Delta Children Simmons Auto Glide Bassinet 701405 Introduction

The Delta Children Simmons Auto Glide Bassinet 701405 is a popular choice for parents who want a safe and comfortable place for their newborn to sleep. This bassinet features a soothing motion that can be operated with just a push of a button, allowing parents to easily rock their baby to sleep. The estimated price of this product is around $160, and it is currently available for purchase.

Bassinet 701405 Parts

IMPORTANT! Please remove all parts from the package and identify them before assembly.

parts_delta_children_simmons_auto_glide_bassinet_701405.png

Hardware
Screws are shown in actual size - 10 total screws

delta_children_simmons_auto_glide_bassinet_701405.hardware.png

Detailed Specifications

The Delta Children Simmons Auto Glide Bassinet 701405 has the following key features:

Soothing motion with auto-glide technology
Easy push-button operation
Spacious storage basket for baby essentials
Machine-washable, soft, and cozy fabrics
Lightweight and easy to move around the house
JPMA certified to meet or exceed all safety standards
Designed for newborns up to 15 pounds
Includes a one-inch waterproof mattress pad and a fitted sheet

Delta Children Assembly Instructions

Top Frame Assembly

NOTE: You may need the help of another adult for assembly.

NOTE: Make sure front of frame is aligned with top front mattress support

Place the frame on a flat surface and extend the support legs out. 1
Locate the mattress support board and align the front of frame to top of support board front. 2
Align and insert the (4) support legs into the (4) support board housings until they “click” in place. 3

NOTE: Pull upward to make sure support legs are fully locked.

Attaching Power Housing to Front Base Leg

Locate the auto-glide housing, front base leg with power connection, two (x2) M6 x 3.5cm screws and a Phillips screwdriver.
Align the auto-glide housing nub post to the center hole inside the base leg.
Next using a Phillips screwdriver, tighten two (x2) M6 screws on the opposite sides of the base leg.
Pull outward on the auto-glide housing to make sure it is securely attached.

Front Base Leg and Frame Assembly

Locate the two (x2) M6 screw, a Phillips screwdriver, and the front base leg.
Insert the two (x2) M6 screw to the assembled front base leg and use the Phillips screwdriver to tighten on both sides.

NOTE: Align the front base leg so that the power housing is facing inside of the bassinet.

Back Base Leg and Frame Assembly

NOTE: You may need the help of another adult for assembly.

Locate the two (x2) M6 screw, a Phillips screwdriver, and the back base leg.
Insert the two (x2) M6 screw to the back base leg and use the Phillips screwdriver to tighten on both sides.

Storage Basket Assembly

Locate the two (x2) support tubes, and the fabric storage liner.
Slide the support tubes into fabric storage liner on both sides.
Flip over the fabric storage liner with support tubes, facing upward.
Locate the four (x4) M6 x 1.7cm screws and a Phillips screwdriver
Insert the (x4) M6 screws on both sides of the legs and use a Phillips screwdriver to tighten both screws on both sides.

NOTE: Pull side support tube to make sure it’s fully fastened.

Locking Casters Assembly

Locate the four (x4) locking casters and insert into (4) bottom leg joints.
Insert the casters into the base legs. Push down until you hear the caster “CLICK” into place.
Pull upward on the caster to assure it is properly attached to the bassinet.

*Once casters are assembled, turn the assembly bassinet upright.

Description of Delta Children Simmons Auto Glide Bassinet 701405

The Delta Children Simmons Auto Glide Bassinet 701405 is a stylish and functional bassinet that is designed to provide a safe and comfortable sleeping environment for newborns. Its soothing motion, operated with just a push of a button, can help babies fall asleep faster and stay asleep longer. The spacious storage basket underneath the bassinet provides ample space for baby essentials, making it easy for parents to keep everything they need within reach. The soft and cozy fabrics are machine-washable, ensuring that the bassinet stays clean and fresh. With its lightweight design and easy-to-move wheels, this bassinet can be easily moved from room to room, allowing parents to keep a close eye on their baby at all times.

Setup Guide

Setting up the Delta Children Simmons Auto Glide Bassinet 701405 is a simple and straightforward process:

Unfold the bassinet and make sure all parts are securely locked in place.
Attach the canopy by aligning the posts with the corresponding holes and snapping them into place.
Insert the mattress pad and fitted sheet into the bassinet, making sure they are secure and flat.
Plug in the power cord and test the auto-glide motion to make sure it is working properly.
Place the bassinet on a flat and stable surface, and make sure it is not close to any loose cords or hanging objects.

Simmons Auto Glide Bassinet Attaching Music Module

To attach Music Module, remove the screws and line up music module to screw holes on front frame.
Position Music Module onto front of frame and screw module to frame.

Music Module Operation

Press again to stop auto glide.
Activate bassinet light by pressing LIGHT button on the top of the music module.
NOTE: Light will stay on in 10-minute cycles, unless button is pressed before 10 minutes are up.
- Press Auto Glide button ( ) to start 15 minute cycle of auto glide.
  - Press MUSIC button () on top of the music module to activate MUSIC. Press button multiple times to cycle through three (3) music melodies.
Volume can be adjusted with UP/DOWN buttons on the top of the music module.

Attaching Fabric

Locate the fabric liner.
NOTE: Front of the frame has the music module and the front of the liner has the warning label.
Align the fabric hole over the music module.
Place the liner onto the frame. Make sure warning is centered at the front of the bassinet.
Stretch the pockets on the bottom of the liner around the ends of the mattress support.
Lift the skirt on the liner, snap all (8) of the straps around the top tube of the frame and all (4) snaps to the underside of the mattress boards.
Place the sheet over the mattress pad.
Place the covered mattress pad into the liner.
Position the canopy over the top end of the bassinet opposite the warning label.
Push aside foam to expose metal and push the canopy ratchet onto the frame on both sides of the bassinet.
Fasten the hook and loop fasteners on the back edge of the canopy to the liner. Then fasten the hook and loop patches on each canopy flap to the side of the liner.

Wire Connection Assembly

Lift the fabric on the front of the bassinet.
Locate the auto-glide housing plug cord and insert it into the auto-glide connector . (Fig. 1)
Locate the large plug cord and insert into the top leg connector . (Fig. 2)
Make sure both wires are fully connected (Fig. 1)
Locate the Power Cord. Insert underneath the fabric storage liner opening and plug into the Bottom Base Leg Connector (Fig. 2) until fully connected (Fig. 2A)

Care and Maintenance

The frame, mattress pad, storage basket, music module may be wiped clean using a mild cleaning solution and a damp cloth. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. Do not immerse the frame.
The sheet is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly.
Always store product in a clean and dry place.
Before each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or sharp edges. NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or
torn mesh/fabric. Check before assembly and periodically during use. Contact Simmons Customer Service Department at 1-646-435-8726 (8:00am ~ 4:30pm PST) for replacement parts, repair or instructions.

Simmons Auto Glide Bassinet 701405 Troubleshooting

If the auto-glide motion of the bassinet is not working properly, check the following:

Make sure the power cord is properly plugged in.
Check if the batteries are inserted correctly and are not dead.
Make sure there are no obstructions in the wheels or the base of the bassinet.
If the problem persists, contact the manufacturer's customer service for further assistance.

2 Years Warranty Of Protection

With Delta’s Extended Warranty, you’re covered for mechanical failure from normal use or if your item stops working due to normal wear and tear, plus all those unexpected surprises. registration Simply visit our Website, register your product, and add the Extended Warranty https://www.deltachildren.com/pages/product-registration

Simmons Auto Glide Bassinet 701405 Pros & Cons

Pros

Soothing motion that can help babies sleep better
Spacious storage basket for baby essentials
Lightweight and easy to move around
Machine-washable fabrics
JPMA certified for safety

Cons

Requires batteries or electricity to operate the auto-glide motion
Can be a bit noisy when in use
Some parents may find it to be a bit small for their baby's size

Customer Reviews

Parents love the Delta Children Simmons Auto Glide Bassinet 701405 for its soothing motion and easy-to-use design. Many have commented on how it has helped their babies sleep better and longer, and how the spacious storage basket is a great feature for keeping baby essentials organized. However, some have noted that the bassinet can be a bit noisy when in use, and that it can be a bit small for larger babies. Overall, parents give this bassinet a high rating for its functionality and style.

Most Common about Delta Children Simmons Auto Glide Bassinet 701405

The most common complaints about the Delta Children Simmons Auto Glide Bassinet 701405 are its size and its noise level. Some parents have found it to be too small for their baby, while others have noted that it can be a bit noisy when in use. However, these issues are minor and do not significantly impact the overall functionality and performance of the bassinet.

Search Manuals in: bassinet-701405

Read More