Bissell SPINWAVE Floor Cleaner Mop 2039 SERIES: A Deep Clean for Your Floors

The Bissell SPINWAVE Floor Cleaner Mop 2039 SERIES is a versatile and powerful cleaning tool designed to make your life easier. This innovative mop is perfect for tackling a variety of floor types, including tile, vinyl, hardwood, and laminate. With an estimated price range of $150 to $200 and a launch date set for late 2022, this product is a must-have for any homeowner looking to maintain a spotless living space.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR SPINWAVE™.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.
Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
Use indoors only.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not use for any purpose other than described in this User’s Guide. Use only manufacturer’s recommended attachments.
Do not use with damaged cord or plug. If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Turn off all controls before plugging or unplugging appliance.
Use extra care when cleaning on stairs.
Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
Use only BISSELL cleaning products intended for use with this appliance to prevent internal component damage.
Do not immerse. Use only on hard floor surfaces moistened by the cleaning process.
Keep appliance on a level surface.
Do not carry the appliance while in use.
To Reduce The Risk Of Injury From Moving Parts – Unplug Before Servicing.
Risk Of Injury. Mop Pads May Start Unexpectedly. Unplug Before Cleaning or Servicing.

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

What’s In The Box?

NOTE: Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

bissell_spinwave_floor_cleaner_mop_2039_series-in_the_box.png

Getting to Know Your SpinWave™

bissell_spinwave_floor_cleaner_mop_2039_series-parts.png

Handle
Digital Controls
Clean Water Tank
Low Profile Foot
Power Spin Pads
Spray Nozzle
In-Use Cord Clip
Quick Release™ Cord Wrap
Lower Cord Wrap

Detailed Specifications

The Bissell SPINWAVE Floor Cleaner Mop 2039 SERIES boasts several key features, including:

Swivel head for easy maneuverability
Adjustable steam control for customized cleaning
On-demand spray for targeted cleaning
Reusable microfiber pads for eco-friendly cleaning
Integrated scrubbing brush for tough stains
Large water tank for extended cleaning sessions
Cordless design for added convenience

Bissell Floor Cleaner Mop Assembly

WARNING: Do not plug in your SpinWave™ until you are familiar with all instructions and operating procedures.

Your BISSELL SpinWave™ machine comes in two easy-to-assemble components and does not require any tools to assemble.

Insert handle into body of unit until you hear a click.
Then, wrap the cord around the Quick Release™ Cord Wrap and the Lower Cord Wrap. Your assembly is now complete!

bissell_spinwave_floor_cleaner_mop_2039_series-assembly.png

NOTE: To easily unwrap the cord for use, just turn the Quick Release™ Cord Wrap downward to remove the cord from the cord wrap.

Cleaning Formulas for Floor Cleaner Mop 2039 SERIES

WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the hard floor device.

Keep plenty of SpinWave™ formulas on hand so you can clean your sealed hard floors whenever it fits your schedule.
Always use SpinWave™ formulas in your machine. Other solutions may harm the machine and may void the warranty.

bissell_spinwave_floor_cleaner_mop_2039_series-spinwaveâ¢_formulas.png

Attaching Mop Pads

Your BISSELL SpinWave™ may have come with two different mop pads:

bissell_spinwave_floor_cleaner_mop_2039_series-attaching_mop.png

The Soft Touch Pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The Scrubby Pad is best used to power through tough, sticky messes.

Your SpinWave™ may have come with mop pads attached. If not, to attach mop pads, carefully lay machine down on the floor.
Your SpinWave™ may have come with mop pads attached. If not, to attach mop pads, carefully lay machine down on the floor.
NOTE: These next steps are to help you apply the mop pads more accurately onto the machine.
First, fold the pad in half, making sure the cloth material is inside the fold.
Then, with the mop pad folded, line up the small dot in the center of the pad with the middle screw on the bottom of the foot.
Lastly, line up the edge of the mop pad with the inner ring on the foot, attaching the mop pad to the hook and loop material on the bottom of the foot.

Filling Your Clean Water Tank

The clean water tank is located on the front of the machine.
Lift the clean water tank straight up to remove from the machine.
Unscrew the cap from the clean water tank. The clean water tank has two measuring volumes depending on the amount of space you would like to clean.
For large area cleaning:
- Fill formula tank with warm tap water to the second water fill line.
- Then add BISSELL® SpinWave™ formula to the second formula fill line.
  For small area cleaning
  - Fill formula tank with warm tap water to the first water fill line.
  - Then add BISSELL® SpinWave™ formula to the first formula fill line.
Screw the cap back onto the clean water tank.
Slide the clean water tank back into place until you hear a click.

bissell_spinwave_floor_cleaner_mop_2039_series-screw_the_cap.png

A few notes about filling the clean water tank:

Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE.

Cleaning Your Sealed Hard Floors

ATTENTION: This machine is designed to be used only on sealed hard floors and should not be used on carpet or rugs. For best cleaning results, sweep or vacuum the floor surface prior to using the BISSELL SpinWave™. This is to avoid scratching or damaging floors from sharp debris.

Plug machine into a properly grounded outlet.
Press the ON/OFF button to start cleaning your sealed hard floors.
Recline the body of the unit backward to start the rotating mop pads.
TIP: You may feel a slight vibration when turning on the machine if the mop pads are not aligned correctly. Wait a few seconds for the pads to adjust themselves. If this doesn’t occur, turn the machine OFF and replace mop pads following the instructions in “Attaching Mop Pads” section.
To clean, push the SPRAY button to dispense solution.
Solution will spray out of the nozzle on the front of the foot. You should hear a soft buzzing noise each time you press the SPRAY button to indicate solution being dispensed.
TIP
- For optimum cleaning, perform overlapping cleaning strokes while dispensing cleaning solution. Care should be taken to not over wet the floor surface, especially when cleaning wood and other delicate floor surfaces.
- When cleaning near baseboards, edges, or furniture you may feel a from the unit due to bouncing off the surface.
For more difficult and stuck on messes, spray solution directly on mess and line up one of the mop pads parallel to the mess. Move mop pad over mess and slowly move machine back and forth to clean, continuing to spray solution as needed.
NOTE: When finished cleaning, make sure to push the OFF button before standing the machine upright as the mop pads will continue to spin until the machine is turned OFF.

bissell_spinwave_floor_cleaner_mop_2039_series-stuck_on_messes.png

Cleaning Your SpinWave™

WARNING

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Do not set the machine on carpet, rug, or other fabric surface when mop pad is removed as hook and loop material on foot may damage them.
Do not store machine on wet mop pads as they may damage wood or other delicate floors.

Turn machine OFF and unplug the machine from the grounded outlet.
To remove mop pads, simply pull pads off the hook and loop material on the bottom of the machine.
Machine wash separately in warm water. Use only liquid detergents. Do not use bleach or fabric softener. Tumble dry on low. Do not iron. Do not dry clean.
Wrap cord around the Quick Release™ Cord Wrap and the Lower Cord Wrap. Clip molded plug to power cord.
Store upright in a dry protected area until the next use. Since this product uses water, it must not be stored where there is danger of freezing. Freezing will damage internal components and may void the warranty. Store with dry mop pads. Wet mop pads may damage wood and other delicate, sealed hard floors.
NOTE
- Any solution remaining in the clean water tank should be emptied prior to machine storage.
- Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is danger of freezing. Freezing may damage internal components and void the warranty.

bissell_spinwave_floor_cleaner_mop_2039_series-wrap_cord.png

Detailed Description of Bissell SPINWAVE Floor Cleaner Mop

The Bissell SPINWAVE Floor Cleaner Mop 2039 SERIES is a revolutionary cleaning tool that combines the power of steam with the convenience of a mop. With its swivel head and adjustable steam control, this mop can easily maneuver around furniture and adjust to different floor types. The on-demand spray feature allows for targeted cleaning, while the reusable microfiber pads are not only eco-friendly but also effective at picking up dirt and grime. The integrated scrubbing brush is perfect for tackling tough stains, and the large water tank means you can clean for longer periods of time without having to refill. Plus, the cordless design allows for added convenience and flexibility.

Pros & Cons

Pros:

Versatile and powerful cleaning
Customizable steam control
Eco-friendly microfiber pads
Integrated scrubbing brush for tough stains
Cordless design for added convenience

Cons:

May be too bulky for some users
On the pricier side compared to other mops
May require frequent water refills for larger cleaning jobs

Troubleshooting

WARNING: To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

Problem	Possible causes	Remedies
Unit is vibrating/ wobbling	Mop pads are not aligned with foot	Realign the mop pad son the foot
Cord is in way when cleaning	Cord is not clipped in in-use cord clip	Clip the cord in in-use cord clip
Reduced spray OR no spray	Clean water tank may be empty	Refill tank
	Clean water tank may not be seated completely	Turn power OFF; Remove and reseat tank
	System isn’t completely primed	Hold trigger for 10 to 15 seconds to make sure the solution has flowed to the spray tips
	Not holding trigger to spray solution	Hold trigger continuously while using the machine
	Spray tips on foot clogged	Turn power OFF; Use a pin to clean the spray tip located front and center of the machine.
Spin plates are not turning or are wobbling	Mop pads are not installed properly	Turn Power OFF; Unplug machine and follow instructions on page 6 for replacing mop pads
Spin plates are not turning or are wobbling	Machine is standing upright	Recline machine
No power	Cord damage	While unplugged, inspect the full length of the cord for damage and refer to a qualified technician if there is damage
	Handle not properly in place	Remove handle and click back into body; To remove handle: Hold base of machine withyour foot, then insert screwdriver into the slot beneath the cord wrapto disengage handle tab from body Use other handto hold metalpole and pull upward to take handle off To click handle back into body, see page 5
	Outlet not working	Test outlet with a small appliance like a cell phone charger, and use another outlet if needed
	Fuse/breaker outlet blown	Reset the breaker
Machine is leaking	Cap of clean water tank is not closed properly	Remove the clean water tank and re-apply the cap

Warranty

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail.

Limited Two-Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years any defective or malfunctioning part.

Customer Reviews

Customers have praised the Bissell SPINWAVE Floor Cleaner Mop 2039 SERIES for its powerful cleaning capabilities and customizable features. However, some have noted that the mop can be a bit bulky and heavy, making it difficult to maneuver for extended periods of time. Additionally, some users have reported issues with the battery life, noting that it can drain quickly during longer cleaning sessions. Overall, though, customers have been overwhelmingly positive about the product, noting that it is well worth the investment for a deep clean.

Search Manuals in: 2039-series

Read More