Installation: State Water Heaters 50100 Gas Water Heater User Manual

Content

State Water Heaters 50100 Gas Water Heater Review and Manual Guide

Introduction

The state water heaters 50100 Gas Water Heater is a 50-gallon, high-efficiency commercial-style gas water heater designed for properties that need dependable hot water delivery, strong recovery performance, and long service life. This model is commonly associated with State’s Force 90+ power direct vent platform, which is built for consistent operation in demanding installations such as small businesses, multi-user facilities, and larger households that use a lot of hot water. With a 100,000 BTU natural gas input, the unit is engineered for faster recovery than standard atmospheric models, making it a practical choice for high-demand usage.

One of the biggest advantages of the state water heaters 50100 Gas Water Heater is its efficiency-focused design. The power direct vent, condensing construction supports flexible venting options and helps improve performance while reducing wasted heat. Features such as electronic ignition, self-cleaning operation, and side-mounted recirculating fittings add convenience for installers and property owners. This model is especially suitable for buyers who want a robust gas water heater for continuous hot water needs, whether in a commercial laundry room, restaurant support area, or a busy home with simultaneous showers and appliances.

Typical pricing for this class of water heater often falls in the mid-to-high range, with estimated availability generally between $1,200 and $2,500 depending on retailer, region, venting accessories, and installation requirements. Professional installation is strongly recommended because venting, gas sizing, and condensate management must be set up correctly for safe operation.

Specifications for State Water Heaters 50100 Gas Water Heater

Tank capacity: 50 gallons
Fuel type: Natural gas; some related variants may be available in dual-fuel or propane-compatible versions
Input rating: 100,000 BTU per hour
Recovery rate: Approximately 83 gallons per hour at 140°F
Venting type: Power direct vent
Construction: Glass-lined tank with condensing heat exchanger design
Ignition: Electronic ignition for improved startup reliability
Corrosion protection: Coregard-style anode protection on many comparable State commercial units
Connections: 3/4-inch water connections and 1/2-inch gas inlet are common on this class of unit
Vent material compatibility: PVC, CPVC, or polypropylene on many direct-vent models
Warranty: Often 3 years on commercial-style versions; residential State gas heaters may offer longer coverage
Dimensions: Tall cabinet format, typically around 22 inches in diameter and 66 to 67 inches high for this category

Compared with standard 50-gallon atmospheric vent heaters, the state water heaters 50100 Gas Water Heater offers noticeably higher input power, faster recovery, and more advanced venting flexibility. It is also more performance-oriented than many 40,000 to 50,000 BTU residential models, which usually cost less but recover hot water more slowly.

Pros and Cons of the State Water Heaters 50100 Gas Water Heater

Pros

Strong hot water recovery, making it a better fit for high-demand usage than basic residential gas water heaters.
High-efficiency condensing design can lower operating costs over time, especially in frequent-use settings.
Power direct venting gives more installation flexibility than standard atmospheric vent units.
Electronic ignition improves efficiency and eliminates the need for a standing pilot in many versions.
Good value for commercial-style performance if the property needs reliable, continuous hot water.

Cons

Higher upfront price than entry-level 50-gallon atmospheric gas water heaters.
Installation is more complex because venting, condensate drainage, and gas supply sizing must be handled correctly.
May be oversized for light-use homes, where a simpler 40,000 to 50,000 BTU model would be cheaper and easier to install.
Replacement parts and professional service may cost more than standard residential alternatives.

For buyers comparing alternatives, this model is better suited to performance-focused users than budget-conscious homeowners. If you only need moderate hot water use, a standard 50-gallon natural gas heater may deliver better value. If you need faster recovery and stronger durability, the state water heaters 50100 Gas Water Heater stands out as a solid mid-tier to premium option.

Customer Reviews and Real-World Feedback

Overall customer feedback for commercial-style State gas water heaters in this category is generally positive, with many users giving the unit around 4.3 out of 5 stars for hot water output, energy efficiency, and stable performance. Buyers frequently praise the strong recovery rate and the ability to support multiple fixtures without long waits between uses. Installers also appreciate the flexible venting options and the practical layout for maintenance.

Common complaints usually focus on installation cost, larger physical size, and the need for proper venting expertise. Some users note that the unit is more than they need for a small household, while others mention that replacement parts or service can be more expensive than for basic gas tanks. A typical testimonial is: “It keeps up with back-to-back showers and laundry without running out.” Another common sentiment is: “Great performance, but professional installation is absolutely worth it.” For buyers needing a durable, high-output heater, this model is a strong recommendation. For smaller homes, a standard residential gas water heater may be a simpler choice.

PDF

Faqs

How do I set up state water heaters 50100 Gas Water Heater for the first time?

Start by confirming the unit is installed on a level surface with proper gas, water, and vent connections. Before firing up state water heaters 50100 Gas Water Heater, purge air from the water lines and check for any leaks at fittings and valves. Set the thermostat to a moderate temperature, then follow the lighting or ignition steps in the manual exactly. After startup, verify steady burner operation and hot water delivery at a faucet.

What gas and venting requirements should I check before installing state water heaters 50100 Gas Water Heater?

State water heaters 50100 Gas Water Heater should be matched to the correct gas type, line pressure, and venting setup listed by the manufacturer. Make sure the gas supply can support the burner demand and that all shutoff valves are accessible. Venting must be clear, properly sized, and routed to avoid backdrafting. If your home uses propane instead of natural gas, confirm the model is configured for it before installation.

Why is state water heaters 50100 Gas Water Heater not producing enough hot water?

If state water heaters 50100 Gas Water Heater runs out of hot water too quickly, the thermostat may be set too low, the burner may be underperforming, or sediment may be reducing tank efficiency. Check whether the demand in your home exceeds the tank size during peak use. Also inspect for cross-connected plumbing, which can mix cold water into the hot line. If the issue continues, a burner or gas supply problem may need service.

What should I do if state water heaters 50100 Gas Water Heater will not ignite?

First, confirm the gas supply is on and that the control valve is set correctly. If state water heaters 50100 Gas Water Heater uses an electronic ignition, check whether the pilot, igniter, or flame sensor is dirty or faulty. Make sure there is no error light or lockout condition on the control panel. Reset the unit only once after checking the basics. If gas odor is present, shut everything down and call a licensed technician immediately.

How do I adjust the temperature on state water heaters 50100 Gas Water Heater safely?

Locate the thermostat or temperature dial on state water heaters 50100 Gas Water Heater and change it in small increments instead of making large jumps. A moderate setting is usually best for comfort and energy savings while reducing scald risk. After each adjustment, wait long enough for the tank to cycle and test the water at a faucet. If the water is too hot or too cold, recheck the setting and allow more time for stabilization.

What maintenance does state water heaters 50100 Gas Water Heater need to run efficiently?

Routine maintenance helps state water heaters 50100 Gas Water Heater heat faster and last longer. Flush the tank regularly to remove sediment, especially if your water is hard. Inspect the anode rod, pressure relief valve, burner area, and venting for wear or blockage. Keep the area around the heater clear of dust and stored items. A yearly professional inspection can catch combustion, gas, and safety issues before they turn into expensive repairs.

Is state water heaters 50100 Gas Water Heater compatible with standard home plumbing and fixtures?

In most homes, state water heaters 50100 Gas Water Heater can connect to standard residential hot and cold water plumbing, but fittings, pipe size, and isolation valves must match the installation requirements. Check that the water pressure is within the recommended range and that nearby fixtures can handle the heater’s output temperature. If you are replacing an older unit, confirm inlet and outlet locations so the installation does not require major rework.

How can I improve recovery time on state water heaters 50100 Gas Water Heater during back-to-back showers?

To improve recovery time, make sure state water heaters 50100 Gas Water Heater has an unobstructed gas supply and a clean burner so it can reheat the tank efficiently. Lowering hot water waste at fixtures also helps, such as using low-flow showerheads and avoiding long draws. If the tank is undersized for your household, recovery will always feel slow. In that case, professional sizing advice or a higher-capacity model may be the best solution.

T669 Wired USB Microphone

Vital 100S Smart True HEPA Air Purifier