Vitamix Container Blender 7500

The powerful Vitamix 7500 Container Blender makes healthy eating simple and tasty. Smoothies, soups, nut butters, and dough are easily blended with the blender's 2.2 horsepower motor. Its variable speed control and pulse feature allow accurate mixing, and its low-profile container fits beneath most kitchen cabinets. The Vitamix 7500, designed for durability and ease, produces high-quality results every time in any kitchen.

Please read all the safety information, warnings, and instructional material found in this booklet before getting started. Set your Vitamix machine on a dry, level surface. Make sure that the power switch is set to Off, and that the machine is plugged into a grounded electrical outlet. Then, prepare your machine for use. Always clean your machine before the first use.

Detailed Specifications

Motor: 2 peak output horsepower motor
Electrical: 120 V, 50/60 Hz, 12.0 A Uses a U.S.A. three–prong grounded cord.
Dimensions: Height: 17.5 in. / 44.5 cm Width: 7.25 in. / 19.5 cm Depth: 9.1 in. / 23.2 cm

Description

The Vitamix Container Blender 7500 is designed to handle a wide variety of blending tasks, from smoothies and soups to sauces, dips, and more. Its powerful motor and durable blades can handle even the toughest ingredients, ensuring consistent and even blending results every time. The variable speed control and pulse feature allow you to fine-tune your blending for the perfect texture, while the space-saving design and dishwasher-safe components make it easy to incorporate into your daily routine.

PARTS & FEATURES

Variable Speed Dial: The Variable Speed Dial selects blade rotation speeds from 1 to 10 (low to high).
Pulse Switch: The Pulse Switch will blend at the speed setting shown on Variable Speed Dial for as long as the Pulse Switch is held down.
Start/Stop Switch: Lifting the Start/Stop Switch to the Start position starts the rotation of the blades and begins the blending process.
2-Part Lid: Your new machine has our latest lid design. It is easy to put on and take off, and easy to clean. Always use the lid and the lid plug when the machine is in operation.
CAUTION: Lids and tampers are not interchangeable between different container styles, types, and sizes. Snap the lid onto the container and leave in place for a few minutes. Once the lid has been left on the container, it will be much easier to lock or remove.
Lid Plug: Insert through the lid and secure by turning clockwise. Remove the lid plug to use the tamper or add ingredients.

To Lock the Lid in Place

Position lid on container with lid flaps midway between the spout and the handle.
Push the lid onto the container until it locks in place.
The lid must always be secured when processing, especially hot liquids that may scald.

WARNING
Rotating Blades Can Cause Severe Injury. DO NOT reach into container while machine is running.

To Remove the Lid: Lift up on one lid flap while holding the container securely.

To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to “unlocked” position and lift out.

Container: Ounces, cups, and milliliters are clearly marked. A second dry blade container is available for purchase to grind grain and knead bread dough. The blade is marked “D.” Grinding grains will cloud the lower three inches (8 cm) of the container.

Tamper: The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot be processed in a regular blender. Using the tamper maintains circulation by preventing air pockets from forming. While the machine is running, and only through the lid plug opening, use the tamper to press ingredients into the blades as you make frozen ice creams and nut butters, or purée fruits and vegetables. Refer to “How to Use the Tamper” on page 10.

Automatic Overload Protection: Your Vitamix motor is designed to protect itself from overheating. If the motor shuts off, follow these instructions:

120 Volt machines: Turn off the power switch for up to 45 minutes to reset. Reset time will be extended if high room temperatures exist. To reduce the reset time, unplug the machine, remove the container, and blow air into the center section of the bottom with a hair dryer on the cool setting.
220 Volt machines: 220/240 motors are equipped with a reset button. If the motor shuts off, press the black reset button on the bottom of the machine.

On/Off Switch: The On/Off (or Power) Switch is on the right-hand side of the machine base. The On/Off Switch controls the power to the machine. The machine will not run when the On/Off Switch is in the Off position.

Power Cord: Your machine is equipped with a long power cord. Store the unused portion neatly underneath.

Bottom View / Cord Wrap: Plastic cord retainers hold the cord securely. There is no need to unscrew the cord retainers to let out more cord. They are flexible and return to position after the cord is lifted out.

ABOUT THE BLADES

The Vitamix machine comes standard with the wet blade container. The blade is identified by a “W” for wet. This blade is used for most of your recipes. Additional containers with wet or dry blades may be purchased separately.

WARNING
Rotating Blades Can Cause Severe Injury. DO NOT reach into container while machine is running.

Wet Blade Container: Designed for processing liquids, including juice, frozen mixtures, sauces, soups, purées, batters, and for wet chopping. The wet blades can also grind grain and knead dough, but they are not quite as efficient as the dry blades in this application. If used for grinding, your container will mar and become cloudy; see instructions for dry container use.

Dry Blade Container: These blades are clearly marked “D” and are designed specifically for grinding dry materials such as grains, cereal, and coffee, and are also used for kneading bread dough. The dry blades cannot process liquids efficiently. If you grind herbs on a regular basis, you may wish to purchase a separate dry blade container and replace blades as needed.

CAUTION Moving Parts May Become Hot With Extended Use. DO NOT touch.

HOW TO USE THE TAMPER

WARNING
Rotating Blades Can Cause Severe Injury.

DO NOT put hands, spatulas, etc. in the container while the machine is running or while the container is still on the base.
Lids and tampers are not interchangeable between different container styles, types, and sizes. Use the tamper that was supplied with your machine.

IMPORTANT

The splash disk (near the top of the tamper) and lid prevent the tamper from hitting the blades when the lid is secured properly in the locked position.
The container should not be more than two-thirds full when the tamper is used during blending.
To avoid overheating during blending, DO NOT use the tamper for more than 30 consecutive seconds.
If the food does not circulate, the machine may have trapped an air bubble. Carefully remove the lid plug while making sure the lid stays firmly in place. Release the air bubble by inserting the tamper through the lid plug opening.
Holding the tamper straight down may not help the ingredients circulate. If necessary, point the tamper toward the sides or corners of the container. DO NOT try to force the tamper deeper into the container.

CONTROL PANEL

On/Off Switch: The On/Off (or Power) Switch is on the right-hand side of the machine base. The On/Off Switch controls the power to the machine. BEFORE moving the On/Off Switch to the On (I) position, make sure the Start/Stop Switch is in the Stop position and the Variable Speed Dial is to the far left, pointed at number 1. Move the On/Off Switch to the Off position whenever the machine will be left unattended.
On/Off Indication: When the Pulse and Start symbols are lit, they indicate that the machine is plugged in, the On/Off Switch is powered On, and power is flowing.
Start/Stop Switch: Before starting, always make sure that the Variable Speed Dial is to the far left, pointed at number 1. Lifting the Start/Stop Switch to the Start position will start the machine and initiate the blending process.
Variable Speed Dial: The Variable Speed Dial selects blade rotation speeds from 1 to 10 (low to high). Always begin the blending process with the Variable Speed Dial set to 1. Make sure that the On/Off Switch is in the On (I) position. Move the Start/Stop Switch to the Start position. Rotate the Variable Speed Dial to the desired speed setting. To stop the machine, rotate the Variable Speed Dial back to 1 and move the Start/Stop Switch back to Stop position. If the Variable Speed function is not working and the blades only rotate at the lowest speed (Variable Speed 1), the blender must be reset.
Pulse Switch: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on Variable Speed Dial for as long as the Pulse Switch is held down.

HINTS FOR SETTING SPEEDS

To minimize splatter, always begin the blending process with the Variable Speed Dial set to 1 and slowly increase the speed to the desired setting.

Use the highest setting called out in the recipe for as much of the processing time as possible to make whole-food juices, soups, shakes, frozen mixtures, purées, nut butters, and for grinding grains. Processing times will generally be less than one minute (most take less than 30 seconds). Higher speed provides the best quality of refinement, breaking down ice, frozen fruit, whole fruits or vegetables, and grains to a smooth, lump-free consistency.

Tip: Blending too long at too low of a speed setting will overheat the machine and cause the Automatic Overload Protection to turn off the machine. Blending on higher speed maximizes the motor’s cooling fan to avoid overheating.

If the food does not circulate, the machine may be overloaded or may have trapped an air bubble. Carefully remove the lid plug while making sure that the lid stays firmly in place. Release the air bubble by inserting the tamper through the lid plug opening. If circulation problems continue, reduce the machine speed. A lower speed may allow food to circulate when a higher speed does not. Once the food is circulating freely, increase the speed back to the higher setting and continue processing.

CAUTION: Never Start on Speeds Above 1 with Hot Liquids to Avoid Possible Burns. Use Caution; escaping steam or splashes may scald. Lock the lid. This prevent expansion from affecting the position of the lid when the machine is turned on. Start on Variable 1, slowly increase to 10.

OPERATING INSTRUCTIONS

Wet Blade Container

Designed for processing liquids including juice, frozen mixtures, sauces, soups, purées, batters, and for wet chopping.

Make sure that the Variable Speed Dial is set to 1.
Load the container before placing it on the motor base. Place liquids and soft foods in the container first, solid items and ice last. Although not necessary for blending, you may want to cut or break food into smaller pieces for more precise measuring of ingredients.
Securely fasten the 2-Part lid. Always use the complete 2-Part lid when blending (unless the tamper is inserted through the lid plug opening). Especially when blending hot ingredients, make sure that the lid is securely latched.
With the motor off, set the wet blade container on the motor base by aligning it over the centering pad. Never attempt to put a container on an operating motor base or to operate a motor base without a container properly in place.
Start with the On/Off Switch in the On position. Always start your machine on variable speed 1. Activate the machine by lifting up the Start/Stop Switch to the Start ( ) position and slowly increase the variable speed to the desired speed. Your container will shift and get into an aligned position.
If the mixture stops circulating, you may have trapped an air bubble. If inserting the tamper through the lid plug while blending does not release it, reduce the speed on the dial to variable speed 5. Use the tamper to stir until it “burps.” If these methods do not work, stop the motor, remove the container from the motor base, and use a rubber spatula to press the air bubble away from the blades. Return the container to the motor base, replace the lid, and continue blending.
Take proper care when handling and processing hot ingredients and making hot soups and sauces.
CAUTION: Never Start on Speeds Above 1 with Hot Liquids to Avoid Possible Burns.
- Use Caution; escaping steam or splashes may scald. Lock the lid. This will prevent expansion from affecting the position of the lid when the machine is turned on.
- Start on Variable 1, slowly increase to 10.
Due to the machine’s speed, processing times are much quicker than standard appliances. Until you are accustomed to the machine, count your time carefully to avoid over-processing.
After turning the machine off, wait until the blades completely stop before removing the lid or container from the motor base.

Dry Blade Container

If purchased, your dry blade container should only be used for hard, dry materials such as grain, and for kneading dough.

Make sure that the Variable Speed Dial is set to 1.
Securely fasten the 2-Part. Always use the complete 2-Part lid when blending (unless the tamper is inserted through the lid plug opening).
With the motor off, set the dry blade container on the motor base by aligning it over the centering pad. Never attempt to put a container on an operating motor base or to operate a motor base without a container properly in place.
Start with the On/Off Switch in the On position. Always start your machine on variable speed 1. Activate the machine by lifting up the Start/Stop Switch to the Start ( ) position and slowly increase the variable speed to the desired speed.
After turning off the machine, wait until the blades completely stop before removing the lid or container from the motor base.
Due to the machine’s speed and the sometimes-short processing times, count your time carefully to avoid over-processing.
Grinding dry material for more than two minutes could damage your machine. Regular use may result in cosmetic marring of the container and cause the blades to become dull over time.
Grinding some herbs may release volatile oils, causing the container to discolor permanently. Others have strong odors that may linger in the container, affecting the flavor of other foods. The grinding of some herbs and spices may also cause the blade to dull over time, or the container to crack.

Setup Guide

To get started with your Vitamix Container Blender 7500, follow these simple steps:

Assemble the blender by securely attaching the container to the motor base.
Plug in the blender and select your desired speed using the variable control dial.
Add your ingredients to the container and secure the lid.
Blend the ingredients for the recommended time, using the pulse feature as needed for added texture.
Unplug the blender and carefully remove the container. Disassemble the blender for easy cleaning.

CARE AND CLEANING

Container

To prepare your new machine for initial use, follow the steps under Normal Cleaning below. This will clean the unit, and break-in the motor.

Normal Cleaning

Fill the container half full with warm water and add a couple drops of liquid dish washing detergent to the container.
Snap or push the complete 2-Part lid into locked position.
Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High.
Run the machine on High speed for 30 to 60 seconds.
Turn off the machine, and rinse and drain the container.

To Sanitize

Follow Normal Cleaning instructions above.
Fill the container half full with water and 1 1/2 teaspoons of liquid bleach.
Snap or push the complete 2-Part lid into locked position.
Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High.
Run the machine on High speed for 30 to 60 seconds.
Turn off the machine, and allow mixture to stand in the container for an additional 1 1/2 minutes.
Pour bleach mixture out. Allow container to air dry.
Do not rinse after sanitizing.

Lid, Lid Plug and Tamper

Separate the lid and lid plug. Wash the parts in warm soapy water. Rinse clean under running water, and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the container, lid, lid plug or tamper in the dishwasher.

Motor Base

Unplug the power cord.
WARNING
- Electrical Shock Hazard.
- Disconnect power before cleaning machine.
- Failure to follow instructions can cause death or electrical shock.
Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of liquid detergent and warm water. Do not place the motor base in water.
The centering pad can be removed for more thorough cleaning.
Thoroughly clean the switches so they work freely. They may become sticky from use. Use a moistened cotton swab to clean the grooves around the water-shielded switches. Immediately dry any excess water.
Polish with a soft cloth.

IMPORTANT SAFEGUARDS

WARNING: To avoid the risk of serious injury when using your Vitamix® blender, basic safety precautions should be followed, including the following.

READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATING BLENDER.

Read all instructions.
Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or incapacitated persons.
To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
Avoid contacting moving parts.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
Alteration or modification of any part of the blender base or container, including the use of any part or parts that are not genuine authorized Vitamix parts, may cause fire, electric shock, or injury.
The use of attachments not expressly authorized or sold by Vitamix for use with this blender, including canning jars, may cause fire, electric shock, or injury.
Do not use outdoors.
Do not let cord hang over the edge of table or counter.
Do not let cord contact hot surface, including the stove.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A rubber scraper or spatula may be used, but only when the Vitamix blender is not running.
The tamper provided must be used only when the main part of the lid is in place.
Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care to avoid injury. To reduce the risk of injury, never place a blade assembly on the motor base unless assembled to the Vitamix container.
Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will damage the blades and other components when starting the machine and may cause injury.
Never attempt to operate with damaged blades.
Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when adding ingredients and when using the tamper.
When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding and burns. Do not fill container to the maximum capacity. Always begin processing on the lowest speed setting, variable speed 1. Keep hands and other exposed skin away from the lid opening to prevent possible burns.
When making nut butters or oil-based foods, do not process for more than one minute after the mixture starts to circulate in the container. Processing for longer periods can cause dangerous overheating.

SAVE THESE INSTRUCTIONS

WARNING: To Avoid Injury.

Read and understand instruction manual before using this machine.

IMPORTANT INSTRUCTIONS FOR SAFE USE

This product is intended for HOUSEHOLD USE ONLY and is not intended to be used for commercial purposes. Do not leave your Vitamix blender unattended when operating. Any repair, servicing, or the replacement of parts must be performed by Vitamix or an authorized service representative.

WARNING

Electrical Shock Hazard
Use grounded outlet only. DO NOT remove ground. DO NOT use an adapter. DO NOT use an extension cord. Failure to follow instructions can cause death or electrical shock.

NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

Vitamix Container Blender 7500 Troubleshooting

Automatic Overload Protection
Your Vitamix machine is equipped with a special feature: Automatic Overload Protection. This built-in feature is designed to protect the motor and prevent your machine from overheating. That means peace of mind for you as a Vitamix owner. When engaged, this Automatic Overload Protection will cause the motor to shut off and possibly emit a light odor.

If your Automatic Overload Protection should ever be activated, refer to page 8 in this manual to easily reset your machine.

Tips to prevent “overloading” your Vitamix machine

Process only Vitamix recipes when learning to use the machine
Do not process recipes at lower speeds than recommended
Do not process recipes at higher speeds than recommended
Do not process recipes longer than recommended
Use your tamper to process thicker mixtures and keep ingredients moving around and through the blades

Retainer Nut Loosening
In the event that the retainer nut at the bottom of your container loosens and no longer securely holds the blade assembly in place, DO NOT CONTINUE TO USE THE CONTAINER. Call Vitamix Customer Service at 1-800-848-2649 or 1-440-235-4840, or your local dealer immediately for instructions.

Variable Speed Reset
If the Variable Speed Function is not working and the blades only rotate at the lowest speed (Variable Speed 1), the blender must be reset. To reset the machine and reactivate the Variable Speed Function:

Switch the Start/Stop Switch to Stop .
Turn the Variable Speed Dial back to 1. This will reset the Variable Speed Function. When you move the Start/Stop switch to the Start position, you will have full use of all variable speeds.

WARRANTY

7-Year Full Machine Warranty

PRODUCT REGISTRATION
Vita-Mix Corporation (“Vitamix”) strongly encourages you to register your purchase by completing and returning the product registration card that came with this Machine. You can register online at http://www.vitamix.com/warranty

WHAT IS COVERED
Vitamix warrants to the owner that if this Machine (a “Machine” consists of a motor blender base and any containers purchased together) fails within 7 years from the date of purchase due to a defect in material or workmanship or as a result of normal wear and tear from ordinary household use, Vitamix will, within 30 days of receipt of the returned product, repair the failed Machine or component part of the Machine free of charge. If, in Vitamix’s sole discretion, the failed Machine or component part of the Machine cannot be repaired, Vitamix will elect to either (A) replace the Machine free of charge or (B) refund the full purchase price to the owner, unless Vitamix receives prior written notice of the owner’s preference.

Pros & Cons

Pros

Powerful and versatile motor
Durable stainless-steel blades
Variable speed control and pulse feature
Space-saving design and dishwasher-safe components

Cons

Higher price point compared to other blenders
Heavier and bulkier than some competitors
May produce louder noise levels during operation

Customer Reviews

Customers consistently rave about the Vitamix Container Blender 7500 exceptional blending performance and durable design. Many note that, while the higher price point may be a deterrent for some, the blender's powerful motor, versatile speed control, and user-friendly features make it well worth the investment. Common complaints include the blender's heavier weight and bulkier design compared to competitors, as well as its higher noise levels during operation.

Search Manuals in: blender-7500

Read More