use. Brush or wheel alerts require switching off the robot and removing trapped hair or debris. Temperature alerts require moving the robot to an environment between 4°C and 40°C.

If problems continue, restart the robot and consult the official Roborock Qrevo Plus support page or the user manual for region-specific instructions. Contact Roborock customer support through the support channel for the country where the product was purchased. Keep the model number, purchase documentation, and a description of the issue available for service or warranty assistance.

Pros and Cons of the Roborock Qrevo Plus R100037

Advantages

Strong everyday cleaning: Up to 7,000 Pa suction helps handle dust, crumbs, pet hair, and carpet debris.
Reduced maintenance: The multifunction dock automates dust emptying, mop washing, drying, and water refilling.
Flexible mopping: Rotating mop pads and adjustable water flow provide more control than basic drag-cloth robot vacuums.
Detailed navigation: LiDAR mapping supports room-by-room cleaning, schedules, no-go zones, and targeted zones.
Useful for mixed flooring: Carpet detection and mop lifting help separate vacuuming from wet cleaning.

Limitations

Dock space requirements: The multifunction station is larger than a standard charging dock and needs a clear installation area.
Regular upkeep remains necessary: Brushes, filters, tanks, sensors, and the dock wash area still require inspection and cleaning.
Not a complete replacement for deep cleaning: Stairs, upholstery, tight corners, and heavily soiled areas may still need a manual vacuum or mop.
Connectivity dependency: Mapping and advanced scheduling features depend on app setup and a compatible Wi-Fi environment.
Best suited to prepared floors: Cables, small objects, spills, and clutter can interrupt navigation or reduce cleaning quality.

The Roborock Qrevo Plus is a strong choice for households seeking automated vacuuming and mopping with minimal daily intervention. Users who need a compact dock, frequent stair cleaning, or entirely offline operation may prefer a simpler vacuum model.

PDF

Faqs

How do I set up the roborock Qrevo Plus Robotic Vacuum Cleaner R100037 for the first time?

Place the charging dock on a level floor against a wall, leaving clear space around its entrance and sides. Connect the dock to power, position the robot on the charging contacts, and wait until it begins charging. Install the Roborock app, sign in, and follow the prompts to add the Qrevo Plus. Start with a complete mapping run after removing loose cables, small objects, and obstacles from the floor.

Why is my roborock Qrevo Plus Robotic Vacuum Cleaner R100037 not charging?

First, confirm that the dock power cable is firmly connected and that the outlet works. Reposition the robot so its charging contacts align with the dock contacts. Inspect both sets of contacts for dust, stains, or oxidation, then wipe them with a dry cloth or lightly alcohol-moistened cloth. Keep the dock area unobstructed. If charging still fails, unplug the dock briefly, reconnect it, and restart the robot.

How can I improve cleaning performance on the roborock Qrevo Plus Robotic Vacuum Cleaner R100037?

Empty the dustbin regularly and clean the filter before restricted airflow reduces suction. Remove hair and thread from the main brush, side brush, wheels, and brush ends. Use the Roborock app to select suitable vacuum power, mopping intensity, room order, and cleaning schedules. Run an additional pass in high-traffic areas, and keep floors free of cables, clothing, and small objects that can block the robot.

What should I do if the roborock Qrevo Plus Robotic Vacuum Cleaner R100037 gets stuck or cannot find the dock?

Check whether wheels, brushes, or the mop assembly are caught on cables, thresholds, rugs, or furniture. Move objects that leave too little clearance and place the dock on a flat surface with an unobstructed approach. Clean the navigation and sensor areas, then return the robot to the dock and allow it to reposition. Updating the app or restarting the robot can also resolve temporary navigation problems.

Can I control the roborock Qrevo Plus Robotic Vacuum Cleaner R100037 with a smartphone or voice assistant?

The Roborock app is used for setup, mapping, room selection, schedules, cleaning modes, and maintenance alerts. Voice control may be available through supported smart-home platforms, depending on your region, app version, and account configuration. Add the robot in the Roborock app first, give it a distinct device name, and link the same account to the chosen voice assistant before creating commands such as starting or stopping cleaning.

Why is the roborock Qrevo Plus Robotic Vacuum Cleaner R100037 leaving wet or uneven mop marks?

Check that the mop components are installed evenly and that the dock has adequate clean water if the model is using its automatic washing function. Wash the mop pads and remove trapped debris, then inspect the floor for sticky residue that may cause streaking. Select a suitable water level in the app and avoid starting mopping on heavily soiled floors without first removing loose dirt.

How often should I maintain the roborock Qrevo Plus Robotic Vacuum Cleaner R100037?

Inspect the main brush, side brush, wheels, and sensors frequently, especially when cleaning homes with pets or long hair. Empty the dustbin as needed and clean the filter when airflow decreases or an alert appears; let a washable filter dry completely before reinstalling it. Clean mop pads and water components regularly, wipe charging contacts when dirty, and follow the app’s replacement reminders for consumable parts.

What should I do if the roborock Qrevo Plus Robotic Vacuum Cleaner R100037 makes unusual noise?

Stop cleaning and check the main brush, side brush, wheels, and brush mounting areas for hair, thread, or small objects. Remove the affected part according to the manual, clean both ends and its housing, and reinstall it securely. Also check that the dustbin, filter, mop assembly, and water components are seated correctly. If the noise continues after cleaning and restarting, stop using the robot and contact Roborock support.