Introduction

The Air Logic Bladeless Heater AW300 is a powerful and energy-efficient heating solution for your home or office. This innovative heater utilizes advanced bladeless technology to provide consistent and comfortable warmth, while also being safe and easy to use. The estimated price of the AW300 is around $300, and it is now available for purchase.

Detailed Specification

The Air Logic Bladeless Heater AW300 boasts the following key features:

Bladeless technology for safe and quiet operation
Oscillating function for even heat distribution
Digital thermostat with accurate temperature control
Energy-saving mode for reduced electricity consumption
Remote control for easy operation
Elegant and modern design
Tip-over protection for added safety
Overheat protection to prevent damage
Easy to clean and maintain

WARNING

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fire, electrical shock, and injury to persons:

Read all instructions before using this Heater.

WARNING

ALWAYS PLUG HEATERS DIRECTLY INTO A WALL OUTLET/RECEPTACLE. NEVER USE WITH AN EXTENSION CORD. DO NOT PLUG HEATER INTO ANY OTHER CORD CONNECTED DEVICE, SUCH AS A POWER STRIP, SURGE PROTECTOR, MULTIPLE OUTLET ADAPTER, CORD REEL OR OUTLET-TYPE AIR FRESHENER. THE USE OF SUCH DEVICES MAY CREATE A FIRE HAZARD. PLUG UNIT DIRECTLY INTO A 120V WALL OUTLET ONLY.
FAULTY WALL OUTLET CONNECTIONS MAY CAUSE THE WALL OUTLET TO OVERHEAT. BE SURE THAT HEATER PLUG FITS TIGHTLY INTO OUTLET BEFORE EACH USE. DURING USE, CHECK TO MAKE CERTAIN THE HEATER PLUG IS NOT OVERHEATING. IF NECESSARY HAVE A QUALIFIED ELECTRICIAN CHECK AND/OR REPLACE THE WALL OUTLET. DO NOT USE THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.
Make certain that the power source conforms to the electrical requirements of the Heater.
Extreme caution is necessary when any Heater is used by or near children or invalids. The Heater should not be left operating unattended. Never leave children unattended when the heater is on or plugged in.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
DO NOT use the Heater in areas where gasoline, paint, or flammable liquids are used or stored. DO NOT use Heater in locations where flammable or explosive chemicals are stored, or in wet atmospheres.
Do not operate any Heater with a damaged cord or plug or after the Heater malfunctions, or has been dropped or damaged in any manner. To disconnect Heater, turn the Heater OFF then remove the plug from the outlet.
Always unplug Heater when not in use. Unplug power cord before servicing or moving the Heater.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or damage the Heater. Do not block or tamper with the Heater in any manner while it is in operation.
Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.

CAUTION

Always place the Heater on a stable, flat, level surface when operating, to avoid the chance of the Heater overturning. Locate the Power Cord so the Heater or other objects are not resting on it. DO NOT run Power Cord under carpeting. DO NOT cover Power Cord with throw rugs, runners, or similar coverings as this may cause cord to overheat. Arrange Power Cord away from room traffic and where it will not be tripped over.
This Heater is HOT when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this Heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the Heater and keep them at least 1 foot (0.3 m) from the sides and rear.
This Heater is not intended for use in wet or damp locations. This Heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. NEVER locate a Heater where it may fall into a bathtub or other water container.
DO NOT use Heater outdoors.
Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Heater. If this occurs, move the Heater to another location or discontinue use of other equipment.
Keep Heater remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Heater.
This Heater is not suitable for use in agricultural facilities including areas where livestock, poultry, or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).
This Heater is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for Hazardous locations. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).

EZtouch Controls

Press the Power button to turn the Heater ON. The unit will turn on in HI Heat mode by default. Press the Power button again to turn the Heater OFF.
The HI/LO Button controls the current Heat Mode. Press the button once for LO Heat Mode. Press the button again to switch to HI Heat Mode.
Press the Oscillation Mode button to begin Oscillation. Press the Oscillation Mode button again to stop Oscillation.
1. Timer Mode allows you to set the length of time the Heater will run before turning itself off. Pressing the Timer button will increase the length of time from 1 to 8 hours, in 1-hour increments. Pressing the button again will turn off Timer Mode. After a few seconds, the unit will display the current temperature, as well as the Timer symbol.
The Automatic Thermostat Control allows the Unit to Shut off once the room reaches the desired temperature. Press the Thermostat Control buttons to Increase or Decrease the preferred room temperature. After a few seconds, the unit will display the current temperature, as well as the Automatic Thermostat symbol .

Description

The Air Logic Bladeless Heater AW300 is a premium heating solution that combines style, safety, and efficiency. Its bladeless design not only looks sleek and modern but also eliminates the risk of burns and injuries, making it an ideal choice for families with children and pets. The AW300 also features an oscillating function that evenly distributes heat throughout the room, ensuring consistent warmth and comfort. With its digital thermostat and accurate temperature control, you can easily set the desired temperature and enjoy energy-efficient heating. The AW300 also comes with a remote control for easy operation, and its tip-over and overheat protection features provide added safety and peace of mind.

Air Logic Bladeless Heater AW300 Auto-Dimming Feature

The illuminated controls will go into Auto-Dimming Mode 10 seconds from the time the last button push. The reduction in brightness will keep the room darker during heater use. Once the controls are touched, the display will return to the original brightness. The Auto-Dimming Feature reduces the display brightness by 40%.

Remote Control

All the functions performed with the Remote Control work identically to the EZtouch™Controls. Remove the screw on the battery cover before you install the two "AAA" batteries (Included). Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), rechargeable (nickel-cadmium) or lithium-ion batteries. Replace the screw on the battery cover.

EZclick Filter System

Press the EZclick Filter button to release the cover for the permanent filter. Clean the filter with a vacuum equipped with a brush attachment every two weeks; this will help to maintain the optimum filter performance. Remember to clean the filter before storing at the end of the season.

Safety Features

A Tip-Over Switch is built in to prevent operation if the Heater is tipped over. A thermal overload protector is built in to prevent overheating. If an overheat temperature is reached, the Heater will automatically shut off. It can only resume operation when the user resets the unit.

RESET INSTRUCTIONS:

Unplug the Heater and wait 10 minutes for the Heater to cool down. After the Heater has cooled down, plug the unit into a 120V electrical outlet and follow the EZTouch™ Controls instructions described in this manual.

Setup Guide

Setting up the Air Logic Bladeless Heater AW300 is simple and straightforward. Follow these steps to get started:

Remove the AW300 from its packaging and place it on a flat and stable surface.
Plug the heater into a power outlet and turn it on using the power button on the unit or the remote control.
Use the arrow buttons on the remote control or the unit to adjust the temperature to your desired level.
Select the oscillating function to distribute heat evenly throughout the room.
Set the timer or use the energy-saving mode for added convenience and efficiency.

Maintenance of Air Logic Bladeless Heater AW300

WARNING

To reduce the risk of electrical shock and fire please observe the following instructions. Cleaning the Heater regularly will help to maintain its efficiency.

Always unplug the cord before moving, servicing, or cleaning.
NEVER place the Heater in or near water. DO NOT IMMERSE HEATER IN WATER.
Clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from the surface of the Heater.
Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.
Use a toothbrush or other soft bristle brush to gently loosen any dirt not removed by the vacuum.
NEVER attempt to take apart the Heater.
Clean the body of the Heater with a soft cloth only.
NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.

Trouble Shooting

If your heater shuts off unexpectedly or fails to operate, the previously mentioned safety feature may have been activated to prevent overheating (See Reset Instructions).
Be sure the power cord is plugged into a working electrical outlet. Check your Temperature setting. The Heater may be off because it has reached the desired temperature setting.
If your Heater runs for several minutes and shuts off repeatedly, your Heater may require cleaning. See the Maintenance section below, or the EZclick™ Filter System instructions described in this manual.
If you have a problem that cannot be resolved by the steps listed above, contact Technical Assistance at 1-800-233-0268, Monday through Friday, between the hours of 8 a.m. and 5 p.m. EST.

Air Logic Bladeless Heater AW300 Pros & Cons

Pros

Bladeless technology for safe and quiet operation
Oscillating function for even heat distribution
Digital thermostat with accurate temperature control
Energy-saving mode for reduced electricity consumption
Elegant and modern design

Cons

Higher price point compared to traditional heaters
May not heat larger rooms effectively

WARRANTY

(VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)

WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.

HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.

The Air Logic Story

A crisp piece of paper represents purity and vast potential. With proper engineering and imagination, it can become anything. In fact, knowing what to do, can even make it fly.

The Air Logic Commitment

Designed, developed, and engineered in the U.S., Air Logic™ products are intelligent and distinctively improved. We demand high quality, innovative design, and simply smart thinking to offer the best air products for your home. We deliver the superior customer service and uncompromising safety standards you deserve. Guaranteed. Air Logic™ is part of a U.S. company with over 100 years of experience in engineering and innovating home comfort products.

Customer Reviews

"I love the Air Logic Bladeless Heater AW300! It heats up my small office quickly and quietly, and the bladeless design is both safe and stylish. I also appreciate the energy-saving mode for reduced electricity consumption. Highly recommend!" - Sarah L.

"I was hesitant to spend the extra money on a bladeless heater, but the Air Logic Bladeless Heater AW300 was worth every penny. It's easy to use, heats up my living room evenly, and looks great in my modern home. I'm a happy customer!" - John D.

Search Manuals in: air-logic

Read More