Introduction

A premier Swiss watch company renowned for its modern design aesthetic, Movado has earned more than 100 patents and 200 international awards for artistry and innovation since 1881. It is the hallmark of some of the most famous timepieces ever created, notably the Movado Museum® Watch. Designed in 1947 by artist Nathan George Horwitt and regarded today as an icon of Modernism, the watch dial defined by a single dot at 12 o’clock, symbolizing the sun at high noon, has been acclaimed for purity of design unrivaled in the history of time-keeping.

Detailed Specifications

The Movado 0606982 Quartz & Automatic 2-Hand Models come with the following key features:

Movement: Quartz and Automatic
Stainless steel case and bracelet
Scratch-resistant sapphire crystal
Water resistance up to 30 meters
Date display
Two-hand design
Diameter: 40mm
Thickness: 10mm
Weight: 150g

Standard 2-Hand Models Quartz and Automatic

Includes most Movado Museum Dial watches

standard_2-hand_models_quartz_&_automatic_stainless_steel_0606982.png

Crown Positions

Position 1: Normal running position. Crown pushed into case.
Position 2:
- To set TIME: Rotate crown in either direction.
- To manually wind an automatic movement: The motion of your arm during normal daily activities should be sufficient to keep the movement of your Movado automatic timepiece wound. However, if you have not worn your watch for 38 hours or more, and the watch has stopped, you will need to wind it by hand before setting the time:
  1. With the crown in position 1, turn the crown clockwise approximately 20 revolutions.
  2. Reset time following instructions above.

Standard 3-Hand Day/Date Models Quartz and Automatic

Includes Datron, SE, Series 800 Sub-Sea, and Vizio PEEK quartz watches, and Red Label and Series 800 Sub-Sea automatics

standard_3-hand_day_quartz_&_automatic_stainless_steel_0606982.png

Crown Positions

Position 1: Normal running position. Crown pushed into case.
Position 2:
- To set DATE: Rotate crown clockwise.
- To set DAY: Rotate crown counterclockwise.
Position 3:
- To set TIME: Rotate crown in either direction.

Important: DO NOT set the Date on Vizio PEEK models when the time is between 9:30 PM and 3:00 AM, and automatic calendar changes are already in progress. Doing so could damage the mechanism.

Note: If your watch has a screw-down crown, before you can set the Date (Day/Date) or Time, you must first unlock the crown by turning it counterclockwise approximately six rotations. After Time/Date (Day/Date) setting, the crown must be screwed back down into the case to ensure water resistance.

To Manually Wind an Automatic Movement

The motion of your arm during normal daily activities should be sufficient to keep the movement of your Movado automatic timepiece wound. However, if you have not worn your watch for 38 hours or more, and the watch has stopped, you will need to wind it by hand before setting the time:

With the crown in position 1, turn the crown clockwise approximately 20 revolutions.
Reset time following instructions above.

Description

Those who recognize the aesthetic value of simplicity are the target audience for the Movado 0606982 Quartz & Automatic 2-Hand Models Watch. The sleek stainless steel case and band, in conjunction with the two-hand design, offers these watches an appearance that is both clean and classy. The water resistance function enables you to use the watch in a variety of environments, while the scratch-resistant sapphire crystal guarantees that the watch's face will continue to be clear and easy to read. The date display is a helpful addition to the design, as it makes it simple to keep track of the days that have passed. The Movado Quartz & Automatic 2 hand Models are an excellent option to consider if you are searching for a watch not just to wear to the office but also to a night out on the town.

Quartz Worldtime Models with GMT Quick Change Feature

Includes Series 800 Worldtime models

quartz_worldtime_models_quartz_&_automatic_stainless_steel_0606982.png

Legend

H: Hour hand
M: Minute hand
S: Seconds hand
G: GMT hand
D: Date window
T: 24-hour Universal time scale

Crown Positions

Position 1: Normal running position; crown pushed into case.
Position 2: Rapid correction of Date and GMT hand:
- Turn crown clockwise to change Date D.
- Turn crown counterclockwise to move GMT hand G around 24-hour scale T.
Position 3: Time setting position

These models feature a precise Swiss quartz worldtime movement with quick change feature. Local time is indicated by the hour H, minute M and seconds S hands, while arrow-tipped GMT hand G tracks the current time in a selected global time zone on 24-hour scale T. A time zone is selected by turning the unidirectional rotating bezel inscribed with the names of major world cities until the city in the desired zone is aligned at 12 o’clock. The worldtime indicator hand G is adjusted by the crown.

To Set the Time

Pull crown out to position 3; watch stops.
Turn crown in either direction to move hands to desired time.
Push crown back in to position 1; watch restarts, now set to correct time.

To Correct the Date (Quick Mode)

Pull crown out to position 2; watch continues to run.
Turn crown clockwise until correct date appears in date window D.
Push crown back in to position 1.

To Set the Worldtime GMT Indication

Pull crown out to position 2; watch continues to run.
Turn crown counterclockwise until arrow-tipped GMT hand G points to current correct time in desired second time zone on 24-hour scale T.
Push crown back in to position 1.

Automatic 2- and 3-Hand Models with Animated Date

Includes Movado Red Label Calendomatic and Red Label Calendomatic with small seconds

automatic_2-_and_3-hand_models_quartz_&_automatic_stainless_steel_0606982.png

Legend

H: Hour hand
M: Minute hand
S: Small seconds hand
D: Date window
1, 2, 3: Crown positions

Crown Positions

Position 1: Normal running position. Crown pushed into case.
Position 2: Quick date correction.
Position 3: Time setting position.

To Adjust the Time

Pull crown out to position 3; watch (small seconds hand S in Figure B) stops.
Turn crown in either direction to move hands to desired time, making sure highlighted date changes at midnight, not noon.
Push crown back in to position 1; watch restarts, now set to correct time.

To Correct the Date (Quick Mode)

Pull crown out to position 2; watch continues to run.
Turn crown clockwise until correct date appears under date highlighter D.
Push crown back in to position 1.

To Manually Wind the Automatic Movement

With the crown in position 1, turn the crown clockwise approximately 20 revolutions.
Reset time following instructions above.

Chronographs

A chronograph combines two time-keeping functions. It incorporates a “stopwatch” device to measure intervals of time, independent of the time of day. All Movado Swiss chronographs are water resistant to a minimum depth of 30 meters (3 bar/3ATM/99 feet).

Quartz Chronograph 1/1 of a Second – Type A

Includes Movado BOLD large 43.5 mm and Series 800 Sub-Sea quartz chronographs

quartz_chronograph_quartz_&_automatic_stainless_steel_0606982.png

Legend

H: Hour hand
M: Minute hand
S: Small seconds hand
C: Chronograph 60-seconds counter
E: Chronograph 30-minutes counter
F: Chronograph 12-hours counter
D: Date window
1, 2, 3: Crown positions
A: Chronograph push-button (start/stop)
B: Chronograph push-button (split-time/reset)

These chronograph models feature a minute counter (up to 30), hour counter, and small seconds subdial; center-mounted chronograph seconds hand; and date or big date window. They can be used to time an event up to 12 hours in duration to the nearest second.

Time/Date Setting

To Set the Time

Unlock screw-down crown on models with this feature. See “Screw-down Crown” for instructions.
Pull crown out to position 3; watch stops.
Turn crown in either direction until hands indicate desired time.
Push crown back in to position 1; watch restarts.
Screw crown back into case on models with screw-down crown.

To Adjust the Time to the Exact Second

Unlock crown on models with screw-down crown.
As soon as small seconds hand S reaches <<60>> position, pull crown out to position 3; watch stops.
Turn crown to move hands and set time, making sure date changes at midnight, not noon. Move hands slightly ahead of exact time, then slowly turn crown counterclockwise to align minute hand with correct minute marker. Take an accurate time signal (from a radio news station, for example). When audible tone signals exact time, immediately push crown back in to position 1; watch restarts, now set to the exact time.
Screw crown back down into case on models with screw-down crown.

To Correct the Date (Quick Mode)

Pull unlocked crown out to position 2; watch continues to run.
Turn crown clockwise until correct date appears in window D.
Push crown back in to position 1 and screw back down into case.

Quartz Chronograph 1/1 of a Second – Type A

Note: If date is adjusted between 9:00 PM and 12:00 AM when automatic date changes are already in progress, it should be set to the following day: The date will not automatically advance at midnight if it has been corrected via quick mode during these hours.

To Set Date/Time Following a Battery Change

Pull unlocked screw-down crown out to position 2; watch continues to run.
Turn crown clockwise until yesterday’s date appears in window D.
Pull crown out to position 3; watch stops.
Turn crown clockwise until today’s date appears in window D.
Continue to turn crown clockwise until hands indicate correct time.

Note: Be sure to take AM/PM into account when setting time.

Push crown back in to position 1, and screw back down into case.

Setup Guide

It is simple to set up the Movado 0606982 Quartz & Automatic 2-Hand Models:

To set the time, unscrew the crown and pull it out to the first position.
To set the hour and minute hands, turn the crown.
After adjusting the time, make sure the crown is water-resistant by pushing it back in and tightening the screw.
Pull the crown out to the second position and turn it until the correct date appears on the screen to set the date.
Tighten the screw after inserting the crown once more.

Chronograph Functions

Overview

Use buttons A and B to operate the chronograph. Pressing button A the first time will start the chronograph. Pressing button A a second time will stop the chronograph, allowing elapsed time to be read. Pressing button A a third time will restart the chronograph. Pressing button B will reset chronograph hands C, E and F to zero. Adjusting the time does not stop the chronograph, but it does block buttons A and B for as long as the crown is pulled out.

Note: Crown must be in position 1 and hands must be at zero before chronograph is started. Press button B to reset hands to zero.

Important: Do not push button A or B when crown is pulled out to position 2 or 3. If button A or B is accidentally activated while crown is not flush against case, one or more of the chronograph hands may become de-synchronized. Should this occur, follow instructions at end for synchronizing chronograph hands.

Simple Chronograph Functions

To measure the duration of a single, non-stop event:

Press button A to start chronograph.
Press button A a second time to stop chronograph, and read the 3 chronograph hands to determine elapsed time, for example: 1 hour, 8 minutes, 47 seconds.
Press button B to reset chronograph hands to zero.

Accumulated Time Functions

To measure the combined time of a series of shorter events, for example the actual playing time of a football game, where play is repeatedly interrupted:

Press button A to start chronograph.
Press button A a second time to stop chronograph and read elapsed time, for example: 15 minutes, 22 seconds.
Press button A again to resume measurement.
Press button A a fourth time to stop chronograph again, and read new elapsed time, for example: 28 minutes, 35 seconds.
Note: Each time you stop chronograph, chronograph hands will indicate total accumulated time.
Repeat steps 1 and 2 to add each additional interval of time.
After you have taken your final accumulated time reading, press button B to reset chronograph hands to zero.

Quartz Chronograph 1/1 of a Second – Type A

Split-time or Intermediate-time Functions

To take intermediate time readings as a race progresses:

Press button A to start chronograph.
Press button B to momentarily stop chronograph.
Read off the intermediate time, for example: 11 minutes, 16 seconds.
Press button B to resume chronograph function. The 3 chronograph hands will quickly catch up with ongoing event.
To read a second split time, press button B again. Repeat steps 2 through 4 to take any additional split times.
Press button A to stop chronograph.
Take a reading of the final time, for example: 2 hours, 14 minutes, 7 seconds.
Press button B to reset chronograph hands to zero.

Synchronizing Chronograph Hands

After a battery change or in the event of an error, you may need to manually adjust one or more of the chronograph hands to align them all correctly at their zero positions.

Notes: Once in corrective mode, each press and release on push-button A will advance active chronograph hand by one increment. To advance hand rapidly, depress and hold push-button A. You may exit correction mode at any time in the sequence by returning crown to position 1 (and screwing it back down into the case).

Pull unlocked screw-down crown out to position 3.
Press and hold push-buttons A and B simultaneously for at least 2 seconds to enter corrective mode. When chronograph seconds hand C rotates 360°, corrective mode is activated; release buttons A and B.
Adjust center-mounted chronograph seconds hand C using push-button A.
When hand C reaches zero position, press push-button B.
Now press push-button A to adjust minute counter hand E.
When hand E reaches zero position, press push-button B.
Use push-button A again to adjust hour counter hand F.
When hand F reaches zero position, push crown back in to position 1 (and screw back down into case). Timing hands are now synchronized at zero position, and chronograph is ready for use.

Quartz Chronograph 1/1 of a Second – Type B

Includes the Series 800 Sub-Sea Retrograde chronograph

quartz_chronograph-quartz_&_automatic_type_b_stainless_steel_0606982.png

Legend

H: Hour hand
M: Minute hand
S: Small seconds hand
C: Chronograph retrograde 30-seconds counter
E: Chronograph retrograde 60-minutes counter
F: Chronograph retrograde 5-minutes counter
D: Date window
1, 2, 3: Crown positions
A: Chronograph push-button (start/stop)
B: Chronograph push-button (split-time/reset)

This chronograph model features a center-mounted retrograde seconds counter (up to 30), two retrograde minutes counters (up to 5 and up to 60), a small seconds subdial, and date window. It can be used to time an event up to 1 hour, 5 minutes and 59 seconds in duration to the nearest second. The chronograph will stop automatically after 2 hours.

Time/Date Setting

Crown Positions

Position 1: Normal running position. Crown screwed-down into case.
Position 2: To set DATE: Rotate crown clockwise.
Position 3: To set TIME: Rotate crown in either direction.

To Adjust the Time

Unlock screw-down crown. See “Screw-down Crown” for instructions.
When small seconds hand S reaches <<60>> position, pull crown out to position 3; watch stops.
Turn crown in either direction to move hands and set time, making sure date changes at midnight, not noon.
Push crown back in to position 1, and screw back down into case. See “Screw-down Crown” for instructions. Watch will restart, now set to correct time.

To Correct the Date (Quick Mode)

Unlock screw-down crown. See “Screw-down Crown” for instructions.
Pull crown out to position 2; watch continues to run.
Turn crown clockwise until correct date appears in window D.
Push crown back in to position 1, and screw back down into case. See “Screw-down Crown” for instructions.

Chronograph Functions

Overview

Use buttons A and B to operate the chronograph. Pressing button A the first time will start the chronograph. Pressing button A a second time will stop the chronograph, allowing elapsed time to be read. Pressing button A a third time will restart the chronograph. Pressing button B will reset chronograph hands C, E and F to zero. Important: Crown must be in position 1, screwed down into case, and counter hands must be at zero before chronograph is started. Press button B to reset hands to zero, or, if necessary, reset them following instructions below.

To Reset Chronograph Counters to Zero

All chronograph hands must be in the zero position before you start a timing. Unlock crown and follow these steps as needed to reset the hands of the counters:

60-Minutes Counter: Pull crown to position 2, press and hold push-button B and rotate crown clockwise.
30-Seconds Counter: Pull crown to position 3, press and hold push-button A and rotate crown clockwise.
5-Minutes Counter: Pull crown to position 3, press and hold push-button B and rotate crown clockwise.

Simple Chronograph Functions

To measure the duration of a single, non-stop event:

Press button A to start chronograph.
Press button A a second time to stop chronograph, and read the chronograph hands to determine elapsed time, for example: 5 minutes, 57 seconds.
Press button B to reset chronograph hands to zero.

Accumulated Time Functions

To measure the combined time of a series of shorter events, for example the actual playing time of a football game, where play is repeatedly interrupted:

Press button A to start chronograph.
Press button A a second time to stop chronograph and read elapsed time.
Press button A again to resume measurement.
Press button A a fourth time to stop chronograph again, and read new elapsed time.

Note: Each time you stop chronograph, chronograph hands will indicate total accumulated time.

Repeat steps 1 and 2 to add each additional interval of time.
After you have taken your final accumulated time reading, press button B to reset chronograph hands to zero.

Split-time or Intermediate-time Functions

To take intermediate time readings as a race progresses:

Press button A to start chronograph.
Press button B to momentarily stop chronograph.
Read off the intermediate time, for example: 6 minutes, 4 seconds.
Press button B to resume chronograph function; the 3 chronograph hands will quickly catch up with ongoing event.
To read a second split time, press button B again. Repeat steps 2 through 4 to take any additional split times.
Press button A to stop chronograph.
Take a reading of the final time, for example: 25 minutes, 18 seconds.
Press button B to reset chronograph hands to zero.

To Reset Chronograph Hands

After changing the battery, or in the event of an error, the chronograph hands can be realigned to zero if needed:

Note: To advance hands rapidly, press push buttons and hold longer than one second.

Crown position 2: Adjust minute-counter hand E using button B.
Crown position 3: Adjust chronograph fifths-of-a-second hand C using button A.

Quartz Chronograph 1/10 of a Second – Type A

Includes the Movado Junior Sport quartz chronograph

Legend

H: Hour hand
M: Minute hand
C: Chronograph seconds hand
E: Chronograph 30-minutes counter
G: Chronograph tenths-of-a-second counter
S: Small seconds hand
D: Date window
1, 2, 3: Crown positions
A: Chronograph push-button (start/stop)
B: Chronograph push-button (split-time/reset)

This quartz chronograph model features a tenths-of-a-second counter, minute counter (up to 30), and small seconds subdials; center-mounted chronograph seconds hand; and date window. It can be used to time an event up to 29 minutes and 59.9 seconds in duration to the nearest 1/10 of a second.

Time/Date Setting

To Adjust the Time

As soon as the small seconds hand S in the subdial at 6 o’clock reaches the <<60>> position, pull crown out to position 2; watch stops.
Turn crown in either direction to move hands and set the time – check that the date changes at midnight, not at noon.
Move the hands slightly ahead of the exact time, then slowly turn the crown counterclockwise to align the minute hand M with the correct minute marker.
Take an accurate time signal (from a radio news station, for example). When the audible tone signals the exact time, push crown back in to position 1; watch will restart, now set to the exact time.

To Correct Time Zone and Date

Important: DO NOT change the date between 10:00 PM and 2:00 AM when automatic calendar changes are in progress. Doing so could damage the movement. These adjustments will not stop the watch and do not affect the time indicated by the minute and seconds hands.

Pull crown out to position 2.
Turn crown in either direction to move hour hand H one or several hours ahead or back, or to change the time after crossing into another zone.
To change the date D, advance the hour hand H by two complete revolutions, so that the date will change at midnight, not noon.
Once the adjustments have been made, return the crown to position 1 immediately.

Chronograph Functions

Overview

Use buttons A and B to operate the chronograph. Pressing button A the first time will start the chronograph. While the chronograph is running, once chronograph seconds hand C has completed one turn, minute-counter hand E will jump ahead one minute. Tenths-of-a-second hand G does not move when the chronograph is running. Pressing button A a second time will stop the chronograph and move hand G to the relevant tenth-of-a-second mark. Pressing button B will reset hands G, E and C to zero. Important: Crown must be in position 1, and hands must be at zero before the chronograph is started. If necessary, press button B to reset to zero. DO NOT use chronograph while crown is pulled out to position 2 or 3. DO NOT operate chronograph buttons A and B while the timepiece is under water.

Note: Adjusting the time does not stop the chronograph, but it does block buttons A and B for as long as the stem of crown is pulled out.

Simple Chronograph Functions

Press button A to start chronograph.
Press button A a second time to stop chronograph.
Press button B to reset chronograph to zero.

Split-time Functions

You can take intermediate time readings as a race progresses:

Press button A to start chronograph.
Press button B to momentarily stop chronograph.
Read off the intermediate time.
Press button B to resume chronograph function. Hands will catch up with the ongoing event.
To read a second split time, press button B again. Repeat steps 2 through 4 to take any additional split times.
Press button A to stop chronograph.
Take a reading of the final time.
Press button B to reset chronograph to zero.

First Place and Runner-up Results

These chronograph models also allow you to measure both a winning time and runner-up results:

Press button A to start chronograph.
As soon as the winner crosses finish line, press button B. The chronograph will stop.
When the second runner crosses finish line, press button A.
Note the time for the winner as shown on the dial.
Then press button B; the hands will move up to indicate the time for the runner-up.
Press button B again to return all hands to zero.

Note: To advance hands rapidly, press push buttons and hold longer than one second.

Automatic 2-Hand Models with Moon Phase Aperture and Date Indicator

Includes Movado Red Label Skymap

aperture_quartz_&_automatic_stainless_steel_0606982.png

Legend

H: Hour hand
M: Minute hand
L: Moon phase aperture
D: Date indicator
A: Moon phase corrector button
B: Date corrector button

Crown Positions

Position 1: Normal running/manual winding position. Crown pushed into case.
Position 2: Time-setting position.

Note: The motion of your arm during normal daily activities should be sufficient to keep the movement of your fine Movado automatic timepiece wound. However, if you have not worn your watch for 38 hours or more, and the watch has stopped, you will need to wind it by hand before setting the time or indications.

To Manually Wind the Automatic Movement

With the crown in position 1, turn the crown clockwise approximately 20 revolutions.
Reset time following instructions below.

To Set the Time

Pull crown out to position 2; watch stops.
Turn crown in either direction to move hands to desired time, making sure indicated date changes at midnight, not noon.
Push crown back in to position 1; watch restarts, now set to correct time.

Important: DO NOT use the date or moon phase corrector buttons between 4:30 PM (16:30H) and 1:00 AM (1H) when automatic calendar changes are in progress. Doing so could damage the movement.

To Correct the Moon Phase Indicator

Use the narrow end of the supplied corrector tool to operate moon phase corrector button A located along the top side of the case at 12:30 o’clock. Each press and release of button A will advance the lunar indication in moon phase aperture L by one day; 28 presses and releases will cycle through one lunar month.

Depress and release corrector button A until the image of a full moon (white) appears in aperture L.
Consult a calendar to determine the date of the last full moon, then count how many days have passed since that date. For example, if the last full moon was on the 6th and today is the 17th, then 11 days have passed.
Depress and release corrector button A once for each day that has elapsed since the last full moon; the current phase of the moon will be now be displayed in aperture L.

To Correct the Date (Quick Mode)

Use the narrow end of the supplied corrector tool to depress date corrector button B located along the bottom side of the case at 6:30 o’clock; each press and release of button B will advance the date indicator hand D by one number.

Digital L.E.D. Touch-Screen Models with Dual-Time Zone and Month/Date Display

digital_l.e.d._touch-screen_quartz_&_automatic_stainless_steel_0606982.png

Legend

LED: Main Digital Display
T1: Time Zone 1 Mode Indicator
T2: Time Zone 2 Mode Indicator
DA: Date Mode Indicator
P: PM Indicator (appears in Setting Mode only)

These dual-time digital watch models feature an innovative touch screen 4-Digit LED display with 3-mode function: TIME1, TIME2 and DATE. In the Main LED display, the TIME Modes are shown in 12-hour format; the DATE Mode appears in Month/Date format. One of three smaller LED displays beneath the Main one indicates which Mode is active. The touch-screen crystal is specially treated to resist fingerprints/smudging.

Touch Regions

A: ON/OFF
B: SET
C: SWIPE
D: SWIPE

The crystal over the dial has four touch regions or quadrants:

A: Touch near 12 o’clock to turn the watch ON or OFF.
B: Touch near 6 o’clock to SET the active display.
C/D: Swipe your finger horizontally in either direction to move from one display MODE to another:

Mode sequence:

TIME1 (Hour/Minutes)
TIME2 (Hour/Minutes)
DATE (Month/Date)

Operating the Watch/Touch-Screen

To turn your watch ON, touch the dot in region A, maintaining contact for about 2 seconds until the LED display lights up. TIME1 will automatically display at start-up.
Note: Once ON, whenever the touch screen idles (is not touched) for 5 seconds, the watch will go into Sleep Mode, and the LED display will go dark, conserving battery power: Touch any region to wake up the LED display.
To move between the 3 Display Modes, swipe your finger across regions C and D in either direction.
To turn the watch OFF, touch the dot in region A for about 2 seconds until the LED displays the word “bye”, then goes dark.

Movado Watch Collection

The Movado watch collection features precise Swiss quartz and automatic movements, solid stainless steel craftsmanship and scratch-resistant sapphire crystals. Select styles are fashioned of solid 18K gold, while others incorporate genuine diamonds and fine leather straps, or exciting new materials like carbon fiber, rubber, ceramic and titanium. Movado Series 800® sport models are crafted of high grade Performance Steel™, some equipped with XTremeResin™ straps reinforced by KEVLAR®. The Movado BOLD™ collection features new touch-screen digital and Swiss quartz analog movements, and K1 crystals. It draws on a range of innovative materials including sleek TR90, silicone and other soft polymers, aluminum and titanium. Water resistant, all Movado watches are distinguished by a legacy of design innovation and a dedication to the future of time. Congratulations on your purchase.

Care and Maintenance

Like any finely crafted mechanism, your Movado watch requires periodic maintenance to ensure optimal performance. Maintenance includes complete disassembly, cleaning, replacement of parts as needed, reassembly and lubrication of the movement. A maintenance interval of 3 to 5 years is recommended, in addition to any required battery replacement.

Repair and Adjustment: Never open the watch yourself. If your watch needs repair or adjustment, take or mail it directly to a Movado Authorized Service Center. For a complete worldwide listing, visit us online at http://www.movado.com
NOTE: The Movado Watch Company assumes responsibility only for service performed at its Authorized Service Centers.
Shock: All Movado watches have shock-resistant movements, individually tested to meet international standards.
Dust: Dust can enter a watch if the case, crystal or crown is not intact. A small particle is enough to stop the movement. Have your watch repaired promptly if the crystal becomes loose, chipped or cracked, or if there is damage to the case or crown.
Magnetism: The exposure of a timepiece to strong magnetic fields will affect its time-keeping, and may cause it to stop. A quartz watch should resume working with its original accuracy when removed from the magnetic field; a mechanical timepiece may require demagnetization before it will operate again.
Water Resistance: All Movado watches are tested to meet international standards for water resistance. Most styles are water resistant to 30 meters (3 bar/3ATM/99 feet); certain models are water resistant to even greater pressures/depths, as marked on the dial or case-back.

Caution: If the water resistance limit is not marked on your watch, do not subject it to a pressure/depth greater than 3 bar (3 ATM/30 meters/99 feet), or your watch could be damaged and your warranty will be voided.

Important: Do not operate the watch crown, push-buttons on a chronograph model, or any other pushers/buttons when the timepiece is wet or under water.

NOTE: The Movado Watch Company will not be responsible for any damage caused by or related to leakage originating from improper handling or damage to the case, crown, gaskets or crystal. To maintain water resistance, yearly maintenance is required. The gaskets and crown which seal the case are subject to wear and deterioration under normal use. These parts should be inspected and replaced as needed each time the watch is opened for service, including battery changes. Your Authorized Movado Service Center will automatically retest your watch for water resistance as a routine step in all service orders.

Other Precautions

Screw-down Crown or Pushers: If your watch is equipped with a screw-down crown or pushers, be sure to screw it/them back down into the case after every operation.
Water Resistance: Water resistance applies only to the watch case; some watch straps should not be worn under water or subjected to wet conditions. Please see STRAP CARE.
Temperature Variations: Avoid exposing your watch to sudden and excessive temperature variations.
Physical Impact: Do not drop your watch or bang it against a hard surface. Water resistance must be rechecked after every violent shock.
Cleaning: Clean your watch regularly by wiping it with a soft cloth dampened with fresh water, especially after exposure to seawater.

Strap Care

While the life span of a watch strap depends on your care and wearing habits, as well as the climate in which you live, proper care will extend its life.

Leather Straps: Leather straps should be kept dry. Exposure to water may cause a leather watch strap to become brittle and eventually break. To preserve the finish of the leather, contact with perfumes should be avoided. Following exposure to chlorinated or salt water, gently damp wipe your leather strap with fresh water, and air dry.
ThermoResin™ or XTremeResin™ Straps: To help preserve the natural elasticity and quality of a Series 800 ThermoResin™ or XTremeResin strap, rinse it using a soft cloth soaked in fresh water following exposure to salt water, chemicals or abrasive substances.
White Series 800 ThermoResilient™ Strap or Movado Master White Rubber Strap: Use warm water and a neutral pH soap applied to a soft cloth to gently clean a white Series 800 ThermoResilient™ strap or a Movado Master white rubber strap; then wipe with a second clean cloth dipped in warm water, or rinse carefully under warm running water. Contact with acetone and ethyl alcohol should be avoided.
Movado BOLD Coated White Leather Strap or White TR90/Silicone Bracelet: A natural gum rubber or “rubber cement pick-up” (found in art supply stores) may be used to remove most surface stains from a Movado BOLD coated white leather strap or white TR90/silicone bracelet. Simply rub the natural gum gently across the soiled area until the strap/bracelet is clean. For stains that have penetrated the surface of a white Movado BOLD strap or bracelet, organic solvents like Zymol liquid leather cleaner or Columbus gel super cleaner, a de-inking roller (ethyl alcohol and propylene ink remover) or an ethyl alcohol-based solution such as Purell hand sanitizer (62% ethyl alcohol) may be used. Wipe soiled area with a soft wet cloth. Then dampen a cotton ball or soft clean white cloth with the cleansing solution, and rub soiled area gently. Repeat 2 to 3 times until stain disappears. Please test for color fastness on inside surface before applying any solution. For best results, treat all stains/soil promptly.

NOTE: Movado watch straps are not covered by the Movado watch warranty.

Battery Information

A Movado quartz timepiece has a 1.55 Volt silver-oxide battery that is specially designed for watches. It will last approximately 18 – 36 months under normal use.

Note: Frequent use of special functions, like the stopwatch timer on chronograph models, may shorten battery life. End-of-life feature: The seconds hand on many models will start to move haltingly in 4-second increments when the battery is almost exhausted, signaling the need to have it replaced. Battery replacement: It is important to use only the replacement battery recommended by Movado. Take or send your watch to an Authorized Service Center to have battery changed – your old battery will be disposed of/recycled properly. Do not attempt to change the battery yourself.

Troubleshooting

If you encounter any issues with your Movado 0606982 Quartz & Automatic 2-Hand Models, here are some common problems and solutions:

The watch is not keeping accurate time: Ensure the crown is tightly screwed in to maintain water resistance and prevent air from entering the watch.
The date is not changing: Make sure the crown is pulled out to the second position and turned to set the date. If the date still does not change, the watch may need a battery replacement or a service.
The watch is foggy or moisture is present: This could be a sign of water ingress. Have the watch inspected by a professional to ensure it is still water-resistant.

Movado Limited Warranty

Movado will, within two (2) years from date of purchase, repair or replace (at Movado’s option), the movement of your Movado watch free of charge if such movement proves to be defective in material or workmanship under normal use.

Service Under Warranty

Your Movado timepiece is protected from the date of purchase by a two-year limited warranty. To obtain service under the warranty, you must present a valid warranty card and proof of purchase. See “Warranty Information” for details.

Note: Movado is not to be held liable for any incidental or consequential damages occurring from the failure or malfunction of its product.

Pros & Cons

Pros:
- Minimalist and sophisticated design
- Scratch-resistant sapphire crystal
- Water resistance up to 30 meters
- Date display
Cons:
- No chronograph or other complications
- Limited water resistance compared to other watches in the price range

Search Manuals in: 0606982

Read More