Shure AO 6008 Audio Output: Comprehensive Product Manual and Guide

Introduction to Shure AO 6008 Audio Output

The Shure AO 6008 Audio Output is a professional-grade 8-channel analog output module designed for the DCS 6000 Digital Conference System, delivering exceptional audio performance in demanding environments like international conferences, multilingual events, and large-scale meetings. This versatile shure AO 6008 Audio Output unit outputs eight transformer-balanced, ground-lifted floor or language channels to IR language distribution systems, RF transmitters, recording devices, web-streaming setups, and loudspeaker systems, supporting up to 31 digital channels including the floor channel.[1][2][4]

Key benefits include cost-effective Cat-5e structured cabling with no local power required (powered via 24-48V DC over DCS-LAN), headphone monitoring via dual jacks (3.5mm and 1/4-inch), and precise audio control with a 4x20 character LCD display, menu push buttons, and audio adjustment controls. Audio specs shine with a frequency response of 20Hz-16kHz, THD under 0.05%, dynamic range over 90dBA, and maximum XLR output of +15dBm at 600Ohm load, ensuring crystal-clear sound for interpretation and distribution.[1][2]

Ideal for AV integrators, conference organizers, and interpretation professionals, the Shure AO 6008 Audio Output excels in setups needing reliable multichannel audio routing, such as UN assemblies or corporate boardrooms. Its compact 19-inch rack-mountable design (3.5 x 16.7 x 12.5 inches, 10.1 lbs) fits seamlessly into professional installations. Estimated price range is $2,500-$3,500 USD, available through authorized Shure distributors like Van Domburg Partners or Reverb marketplaces.[4][5] Whether for Shure AO 6008 Audio Output setup in conference systems or streaming, it offers scalable, upgradeable performance compliant with ISO 20109 standards.[3]

Troubleshooting Shure AO 6008 Audio Output: Common Issues and Fixes

Encountering problems with your shure AO 6008 Audio Output? Start with basic checks: Ensure DCS-LAN RJ45 connections are secure with auto-termination enabled, and verify power supply (5W consumption via 24-48V DC).[1][2] Common issues include no audio output—check XLR cables for ground loops (transformer-balanced outputs prevent this) and confirm channel selection on the LCD menu (e.g., Out A at -12dB for IT 6108 IR transmitter pairing).[2]

No signal on outputs: Navigate LCD menu to verify channel assignment (e.g., 12POL, 13ALB); reset counters if Tx Dropped errors appear. Solution: Set levels to -6dB nominal.[2]
Distorted audio (THD >0.05%): Adjust gain via push buttons; ensure load >600Ohm on XLR or >32Ohm on headphones. Frequency response issues? Confirm 20Hz-16kHz alignment.[1]
LCD/menu unresponsive: Power cycle via CU 6011 central unit; use SW 6000 software for remote config.[2]
Cross-talk or low SNR (<90dBA): Isolate Cat-5e cabling; preventive measure: Use shielded RJ45 ports.[1]

Prevent issues with regular firmware updates via Shure software and proper rack ventilation. Shure offers a standard 2-year warranty; contact Shure support at support@shure.com or +1-847-600-2000 for RMA. For DCS 6000-specific help, visit Shure's AO6008 user guide PDF.[2]

Pros and Cons of Shure AO 6008 Audio Output

Pros

Superior audio quality: 20-bit/32kHz sampling, >90dBA SNR, and balanced XLR outputs deliver pristine multichannel sound for IR distribution and recording—ideal for 8 simultaneous language channels.[1][2]
Easy integration: Cat-5e DCS-LAN powering eliminates extra PSUs; rack-mountable with intuitive LCD/menu controls, configurable via PC software.[1][3]
Versatile monitoring: Dual headphone jacks for real-time checks, supporting loads >32Ohm.[1]
Value for money: At $2,500-$3,500, it outperforms basic mixers in pro conference scalability vs. alternatives like basic analog distributors.[4][5]

Cons

Conference-system dependent: Optimized for DCS 6000; limited standalone use without CU 6011.[3][5]
Menu complexity: Steep learning curve for non-experts; requires manual level tweaks (e.g., -12dB for IT 6108).[2]
Weight and size: 10.1 lbs may challenge portable setups vs. lighter competitors.[1]

Overall, the Shure AO 6008 Audio Output offers excellent ROI for pro AV, edging out rivals like generic 8-channel units in audio fidelity and integration.[1][4]

Customer Reviews: Real User Feedback on Shure AO 6008 Audio Output

Users rave about the shure AO 6008 Audio Output's reliability in high-stakes environments, averaging 4.7/5 stars across pro AV forums and reseller sites like Reverb and Van Domburg.[4][5] "Flawless for UN-style multilingual conferences—8 clean channels to IR without latency," praises a Brussels event tech (5/5).[5]

Praises: "Transformer-balanced outputs kill hum; headphone monitoring is a game-changer" (4.8/5, integrator).[1][2]
Common complaints: "Menu navigation tricky initially; needs DCS ecosystem" (one 3/5 review notes setup time).[2]

Testimonial: "Paired with DT 6008 transmitter, perfect for web-streaming—SNR exceeds specs!" (5/5, streamer).[3][5] Frequently mentioned: Rock-solid for Shure AO 6008 troubleshooting in conference audio distribution, with 90% recommending for pros. Address issues via Shure guides for seamless use.[2][6]

Search Manuals in: ao-6008

Read More