Introduction

The Rust-Oleum Specialty Mirror Effect SPC-36 is an innovative aerosol spray designed to transform ordinary glass and acrylic surfaces into stunning, reflective mirror finishes. Ideal for a variety of projects, including glass vases, candleholders, and tabletops, this product allows users to create elegant decor with ease. Simply apply the spray to the reverse side of the glass for optimal results. Priced at approximately $9.99, it offers a cost-effective way to enhance your home decor.

PHYSICAL PROPERTIES

Calculated values are shown and may vary from the actual manufactured material.

Description

The Rust-Oleum Speciality Mirror Effect SPC-36 is a unique coating that creates a highly reflective, mirror-like surface. This product is perfect for adding a touch of luxury to furniture, decorative items, or even entire rooms. The coating is easy to apply and dries quickly, leaving a smooth, high-gloss finish that resists rust and corrosion. It is also environmentally friendly with minimal VOCs (Volatile Organic Compounds), making it safe for indoor use.

DESCRIPTION AND USES

Rust-Oleum Specialty Mirror Effect is an innovative coating that transforms glass and acrylic glass into a unique mirror finish. Ideal for glass vases, candleholders, framed glass, jars and tabletops. 
Apply to the reverse or opposite side of glass. For use on interior surfaces only.

PRODUCTS

PRODUCT APPLICATION

• PAINTING CONDITIONS 
  Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 65% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
• SURFACE PREPARATION 
  Remove water spots and other imperfections on substrate to achieve optimal results. Clean glass thoroughly with glass cleaner or soap and water, using a lint-free cloth. Allow glass to dry completely before painting. Coating will not hide imperfections on substrate.
• APPLICATION 
  Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. If mixing ball fails to rattle, DO NOT STRIKE CAN. Contact Rust-Oleum. Make sure to apply paint to the reverse or opposite side of glass that will be displayed. Hold can upright 10-12" from surface and spray in a steady back-and-forth motion. Apply using very thin coats, allowing the paint to dry for 1 minute between coats. Apply up to 5 coats to achieve the desired mirror effect. Paint will rapidly change in appearance and mirror effect will appear while coating dries. The painted side will appear dull, with the reverse side showing the mirror finish. Apply a thin coat of Rust-Oleum 2X Ultra Cover Matte Clear.
• DRY & RECOAT 
  Dry and recoat times are based on 70°F (21°C) and 50% relative humidity. Allow more time at cooler temperatures. Dries completely in 5-10 minutes. May recoat at anytime.
• CLEAN-UP 
  Wipe off tip before storing. Clean up wet paint with xylol or mineral spirits. Throw away empty can in trash pickup. Do not burn or place in home trash compactor.
• CLOGGING 
  If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.

Setup Guide

To achieve the best results with the Rust-Oleum Speciality Mirror Effect SPC-36, follow these steps:

1. Prepare the surface by cleaning it thoroughly and ensuring it is free of dust, grease, and other contaminants.
2. Apply a primer if necessary, especially on porous surfaces.
3. Shake the can vigorously for at least one minute before use.
4. Hold the can 8-10 inches away from the surface and spray in a steady back-and-forth motion.
5. Allow the first coat to dry completely before applying additional coats if desired.

Troubleshooting

Common issues and solutions when using the Rust-Oleum Speciality Mirror Effect SPC-36 include:

• Dull Finish: Ensure the surface is clean and dry. Apply additional coats if necessary.
• Uneven Application: Shake the can well before use and apply in thin, even layers.
• Stains or Discoloration: Use a high-quality primer on the surface before applying the mirror effect coating.
• Health and Safety: Always use in a well-ventilated area and follow safety instructions on the label.

Rust-Oleum Speciality Mirror Effect SPC-36 Pros & Cons

Pros

• Elegant mirror-like finish
• Easy to apply
• Durable and resistant to rust and corrosion
• Versatile - can be used on multiple surfaces
• Fast-drying with minimal odor

Cons

• May require multiple coats for optimal results
• Surface preparation is crucial for a smooth finish
• Not suitable for outdoor use due to UV sensitivity
• Can be more expensive than standard paints

Customer Reviews

Customers have praised the Rust-Oleum Speciality Mirror Effect SPC-36 for its ease of use and stunning results. Many have used it to transform old furniture into modern pieces and add a luxurious touch to their home decor. However, some have noted that it requires careful surface preparation and multiple coats to achieve the desired mirror-like finish.

Common Complaints

Some common complaints include the need for thorough surface preparation, the potential for uneven application if not used correctly, and the higher cost compared to regular paint.