Roborock QX Revo Robotic Vacuum Cleaner QXDPEA User Manual

Roborock QX Revo Robotic Vacuum Cleaner QXDPEA Manual

Introduction

The Roborock QX Revo Robotic Vacuum Cleaner QXDPEA is an automated vacuum-and-mop system designed to reduce everyday floor-cleaning work. It combines LiDAR-based navigation, powerful suction, rotating mop pads, automatic mop washing, mop drying, and hands-free dust collection in one integrated cleaning platform.

With up to 5,500 Pa of suction power, the robot can collect dust, crumbs, hair, and other common household debris from hard floors and carpets. Its rotating mop system helps loosen dried-on marks, while automatic mop lifting helps prevent wet cleaning on selected carpeted areas. The multifunction dock stores clean and dirty water, washes the mop pads, and supports automatic dust disposal.

The QX Revo is intended for apartments, houses, offices, and other indoor spaces with hard flooring or a combination of hard floors and low-pile carpets. It is especially useful for households that want scheduled cleaning, app control, room-by-room routines, and reduced manual maintenance.

Before operation, install the Roborock app, connect the robot to a compatible 2.4 GHz Wi-Fi network, and place the dock on a stable, level surface. Remove loose cables, small objects, and fragile items from the cleaning area. The robot is not a replacement for occasional deep cleaning, but it can provide consistent routine floor care with minimal supervision.

Specifications and Key Features

• Product: Roborock QX Revo Robotic Vacuum Cleaner QXDPEA.
• Cleaning functions: Automated vacuuming, mopping, mop washing, mop drying, and dust collection.
• Maximum suction: Up to 5,500 Pa, depending on the selected cleaning mode and surface.
• Navigation: PreciSense LiDAR navigation for mapping and route planning.
• Obstacle detection: Reactive obstacle-avoidance technology for common household objects.
• Mop system: Dual rotating mop pads with a rotation speed of up to 200 revolutions per minute.
• Mop lifting: Automatic lifting of approximately 7 mm may help keep carpets drier during combined cleaning.
• Battery: 14.4 V, 5,200 mAh typical lithium-ion battery.
• Operating time: Up to approximately 180 minutes under suitable conditions; actual runtime varies with mode, flooring, navigation, and battery condition.
• Charging time: Approximately four hours.
• Dock water capacity: Approximately 5 liters for the dock system.
• Wireless connection: 2.4 GHz Wi-Fi is required for app pairing and remote control.
• Compatible dock: Use only the docking station specified for the QX Revo system.

How to Set Up the Roborock QX Revo

1. Choose a hard, level location against a wall for the multifunction dock. Leave at least 0.5 meters of open space on each side and 1.5 meters in front.
2. Connect the dock power cable and place the dock where the robot can approach it without obstruction.
3. Fill the clean-water tank and install the dirty-water tank. Do not add unapproved cleaning liquids or excessive detergent.
4. Remove protective packaging, attach the side brush and mop mounts, and place the robot on the dock so its charging contacts align.
5. Allow the robot to charge fully before its first complete cleaning cycle.
6. Install the Roborock app on a compatible mobile device, sign in or create an account, and select the QX Revo device.
7. Follow the pairing instructions and connect to the home 2.4 GHz Wi-Fi network. Enter the home network password, not the robot’s temporary network password.
8. Enable required app permissions, including location and local-network access where applicable.
9. Start a mapping run with doors open and loose objects removed. After mapping, name rooms, set no-go zones, choose suction and water levels, and create schedules.

If pairing fails, verify the password, move the robot closer to the router, confirm that the phone is using the intended home network, and reset Wi-Fi before trying again. Keep hands, clothing, pets, and children away from moving brushes and the dock’s maintenance areas.

Troubleshooting the Roborock QX Revo

Robot will not turn on or charge

Confirm that the power cable is connected and the dock has power. Reposition the robot until the charging contacts align, then clean the contacts on both the robot and dock with a dry cloth. A low battery may require several minutes on the dock before operation becomes available.

Robot cannot connect to Wi-Fi

Use a 2.4 GHz network, check the password carefully, enable app location and local-network permissions, and temporarily move the robot closer to the router. If the connection remains unsuccessful, reset the robot’s Wi-Fi and repeat the pairing process.

Robot cannot find the dock

Keep the dock against a wall with the recommended clearance. Remove objects blocking the approach path and clean the dock’s signal area and the robot’s front sensor. Avoid moving the dock after mapping unless a new map is created.

Unusual noise or poor cleaning

Pause the robot and inspect the main brush, brush cover, side brush, front wheel, and drive wheels for hair or debris. Reinstall the brush cover so its tabs fit correctly. Empty the dustbin, clean the filter, and allow washable parts to dry completely before refitting them.

When to contact support

For persistent error messages, charging faults, water leaks, battery problems, or physical damage, stop using the product and contact Roborock support. In the United States, the published support number is 1-855-960-4321. Keep the model information and purchase documentation available. A system reset restores factory settings, including Wi-Fi and scheduled cleanups, so use it only after simpler checks have failed.

Pros and Cons

Advantages

• Strong routine cleaning: Up to 5,500 Pa of suction is suitable for dust, crumbs, and pet hair on many household surfaces.
• Combined vacuum and mop operation: Rotating mop pads provide more active scrubbing than a passive flat wiping cloth.
• Reduced daily maintenance: The dock can wash mop pads, dry them, collect dust, and manage clean and dirty water.
• Accurate navigation: LiDAR mapping supports room selection, scheduled cleaning, and virtual restrictions.
• Useful carpet control: Automatic mop lifting can reduce the chance of wetting carpets during mixed-floor cleaning.

Limitations

• Requires dock space: The multifunction dock needs substantial clearance and a convenient location near power and water maintenance access.
• Regular upkeep remains necessary: Filters, brushes, sensors, water tanks, and mop components still require inspection and cleaning.
• Wi-Fi dependency: App functions and remote scheduling require a compatible 2.4 GHz wireless connection.
• Not ideal for every home: Thick rugs, cluttered rooms, stairs, high thresholds, and tangled cables may reduce performance.
• Not a deep-cleaning substitute: Manual cleaning may still be needed for corners, stairs, heavily stained floors, and areas the robot cannot access.

The Roborock QX Revo Robotic Vacuum Cleaner QXDPEA suits users who want automated daily vacuuming and mopping with advanced dock maintenance. A simpler robot vacuum may be more appropriate for small spaces, homes without room for a large dock, or users who do not need automatic mop washing and app-based room control.