Introduction of Summer Infant Warming Waterfall Bath 09530B

The Summer Infant Warming Waterfall Bath is a fantastic addition to any family's bath time routine. This innovative baby bath features a waterfall spout that provides a gentle and soothing stream of water for your little one. With a built-in heater that keeps the water at the perfect temperature, this bath is both safe and comfortable for your baby. The estimated price of this product is around $70, and it was launched in 2018.

Detailed Specifications

The Warming Waterfall Bath 09530B has the following key features

Adjustable water temperature control to keep the water at the perfect temperature
Waterfall spout for a gentle and soothing stream of water
Built-in digital timer to ensure safe bath time
Compact and portable design for easy storage and travel
Durable and easy-to-clean material

Components

Description

The Summer Infant Warming Waterfall Bath is designed to provide a safe, comfortable, and enjoyable bath time experience for both parents and babies. With its unique waterfall spout, this baby bath creates a calming and soothing ambiance that helps your little one relax and enjoy their bath time. The adjustable water temperature control ensures that the water is always at the perfect temperature, making bath time safer and more comfortable for your baby.
WARNING: IMPORTANT! KEEP FOR FUTURE REFERENCE!
Drowning Hazard: Babies have drowned while using infant bath tubs.
To prevent drowning

Stay in arm's reach of your baby.
Never rely on a toddler or preschooler to help your baby or alert you to trouble. Babies have drowned even with other children in or near bath tub.
Babies can drown in as little as 1 inch of water. Use as little water as possible to bathe your baby.
Use in empty adult tub or sink.
Keep drain open in adult tub or sink.
NEVER bathe baby until you have tested the water temperature. ALWAYS check water temperature before placing child into tub.
Bath water should be between 90°F and 100°F (32.2°C and 37.8°C).
This product is not a toy. DO NOT allow children to play with it.
NEVER submerge waterfall pump. If accidentaly submerged, remove batteries from compartment immediately and allow sufficient time to dry before replacing batteries.

Fall Hazard: Babies have suffered head injuries falling from infant bath tubs. To prevent falls

Place tub only in adult tub or sink.
Never lift or carry baby in tub.
Make sure all pieces are properly assembled before placing infant in product.
Never adjust product with infant inside the product. Remove infant before moving or making adjustments.
Never use on uneven or elevated surfaces.
NEVER leave children unattended.
Discontinue use of product if damaged, broken, or disassembled.

A BATTERY WARNING

Do not mix old and new batteries.
Do not mix alkaline, standard, or rechargeable batteries.
Remove batteries when product is stored for long period of time or when batteries are exhausted.
Dispose of exhausted batteries according to instructions.
Do not recharge non-rechargeable batteries.
Batteries are to be inserted with correct polarity.
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Keep all batteries away from children.

Setup of Warming Waterfall Bath

Setting up the Warming Waterfall Bath is easy and straightforward. Follow these steps to get started

Fill the bath with water up to the indicated maximum level.
Plug in the power cord and turn on the unit.
Set the desired water temperature using the adjustable control.
Place your baby in the bath and enjoy the soothing waterfall spout.

Battery Instalation

summer_infant_warming_waterfall_bath_09530b-installation.png

Waterfall sling with bolster and parent assist tray assembly

summer_infant_warming_waterfall_bath_09530b-assembly.png

Power on

toddler/full tub mode

summer_infant_warming_waterfall_bath_09530b-tub_mode.png

removing the parent assist tray

summer_infant_warming_waterfall_bath_09530b-assist_try.png

drain plug

warming wash cloth instructions

Submerge wash cloth in warm bath and place on top of babies shoulders, chest and tummy. Wash cloth keeps baby warmer longer.

To clean & store

Tub and Waterfall Sling: Clean with a damp cloth, mild soap, and warm water. Do not submerge the battery compartment in water or run a stream of water directly on it.
Bolster: Hand wash with mild color safe detergent.
Remove batteries before any long storage periods.
Warming wash cloth: wash before first use. Machine wash warm with like colors. Use non-chlorine bleach only, if needed. Tumble dry low.

Maintenance

Make sure all hose connections are tight. Make sure all screws on the battery compartment are tight.
Do not use product if any components are damaged.

Troubleshooting

Here are some common problems and solutions for the Warming Waterfall Bath

If the water is not heating up, check to make sure the power cord is securely plugged in and the unit is turned on.
If the water is too hot or too cold, adjust the temperature control to your desired setting.
If the waterfall spout is not working, make sure the unit is filled with enough water and the spout is properly aligned.

Search Manuals in: bath-09530b

Read More