Introduction

The Remote Oz AC Remote Controller RG66A2 is a versatile and user-friendly device designed to enhance your air conditioning experience. This remote offers a range of features, including multiple cooling modes, fan speed adjustments, and temperature control, allowing users to customize their comfort levels easily. Its ergonomic design ensures comfortable handling, and the clear display provides easy access to all functions. The cost of the RG66A2 remote controller is approximately $29.99.

Remote Controller Specifications

Model	RG66A2/BGEFU1
Rated Voltage	3.0V(Dry batteries R03/LRO3 x2)
Signal Receiving Range	8m
Environment	-5°C-60°C

NOTE:

Buttons design is based on a typical model and might be slightly different from the actual one you purchased, the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this feature, there is no corresponding operation that happened when pressing the relative button on the remote controller.
When there are wide differences between “Remote controller Illustration” and ” USER’S MANUAL” on function description, the description of “USER’S MANUAL” shall prevail.

The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details.

Function Buttons

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of this manual. NOTE: Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling-only appliance.

Handling The Remote Controller

NOT SURE WHAT A FUNCTION DOES? Refer to the How to Use Basic Functions and How to Use Advanced Functions sections of this manual for a detailed description of how to use your air conditioner.

SPECIAL NOTE

Button designs on your unit may differ slightly from the example shown.
If the indoor unit does not have a particular function, pressing that function’s button on the remote control will have no effect.

INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two AAA batteries. Put the batteries in the remote control before use:

Remove the back cover from the remote control, exposing the battery compartment.
Insert the batteries, paying attention to match up the (+) and (-) ends of the batteries with the symbols inside the battery compartment.
Install the back cover on.

INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall or stand by using a remote controller holder (optional part, not supplied with the unit).

Before installing the remote controller, check that the air conditioner receives the signals properly.
Install the holder with two screws.
Put the remote controller in the holder.

BATTERY NOTES
For optimum product performance:

Do not mix old and new batteries or batteries of different types.
Do not leave batteries in the remote control if you don’t plan on using the device for more than 2 months.

BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal of batteries.

TIPS FOR USING REMOTE CONTROL

The remote control must be used within 8 meters of the unit.
The unit will beep when a remote signal is received.
Curtains, other materials and direct sunlight can interfere with the infrared signal receiver.
Remove batteries if the remote control will not be used for more than 2 months.

inventer RG66A BGEF Remote Controller - fig

Remove the back cover to install batteries

inventer RG66A BGEF Remote Controller - fig 1

Put the remote controller in the holder.

Remote LCD Screen Indicators

Information are displayed when the remote controller is powered up.

inventer RG66A BGEF Remote Controller - Remote LCD

Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation, only the relative functional signs are shown on the display window.

Description

Controller RG66A2 boasts a sleek and ergonomic design, making it comfortable to hold and use. The backlit LCD display ensures that you can easily read the settings even in dark environments. The remote is powered by two AAA batteries, which are included in the package. It also features a durable construction that withstands regular use and minor drops.

Supports multiple operation modes, including cooling, heating, and fan-only modes. You can also set a timer to turn the air conditioner on or off at specific times, helping you save energy when you're not home. The sleep mode adjusts the temperature gradually to ensure a comfortable sleeping environment, while the turbo mode provides rapid cooling or heating when needed.

How To Use The Basic Functions

COOL operation

Press the MODE button to select COOL mode.
Set your desired temperature using the Temp + or Temp — button
Press the FAN button to select the fan speed.
Press the ON/OFF button to start the unit.

inventer RG66A BGEF Remote Controller - cool

SETTING TEMPERATURE

The operating temperature range for units is 17-30°C. You can increase or decrease the set temperature in 1°C increment.

AUTO operation
In AUTO mode, the unit will automatically select the COOL, FAN, HEAT or DRY mode based on the set temperature.

Press the MODE button to select Auto mode.
Set your desired temperature using the Temp + or Temp — button.
Press the ON/OFF button to start the unit.

inventer RG66A BGEF Remote Controller - fig 2

NOTE: FAN SPEED can’t be set in Auto mode.

FAN operation

Press the MODE button to select FAN mode.
Press the FAN button to select the fan speed.
Press the ON/off button to start the unit.

NOTE: You can’t set the temperature in FAN mode. As a result, your remote control’s LCD screen will not display the temperature.

inventer RG66A BGEF Remote Controller - fig 4

DRY operation(dehumidifying)

Press the MODE button to select DRY mode.
Set your desired temperature using the Temp + or Temp — button.
Press the ON/off button to start the unit.

NOTE: FAN SPEED can’t be changed in DRY mode.

inventer RG66A BGEF Remote Controller - fig 3

HEAT operation

Press the MODE button to select HEAT mode.
Set your desired temperature using the Temp + or Temp – button.
Press the FAN button to select the fan speed.
Press the ON/OFF button to start the unit.

inventer RG66A BGEF Remote Controller - fig 5

NOTE: As outdoor temperature drops, the performance of your unit’s HEAT function may be affected. In such instances, we recommend using this air conditioner in conjunction with other heating appliances.

Setting the TIMER function

Your air conditioning unit has two timer-related functions:

TIMER ON- sets the amount of timer after which the unit will automatically turn on.
TIMER OFF- sets the amount of time after which the unit will automatically turn off.

TIMER ON function
The TIMER ON function allows you to set a period of time after which the unit will automatically turn on, such as when you come home from work.

Press the Timer button, the Timer on indicator "" and time display.
Note: This number indicates the amount of time after the current time that you want the unit to turn on. For example, if you set TIMER ON for 2.5 hours, “2.5h” will appear on the screen, and the unit will turn on after 2.5 hours.
Press the Temp + or Temp - button repeatedly to set the time when you want the unit to turn on.
Wait 3 seconds, then the TIMER ON function will be activated. The digital display on your remote control will then return to the temperature display. The "" indicator remains on and this function is activated.

inventer RG66A BGEF Remote Controller - fig 6

Example: Setting unit to turn on after 2.5 hours.

TIMER OFF function
The TIMER OFF function allows you to set a period of time after which the unit will automatically turn off, such as when you wake up.

Press the Timer button, the Timer off indicator " " and the time display.
Note: This number indicates the amount of time after the current time that you want the unit to turn off.
For example, if you set TIMER OFF for 5 hours, " 5.0h " will appear on the screen, and the unit will turn off after 5 hours.
Press the Temp + or - Temp button repeatedly to set the time when you want the unit to turn off.
Wait 3 seconds, then the TIMER OFF function will be activated. The digital display on your remote control will then return to the temperature display. The " " indicator remains on and this function is activated.

inventer RG66A BGEF Remote Controller - fig 7

Example: Setting unit to turn off after 5 hours.

NOTE: When setting the TIMER ON or TIMER OFF functions, for up to 10 hours, the time will increase in 30-minute increments with each press. After 10 hours and up to 24, it will increase in 1-hour increments. The timer will revert to zero after 24 hours. You can turn off either function by setting its timer to ” 0.0h “.

Setting both TIMER ON and TIMER OFF at the same time

Keep in mind that the time periods you set for both functions refer to hours after the current time. For example, say that the current time is 1:00 PM, and you want the unit to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automatically turn off at 9:00 PM.
Do the following:

inventer RG66A BGEF Remote Controller - fig 8

Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off (see the figure below)

Your remote display

inventer RG66A BGEF Remote Controller - fig 9

Setup Guide

To set up the Remote Oz AC Remote Controller RG66A2,

Start by inserting the batteries into the remote. Ensure that the air conditioning unit is turned off before beginning the setup process.
Press and hold the "OK" button on the remote until the display lights up.
Use the navigation buttons to select your preferred language and unit of measurement (Celsius or Fahrenheit).
Next, pair the remote with your air conditioner by pressing and holding the "Pair" button on both the remote and the air conditioner until they sync up.
Once paired, you can start using the remote to control your air conditioner.

How To Use The Advanced Functions

ECO function

NOTE: This function is only available under COOL mode.

Used to enter the energy efficient mode. Under cooling mode, press this button, the remote controller will adjust the temperature automatically to 24OC, fan speed of Auto to save energy(but only if the set temperature is less than 24OC). If the set temperature is above 24OC , press the ECO button, the fan speed will change to Auto, the set temperature will remain unchanged.

NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less than 24OC will stop ECO operation. Under ECO operation, the set temper-ature should be 24OC or more. it may result in insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.

SLEEP Function

The SLEEP function is used to decrease energy use while you sleep (and don t need the same temperature settings to stay comfortable). This function can only be activated via remote control.

Note: The SLEEP function is not available in FAN or DRY mode.

Follow me function

The Follow me function enables the remote control to measure the temperature at its current location and send this signal to the air conditioner every 3 minutes interval. When using AUTO, COOL, or HEAT modes, measuring ambient temperature from the remote control (instead of from the indoor unit itself) will enable the air conditioner to optimize the temperature around you and ensure maximum comfort.

LOCK function

Press Turbo button and Self clean button simultaneously for one second to lock or unlock the keyboard.

TURBO function

The TURBO function makes the unit work extra hard to reach your present temperature in the shortest amount of time possible. When you select TURBO feature in COOL mode, the unit will blow cool air with strongest wind setting to jump-start the cooling process. When you select TURBO feature in HEAT mode, for units with Electric heat elements, the Electric Heater will activate and jump-start the heating process.

SHORTCUT function

Used to restore the current settings or resume previous settings.
Push this button when remote controller is on, the system will automatically revert back to the previous settings including operating mode, setting temperature, fan speed level and sleep feature (if activated).
If pushing more than 2 seconds, the system will automatically restore the current operation settings including operating mode, setting temperature, fan speed level and sleep feature (if activated ).

Silence function

Hold down Fan speed button for 2 seconds to activate/cancel Silent mode. Due to low frequency operation of compressor, it may result in insufficient cooling and heating capacity. (Applicable to the air conditioner with Silent feature only)

8OC Heating Function

When the air conditioner operates under heating mode with the set temperature of 17OC, press Temp button twice in one second will activate 8 Degree heating function. The unit will operate at a setting temperature of 8OC,. ,The i,,ndoor unit display shows FP .

Self clean function

Airborne bacteria can grow in the moisture that condenses around heat exchanger in the unit. With regular use, most of this moisture is evaporated from the unit. When the self clean feature is activated, your unit will clean itself automatically. After cleaning, unit will turn off automatically. You can use self clean feature as often as you like.
Note: You can only activate this function in COOL or DRY mode.

Troubleshooting

If you encounter any issues with your Remote Oz AC Remote Controller RG66A2, here are some common problems and solutions:

No Response from Air Conditioner: Check if the batteries are correctly inserted and have enough power. Ensure that the remote is paired correctly with the air conditioner.
Display Not Lighting Up: Replace the batteries or check for any blockages on the display screen.
Inaccurate Temperature Readings: Reset the remote by pressing and holding the "OK" and "Down" buttons simultaneously for 5 seconds.

Always follow the manufacturer's instructions and safety guidelines to avoid any potential hazards.

Remote Oz AC Remote Controller RG66A2 Pros & Cons

Pros:

User-Friendly Interface: Easy-to-use buttons and intuitive menu navigation.
Energy Efficiency: Features like timer and sleep mode help reduce energy consumption.
Durable Construction: Built to last with a robust design.
Long Battery Life: Up to 12 months of usage on a single set of batteries.

Cons:

Limited Range: Effective range is up to 10 meters, which may not be sufficient for larger spaces.
No Smart Home Integration: Does not support integration with smart home systems or voice assistants.
No Additional Sensors: Does not include sensors for humidity or air quality monitoring.

Customer Reviews

Customers have generally praised the Remote Oz AC Remote Controller RG66A2 for its ease of use and energy-saving features. Many users appreciate the backlit display and long battery life. However, some users have noted that the range could be better and that there is no integration with smart home systems.

Common complaints include occasional pairing issues and the lack of additional sensors for humidity or air quality monitoring.

Search Manuals in: bgefu1

Read More