Introduction

The OTC Stinger 20 Tons Bottle Jack 9320 is a robust and reliable lifting tool designed for heavy-duty automotive and industrial applications. Capable of lifting up to 20 tons, this bottle jack features a durable steel construction that ensures longevity and stability during use. Priced at $129.99, the 9320 is equipped with a safety overload system to prevent misuse and a convenient carrying handle for easy transport. Its compact design makes it an essential addition to any workshop or garage, providing powerful lifting capabilities when you need them most.

OTC Stinger 20 Tons Bottle Jack 9320 Parts List

Item No.	Qty.	Description
1	1	Body Assembly
2	1	Cap
3	1	Bolt
4	2	* O-ring
5	1	Safety Valve Spring
6	1	Ball Seat
7	2	Steel Ball
8	1	* Oil Filler Plug
9	1	Retainer Ring
10	1	* O-ring
11	1	* Sealing Washer
12	1	Piston Rod Part
13	2	* Bushing
14	1	* O-ring
15	1	Snap Ring
16	1	* O-ring
17	1	* Nylon Gasket
18	1	* Dustproof Ring
19	1	Pump Plunger
20	2	Shift
21	3	Pin
22	1	Rod Join
23	1	Pin
24	1	Handle Socket
25	1	†¥ Front Handle
26	1	†¥ Middle Handle
27	1	†¥ Rear Handle
28	1	Screw
29	2	* Copper Washer
30	2	Spring
31	3	Steel Ball
32	1	Release Rod
33	1	Screw
		* Included in SEAL KIT 566226
		† Included in HANDLE KIT 566163 for 9312
		¥ Included in HANDLE KIT 564020 for 9320

Specifications

Capacity: 20 tons (44,000 lbs)
Minimum Height: 9.5 inches
Maximum Height: 18.5 inches
Base Diameter: 10 inches
Saddle Diameter: 2.5 inches
Material: High-strength steel
Certifications: Meets or exceeds ASME B30.1 standards

Description

The OTC Stinger 20 Tons Bottle Jack 9320 features a compact and robust design, making it easy to maneuver in tight spaces. The high-strength steel construction ensures durability and resistance to wear and tear. The jack's hydraulic system is designed for smooth and efficient lifting, reducing the effort required to lift heavy loads. The base and saddle are engineered for stability and safety, providing a secure lifting platform.

This bottle jack is also equipped with safety features such as overload protection and a bypass valve to prevent over-extension. The ergonomic handle provides comfortable operation, even in demanding environments.

Bottle Jack

Max. Capacity

9312 - 12 Tons
9320 - 20 Tons

These instructions have been written to help the user more effectively use and maintain OTC jacks. Some of the information applying to construction, installation, operation, inspection, and maintenance of hydraulic jacks was selected from ANSI B30.1 and ASME/ANSI PALD-1. It is strongly recommended that the user read these two documents, which may be ordered from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th, New York, New York 10017.

Operating Instructions

WARNING: Failure to heed the following warnings can result in personal injury and/or equipment damage. These warnings cannot cover every situation. Have safety foremost in your mind when setting up a job.

Read, understand, and follow the operating instructions, and the ANSI B30.1 and ASME PALD-1 safety standards for jacks. If the operator cannot read English, operating instructions and safety precautions must be read and discussed in the operator's native language.
Wear eye protection that meets the requirements of ANSI Z87.1 and OSHA.
Inspect the jack before each use; do not use the jack if it is damaged, altered, or in poor condition.
To prevent tipping, set up the jack on a hard, level surface. Set vehicle parking brake and block tires.
The load must not exceed the rated lifting capacity of the jack. Lift only dead weight.
Center the load on the jack saddle, because off-center loads can damage seals and cause hydraulic failure.
Use the jack for lifting purposes only. This jack is designed to LIFT loads, NOT SUPPORT loads. Immediately support a lifted load with jack stands.
Stay clear of lifted loads.
Use only approved hydraulic fluid, such as Chevron AW Hydraulic Oil MV or equivalent.

Instructions

To raise the jack, use narrow end of jack handle to tighten release valve clockwise (CW). Insert handle into socket, and operate pump.
To lower the jack, slowly open the release valve knob by turning it counterclockwise (CCW).
To use the jack in a horizontal position, use Figure 1 to determine how to use the jack in a horizontal position.

Setup Guide

Ensure the area is clear of any obstructions and the surface is level.
Position the jack under the load, aligning the saddle with the lifting point.
Pump the handle to raise the jack until it contacts the load.
Continue pumping until the desired height is reached. Always use jack stands for added safety.
To lower the jack, slowly release the pressure by turning the release valve counterclockwise.

Troubleshooting

If the jack does not lift or lowers slowly,

Check for air in the hydraulic system and bleed it if necessary.
Ensure all connections are secure and there are no leaks in the system.
If the jack over-extends or shows signs of instability, stop immediately and reposition it.
Always follow the manufacturer's instructions and safety guidelines to avoid accidents.

Regular maintenance includes checking for wear and tear, lubricating moving parts, and ensuring all safety features are functioning correctly.

OTC Stinger 20 Tons Bottle Pros & Cons

Pros

High lifting capacity of 20 tons
Durable high-strength steel construction
Compact design for ease of use in tight spaces
Ergonomic handle for comfortable operation
Meets or exceeds ASME B30.1 standards for safety

Cons

Higher cost compared to lower-capacity jacks
Requires regular maintenance to ensure performance
May be heavier and more difficult to move than smaller jacks

Customer Reviews

Customers have praised the OTC Stinger 20 Tons Bottle Jack 9320 for its reliability and strength. Many users have noted its ease of use and the comfort provided by the ergonomic handle. However, some users have mentioned that it is heavier than expected and requires more effort to move around.

Common complaints

Including the need for frequent maintenance to keep the jack in optimal condition and the higher cost compared to other models on the market.

Search Manuals in: 9320

Read More