Introduction

The Sensio Home Electric Foot Spa SSPA06 is designed to provide a luxurious at-home spa experience for tired feet. This foot spa features a combination of heat and vibration therapy, ensuring optimal relaxation and comfort. With its built-in massage rollers and adjustable temperature settings, it effectively soothes sore muscles and promotes circulation. The easy-to-use controls make it convenient for users of all ages. Priced at $79.99, it’s an excellent investment for ultimate foot relaxation.

Discover our full range of exceptional Kitchen and Home products online at https://www.sensiohome.com 

Specifications 

• Multiple massage settings: Rolling, kneading, and vibrating modes
• Heat therapy: Adjustable temperature control for optimal comfort
• Built-in pumice stone: For gentle exfoliation and callus removal
• LED lights: Soft, soothing illumination for a relaxing ambiance
• Water capacity: Approximately 3.5 gallons, suitable for most foot sizes
• Power consumption: 120V, 60Hz, 400W
• Dimensions: 18.5 x 14.2 x 7.1 inches
• Weight: Approximately 10 pounds

Sensio Home Electric Foot Spa SSPA06 Key Features

1. Function selector
2. Splash guard
3. Massage head (removable)
4. Infrared heat lamp
5. Massage rollers (removable)
6. Massage nubs

Safety

IMPORTANT SAFETY POINTS

To reduce the risk of fire, burns, electric shock or other injuries, careful study of the following important safety precautions is strongly recommended:

For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable. Please consult your local electrician for advice.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack experience or knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Always use this appliance in accordance with the enclosed operating instructions.
• Always ensure before plugging in or unplugging the appliance that the function selector is in the OFF or “0” position.
• Always periodically check the cord for damage. If the supply cord is damaged it must be replaced by the manufacturer or qualified electrician to avoid electrical hazard. Never use the appliance if this happens. Disconnect immediately and contact the manufacturer.
• Always switch off the power supply and unplug from the mains socket before emptying, filling or moving it, when not in use and before cleaning.
• Always avoid positioning the product where the power cable may be accidently damaged.
• Always check the temperature of the water you put in the foot spa before putting your feet into it.
• Never reach for an appliance that has fallen into water. Switch off at the mains and unplug it immediately and be sure not to touch the water. Do not reuse unless it has been inspected or approved by a qualified electrician.
• Never use this product near bathrooms, showers, basins or other vessels containing water and do not immerse in water or any other liquids.
• Never use if you feel discomfort, pain or irritation. Never use on swollen or inflamed feet or if you have any skin eruptions. Please consult your doctor first.
• Never stand up in or on the unit.
• Never ensure that the power cord is not placed under the appliance.
• Never use if you are sensitive to heat or have reduced feeling in your legs.
• This foot spa has a hot surface so any user sensitive to heat must be careful when using.
• Never pull the unit by the cord or use the cord as a handle.
• Never place or store the foot spa where it can fall or be pulled into a bath or sink.
• Never switch on the appliance without having filled with water and do not switch on unless you intend to use.
• Never fall asleep whilst using the foot spa.
• Never attempt to plug or unplug the unit whilst your feet are immersed on the foot spa and in the water.
• Never immerse the product into water or other liquids for cleaning or other purposes.
• Never use outdoors and only use on a clean and flat surface.
• Never let young children play with the product.
• The product should only be connected to a 220–240 V AC, 50/60 Hz electrical outlet.
• Do not use the product if it leaks, operates incorrectly, or is damaged in any way.
• If water starts to leak out of the product, switch it off immediately, unplug it and do not use it until it has been repaired by competent service personnel using original spare parts.
• Never use if the plug is damaged in any way.
• The product is only intended for personal domestic use and only in the manner described in this instruction manual.
• The product is intended for indoor use only.
• Never dismantle the product. The product contains no replaceable parts.
• Never store the product where it might fall into water or other liquid.
• Never use accessories which are not approved by the manufacturer or retailer.
• Never leave the product unattended when it is switched on.
• Make sure that your hands are dry when plugging the product in to or unplugging from the wall socket.
• Place the product in such a way that there is no risk of people tripping over its mains lead.
• Never cover the product during use.
• If you have a pacemaker, are pregnant or have diabetes, you should consult a doctor before using the product.
• Never use the product if you have open cuts or sores on your feet.

Description

The Sensio Home Electric Foot Spa SSPA06 is a sleek and sturdy device that combines functionality with aesthetics. The spa features a large basin that can accommodate most foot sizes comfortably. The multiple massage settings, including rolling, kneading, and vibrating modes, ensure a thorough and relaxing massage experience. The adjustable heat therapy option allows users to customize the temperature to their liking, enhancing the overall relaxation and therapeutic benefits.

The built-in pumice stone is a convenient addition for gently removing dead skin cells and calluses. The soft LED lights create a soothing ambiance, making each session feel like a visit to a professional spa.

Preparations before use

• Check that the control switch is in the OFF or “0” position before you plug the unit into the power.
• Do not connect or disconnect the unit to/from the mains when your feet are in the water or when your hands are wet.
• Place the appliance on a flat and suitable surface.
• Ensure the unit is NOT plugged in until you have filled with water of your desired temperature.
• DO NOT fill with water over the “MAX” water line level marked on the foot spa.

Sitting comfortably, select the desired setting - choose from

1. Bubble function, heat and massage from the massage nubs and infrared heat lamp.
2. “” Bubble function and heat from the massage nubs.
3. “” Massage from the massage nubs and infrared heat lamp. This function can be used without water in the bath.
4. “0” OFF

Directions for Use

This foot spa is for household use only. Any commercial use is not permissible. Clean your feet before use as deposits of dirt can clog the air jets and affect the bubble function efficiency

• Do not use the foot spa for more than 15–20 minutes at a time.
• Switch off and unplug the foot spa when it is not in use.
• The foot spa must only be used with water, no other liquids may be used.
• Do not add bubble bath or bath salt to the water.
• Never stand up in the foot bath, it is not designed to support the entire weight of a person.

1. Place the foot spa on a stable, flat surface.
2. Fill the bath with water, either hot or cold. Note: Do not fill the bath to above the MAX mark. The heating function cannot heat up cold water. It can only provide a little warmth for the feet.
3. Make sure that the function selector is set to “0” before plugging the foot spa into a wall socket.
4. Sit on a chair, stool, sofa, etc and place your feet into the foot spa.
5. Set the desired function using the function selector.

Emptying

1. Switch the foot spa off and dry your feet.
2. Make sure that your hands are dry and unplug the foot spa from the wall socket.
3. Tip the water out of the foot spa into a sink or into the bath to enable the water to flow out.

Note: Never pour water over the function selector.

Cleaning and Maintenance

• Turn off and unplug the foot spa from the wall socket before cleaning it.
• Never immerse the foot spa in water.
• Clean the foot spa with a soft damp cloth or sponge. Use only mild cleaning agents, never solvents or corrosive chemicals as this may destroy the unit surface and the electrical insulation.
• Always unplug the foot spa and store it in a dry, dust-free environment out of children’s reach whenever it is not to be used for an extended period of time.

Servicing

There are no user serviceable parts inside this appliance. Always refer servicing to qualified service personnel. If you drop or damage your product, do not use until it has been inspected and approved by a qualified electrician to prevent a hazard.

Setup Guide

To set up and operate the Sensio Home Electric Foot Spa SSPA06, follow these steps:

• Remove the foot spa from its packaging and ensure all components are present.
• Place the foot spa on a stable, flat surface away from water sources and hazards. Ensure there is enough space for comfortable access.
• Before plugging in the unit, fill the foot spa with water. Use either hot or cold water, but do not exceed the MAX fill line indicated inside the basin.
• Ensure the control switch is in the OFF position before plugging it into a power outlet.

Troubleshooting

If you encounter any issues with your Sensio Home Electric Foot Spa SSPA06, here are some common problems and solutions:

• No Power: Check if the device is properly plugged in and if there are any power outages in your area.
• No Heat: Ensure that the heat function is selected and that the water level is adequate.
• Check if the massage settings are selected correctly and if there is sufficient water in the basin.
• Inspect the device for any signs of damage or wear. Ensure all parts are securely in place.

Always follow the manufacturer's guidelines for use, maintenance, and cleaning to ensure safe and effective operation.

Pros & Cons

Pros

• Multiple Massage Modes: Provides a variety of massage experiences to cater to different preferences.
• Adjustable Heat Therapy: Customizable temperature settings for optimal comfort.
• Built-in Pumice Stone: Convenient for exfoliating and removing calluses.
• Sleek Design: Aesthetic and compact design that fits well in most bathrooms.

Cons

• Noise Level: Some users find the device slightly noisy during operation.
• Maintenance: Requires regular cleaning to maintain hygiene and performance.
• Water Capacity Limitation: May not be suitable for larger feet or multiple users at once.

Customer Reviews

Customers have generally praised the Sensio Home Electric Foot Spa SSPA06 for its effectiveness in providing a relaxing and rejuvenating experience. Many appreciate the multiple massage settings and adjustable heat therapy. However, some users have noted that the device can be a bit noisy and requires regular maintenance to keep it in good condition.

Most Common Complaints

• Noise during operation
• Requires frequent cleaning
• Limited water capacity for larger feet

Sensio Home Electric Foot Spa SSPA06 Warranty

This product is guaranteed for a period of 2 years from the date of purchase, against mechanical and electrical defects, when registered at www.sensiohome.com within 28 days of purchase. NB: Non-registered products are guaranteed for a period of 1 year. It is particularly important that you carefully read the instructions provided, in order to get maximum use from this product.

In the unlikely event of a fault or mechanical defect in material and workmanship within the 12 months of purchase the product should be returned to the retailer for replacement.

If the fault develops after 12 months and within 24 months from the date of original purchase and you have registered your product online within 28 days of purchase, you should contact customer services quoting the products model number and batch code.