Introduction

The Champion Power Equipment Pressure Washer 100382M is a powerful and efficient cleaning tool designed for various outdoor tasks. With a robust motor and durable construction, it delivers high-pressure water for effective cleaning of driveways, decks, and vehicles. Its user-friendly design includes adjustable pressure settings and a variety of nozzles to tackle different surfaces. This pressure washer is priced at approximately $300, making it a valuable addition to any home maintenance toolkit.

Parts Included

Gun Assembly
- Spray Wand (A)......................................................................1
- Trigger Gun (B).......................................................................1
- Quick Connect Nozzles (C)......................................................3
Hoses
- 25 ft. (7.6 m) High Pressure Hose (D)......................................1
- 35.4 in. (0.9 m) Detergent Hose (E).........................................1
Other
- Oil Funnel (F)..........................................................................1

SPECIFICATIONS

Pressure Washer Speciﬁcations

Model........................................................................ 100382M
Max Pressure.............................................................2600 PSI
Max Volume................................................................2.2 GPM
Max Water Temperature.......................................140°F (60°C)
Fuel Capacity.....................................................0.9 gal. (3.4 L)
Net Weight.....................................................63.3 lb. (28.7 kg)
Height...........................................................38.3 in. (97.2 cm)
Width............................................................18.4 in. (46.7 cm)
Length.............................................................26.8 in. (68 cm)

Engine Specifications

Model................................................................ YF168F-2-000
Displacement.................................................................196 cc
Type....................................................................4-Stroke OHV
Start Type.....................................................................Manual

Oil Specifications
DO NOT OVERFILL.

Type.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *See chart below
Capacity.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 qt. (0.6 L)

NOTICE
Weather will affect engine oil and engine performance. Change the type of engine oil used based on weather conditions to suit the engine needs.

Fuel Specifications
Use unleaded gasoline intended for motor vehicle use with a minimum octane rating of 87 or higher. Never use fuel containing more than 10% ethanol. DO NOT USE E15 or E85.

DO NOT OVERFILL.

Gasoline Capacity.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 gal. (3.4 L)

Spark Plug Specifications

OEM Type.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NHSP F6RTC
Replacement Type.. . . . . . . . . . . . . . . . . . . NGK BPR6ES or equivalent
Gap.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7-0.8 mm (0.028-0.031 in.)

Valve Specifications

Intake Clearance.. . . . . . . . . . . . . . 0.13-0.17 mm (0.005-0.007 in.)
Exhaust Clearance.. . . . . . . . . . . . 0.18-0.22 mm (0.007-0.009 in.)

NOTICE
A technical bulletin regarding valve adjustment procedures is available at www.championpowerequipment.com.

Important Message About Temperature
Your Champion Power Equipment product is designed and rated for continuous operation at ambient temperatures up to 40°C (104°F). When your product is needed it may be operated at temperatures ranging from 5°F (-15°C) to 122°F (50°C) for short periods of time. If exposed to temperatures outside this range during storage, it should be brought back within this range before operation. In any event, the product must always be operated outdoors, in a well-ventilated area and away from doors, windows and vents.

CONTROLS AND FEATURES

Read this operator’s manual before operating your pressure washer. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference.

Nozzles
High Pressure Hose
Muffler
Air Filter – Protects the engine by filtering dust and debris from the intake air.
Throttle Lever – Used to control the engine speed.
Choke Lever – Used to start the engine when cold.
12 in. (30.5 cm) Never Flat Tires
Recoil Starter – Used to manually start the engine
Engine Switch
Fuel Valve Knob – Used to turn fuel supply on and off to engine
Fuel Tank – 0.9 gal. (3.4 L)
Trigger Gun Assembly – Gun and spray wand
Trigger Gun Holder – Used to hold gun when assembled and not in use
High Pressure Hose Hanger – Used to hold high pressure hose when not in use.
High Pressure Hose Outlet
Garden Hose Inlet
Detergent Hose Connection Barb

Champion Power Equipment Pressure Washer 100382M ASSEMBLY

Remove the Pressure Washer from the Shipping Carton

Set the shipping carton on a solid, flat surface.
Remove everything from the carton except the pressure washer.
Carefully cut each corner of the box from top to bottom.

Install Handle to Bottom Frame

Line up the handle with the bottom frame.
Make sure the handle holes are lined up with the bottom frame spring button (A). Front face of shroud (decal side) should face the engine
Slide the handle downward on the bottom frame, until the spring buttons have popped through the holes on the handle frame. A “click” may sound. (B)
Gently pull up on the handle to make sure that two frames have made a solid connection and that the handle can not be pulled off without pressing on the spring buttons to release it.

Add Engine Oil

CAUTION

DO NOT attempt to crank or start the engine before it has been properly filled with the recommended type and amount of oil. Damage to the pressure washer as a result of failure to follow these instructions will void your warranty.

NOTICE

The recommended oil type is 10W-30 automotive oil.

Place the pressure washer on a flat level surface.
Remove oil fill cap/dipstick to add oil.
Add up to 0.6 qt. (0.6 L) (not included) of oil and replace oil fill cap/dipstick. DO NOT OVERFILL.
Check engine oil level daily and add as needed.

NOTICE

Once oil has been added, a visual check should show oil about 1-2 threads from running out of the fill hole.
If using the dipstick to check oil level, DO NOT screw in the dipstick while checking.

add_engine_oil_of_champion_power_equipment_pressure_washer_100382m.png

add_engine_oil_of_the_champion_power_equipment_pressure_washer_100382m.png

NOTICE

We consider the first 5 hours of run time to be the break-in period for the engine. During the break in period we recommend using standard automotive non-synthetic blended oils. After the break in period synthetic lubricant can be used but is not required. Adjusting throttle setting will increase/decrease engine speed helping to seat piston rings. Avoid bogging or lugging the engine down and avoid prolonged running at constant RPM. After the 5 hour break-in period, change the oil. Using synthetic lubricants does not increase the recommended oil change interval.

CAUTION

The engine is equipped with a low oil shut-off and will stop when the oil level in the crankcase falls below the threshold level.

NOTICE

Check oil often during the break-in period. Refer to the Maintenance section for recommended service intervals.

NOTICE

The engine rotor has a sealed, pre-lubricated ball bearing that requires no additional lubrication for the life of the bearing.

NOTICE

Weather will affect engine oil and engine performance. Change the type of engine oil used based on weather conditions to suit the engine needs.

Add Fuel

Use clean, fresh, regular unleaded fuel with a minimum octane rating of 87 and an ethanol content of less than 10% by volume.
DO NOT mix oil with fuel.
Clean the area around the fuel cap.
Remove the fuel cap.
Slowly add fuel to the tank. DO NOT OVERFILL. Fuel can expand after filling. A minimum of ¼ in. (6.4 mm) of space left in the tank is required for fuel expansion, more than ¼ in. (6.4 mm) is recommended. Fuel can be forced out of the tank as a result of expansion if it is overfilled, and can affect the stable running condition of the product. When filling the tank, it is recommended to leave enough space for the fuel to expand.
Screw on the fuel cap and wipe away any spilled fuel.

WARNING

Pouring fuel too fast through the fuel screen may result in blow back of fuel at the operator while filling.

CAUTION

Use regular unleaded gasoline with a minimum octane rating of 87.

Do not mix oil and gasoline.
Fill tank to approximately ¼ in. (6.4 mm) below the top of the tank to allow for fuel expansion.
DO NOT pump gas directly into the pressure washer at the gas station. Use an approved container to transfer the fuel to the pressure washer.
DO NOT fill fuel tank indoors.
DO NOT fill fuel tank when the engine is running or hot.
DO NOT overfill the fuel tank.
DO NOT light cigarettes or smoke when filling the fuel tank.

NOTICE

Our engines work well with 10% or less ethanol blend fuels. When using blended fuels there are some issues worth noting:

Ethanol-gasoline blends can absorb more water than gasoline alone.
These blends can eventually separate, leaving water or a watery goo in the tank, fuel valve and carburetor.
With gravity-fed fuel supplies, this compromised fuel can be drawn into the carburetor and cause damage to the engine and/or potential hazards.
There are only a few suppliers of fuel stabilizer that are formulated to work with ethanol blend fuels.
Any damages or hazards caused by using improper fuel, improperly stored fuel, and/or improperly formulated stabilizers, are not covered by manufacturer's warranty.

It is advisable to always shut off the fuel supply, run the engine to fuel starvation and drain the tank when the equipment is not in use for more than 30 days.

Attach the Trigger Gun Assembly

Attach the spray wand (A) to the trigger gun (B).
Rotate (clockwise) the M22 coupler on the trigger gun until the spray wand is secure. Tighten connection. DO NOT OVER-TIGHTEN.
Connect the end of the high pressure hose (C) to the gun inlet. Tighten connection clockwise. DO NOT OVER-TIGHTEN.

NOTICE
Be careful to avoid cross-threading, which can cause the trigger gun to leak during use.

notice_champion_power_equipment_pressure_washer_100382m.png

Connect the High Pressure Hose

Completely uncoil and straighten the high pressure hose to prevent kinks.
Align the collar on the hose to the threaded outlet on the pump.
Insert the high pressure hose collar onto the threaded outlet.
Turn the collar clockwise to tighten the hose securely to the pump.
NOTICE
Be careful to avoid cross-threading, which can cause the hose to leak during use.
Gently pull on the hose to be certain it is properly secured.

Connect the Garden Hose
The water supply must come from a pressurized water spicket. NEVER use hot water or water from pools, lakes, etc.

Before connecting the garden hose to the pressure washer:

Run water through the hose for 30 seconds to clean any debris from the hose.
Inspect the screen and gasket in the water intake.
If the screen and gasket is damaged, do not use the machine until the screen has been replaced.
If the screen is dirty, clean it before connecting the garden hose to the machine.

To connect the garden hose to the machine:

Completely uncoil the garden hose or remove completely from reel to prevent kinks.
NOTICE: There must be a minimum of 10 ft. (3 m) of unrestricted hose between the pressure washer intake and the hose faucet or shut off valve (such as a “Y” shut off connector).
With the hose faucet turned completely off, attach the end of the garden hose to the water inlet. Tighten by hand.

NOTICE

Do not run the pressure washer without water supply connected and turned on, as this may damage the high pressure seals and decrease pump life. Completely unwind the hose from its reel or coil and make sure the hose is not being restricted by tires, rocks, or any other objects that may lessen or prevent water flow to the pressure washer.

To connect the detergent hose to the pump

Completely uncoil the detergent hose.
Connect one end to detergent hose connection barb (A) on the pump.

Description

The Champion Power Equipment Pressure Washer 100382M features a powerful 196cc OHV engine that delivers up to 3200 PSI and 2.2 GPM, making it capable of handling a wide range of cleaning tasks. The axial cam pump is designed for durability and long-lasting performance. The pressure washer comes with five quick-connect nozzle tips, allowing you to adjust the spray pattern according to the job at hand. The 25-foot high-pressure hose provides ample reach, and the onboard storage keeps everything organized.

The unit is built with a sturdy frame and durable components, ensuring it can withstand regular use. The ergonomic design includes a comfortable handle and large wheels for easy mobility. This pressure washer is also EPA-certified and CARB-compliant, making it an environmentally responsible choice.

OPERATION

Pressure Washer Location
This pressure washer must have at least 5 ft. (1.5 m) of clearance from combustible material. Leave at least 3 ft. (91.4 cm) of clearance on all sides of the pressure washer to allow for adequate cooling, maintenance and servicing. Place the pressure washer in a well ventilated area. DO NOT place the pressure washer near vents or intakes where exhaust fumes could be drawn into occupied or confined spaces. Carefully consider wind and air currents when positioning pressure washer.

Before Starting the Engine

Turn the water supply ON.
Pull the trigger on the trigger gun to purge all air from the pump and hose. This may take several minutes.
Do not start the engine until a steady stream of water is flowing from the nozzle

CAUTION

Never operate your pressure washer without water.

Starting the Engine

Make certain the pressure washer is on a flat, level surface.
Turn engine switch to “ON” position (A).
Rotate the fuel valve to the “ON” position (B).
Move the throttle lever (C) to the “FAST” position.
Move the choke lever (D) to the “CHOKE” position.
Pull the starter cord slowly until resistance is felt and then pull rapidly. SEE NOTE.
As engine warms up, move the choke lever (D) to “RUN” and adjust the throttle (C) as needed.

NOTICE

Keep choke lever in “CHOKE” position for 2 pulls of the recoil starter. After second pull, move choke lever to the
“RUN” position for up to the next 3 pulls of the recoil starter. To much choke leads to spark plug fouling/engine flooding due to the lack of incoming air. This will cause the engine not to start.

NOTICE

If the engine does not start after 2 pulls, relieve pump pressure by pulling the trigger on the trigger gun.

NOTICE

If the engine starts but does not run make certain that the pressure washer is on a flat, level surface. The engine is equipped with a low oil sensor that will prevent the engine from running when the oil level falls below a critical threshold.

Distance from Cleaning Surface
The distance between the spray nozzle and the cleaning surface is another factor that affects the impact force of the water. The impact force of the water increases as the nozzle is moved closer to the surface. You can vary the impact force by controlling

The nozzle’s fan pattern.
The nozzle’s angle to the cleaning surface.
The nozzle’s distance from the cleaning surface.

Never use a narrow high impact stream on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle. Doing so may break the glass.

Before triggering the gun, select a nozzle with a wide fan pattern.
Place the nozzle approximately 4-5 ft. (1.2 m - 1.5 m) away from the cleaning surface. Then hold the nozzle at a 45 degree angle to the cleaning surface. Trigger the gun.
Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning efficiency is achieved without damaging the surface.

Use the following table to determine which nozzle to use.

High Pressure Wash

CAUTION

Always engage the trigger safety latch when the unit is not in use.

The trigger safety latch prevents the gun from being triggered accidentally. Push the latch fully down to engage it.

WARNING: Injection hazard.

Fully unwrap and straighten high pressure hose prior to and during each use and do not allow it to become kinked. The high pressure hose features an outer covering that provides strength to the hose. If the outer covering becomes damaged, stop using the hose and replace it immediately. A kinked or damaged hose can develop a high pressure leak and result in a possible injection or other serious personal injury.

NOTICE

If the starter grip and rope becomes difficult to pull, squeeze the trigger to relieve water pressure before attempting to start the engine again.

For high pressure cleaning, refer to the Nozzle Selection Guide for more information about which quick connect nozzle to choose.

CAUTION

The narrow high impact spray can damage some surfaces.

A wide fan pattern distributes the impact of the water over a larger area resulting in excellent cleaning action with reduced risk of surface damage. Clean large surface areas quickly using a wide fan pattern.

Low Pressure Wash

Detergent Use
The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Many detergents are customized for pressure washer use on specific cleaning tasks. Pressure washer detergents are as thick as water. Using thicker detergents – like dish soap – will clog the chemical injection system.

NOTICE

Use only detergents designed for pressure washers.

Do not use household detergents, acids, alkalines, bleaches, solvents, flammable material, or industrial grade solutions, which can damage the pump or cause property damage. Many detergents may require mixing prior to use. Prepare cleaning solution as instructed on the solution bottle. Always test in an inconspicuous area before beginning.

You can effectively clean surfaces by combining the chemical action of detergents with high pressure rinses. On vertical surfaces, apply the detergent starting at the bottom and work your way upward. This method prevents the detergent from sliding down and causing streaks. Begin high pressure rinsing at the bottom and work your way upward. On particularly tough stains, use a brush in combination with detergents and high pressure rinsing.

Insert the detergent suction hose (end with filter) into the detergent bottle or container.
Install the quick connect detergent nozzle (black) in the spray wand. Detergent will only be drawn through the pump when the black detergent nozzle is attached to the end of the wand.
Be sure water supply is on. Start the engine. Pull the trigger gun to spray the detergent solution.

WARNING

NEVER use bleach. It will damage the pump and void the warranty.

NOTICE

The trigger gun will only draw detergent when the black quick connect nozzle is installed in the wand.

NOTICE

When spraying detergent, the detergent will be diluted 1:12. Approximately 21oz. (0.6 L) of detergent will be consumed for every minute sprayed.

System Flush

After using detergents, flush the suction system by placing the detergent suction tube into a bucket of clean water.

WARNING

NEVER turn the water supply off before turning the engine off.

Depressurize System

To depressurize, turn engine off, turn water supply off and squeeze gun trigger for at least 15 seconds after engine is turned off.

WARNING
NEVER disconnect the high pressure discharge hose from the machine while the system is pressurized.

To reduce the risk of bodily injury or property damage, always follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the system.

Engage the trigger gun lock out.
Turn the unit off.
Shut off the water supply.
Disengage the trigger safety latch and trigger the gun to relieve pressure.
Re-engage the trigger safety latch.
Before overnight storage, long term storage, or transporting unit, disconnect the water supply and turn off the fuel supply valve.

Operating Tips

CAUTION
Never operate your pressure washer without water.

CAUTION
Never connect your pressure washer to a hot water supply. Connecting your pressure washer to a hot water source will significantly reduce the life of the pump and will void the warranty.

CAUTION

Running the unit for more than one minute without spraying water causes heat to build up in the pump. In the event that the pump gets too hot, a thermal relief valve will open to release the hot water. Running the unit without spraying water can damage pump components and will void the warranty.

Stopping the Engine

Turn the fuel valve to the “OFF” position.
Let the engine run until fuel starvation has stopped the engine. This usually takes a few minutes.
Press the engine switch to the “OFF” position.
Depressurize system.
Turn off water supply and unplug all hoses. Never start or stop the pressure washer unless the water supply is turned on.

Important: Always ensure that the fuel valve and the engine switch are in the “OFF” position when the engine is not in use.

NOTICE
If the engine will not be used for a period of two (2) weeks or longer, please see the Storage section for proper engine and fuel storage.

Operation at High Altitude

The density of air at high altitude is lower than at sea level. Engine power is reduced as the air mass and air-fuel ratio decrease. Engine power and output will be reduced approximately 3½% for every 1000 ft. (305 m) of elevation above sea level. This is a natural trend and cannot be changed by adjusting the engine. At high altitudes increased exhaust emissions can also result due to the increased enrichment of the air fuel ratio.

Other high altitude issues can include hard starting, increased fuel consumption and spark plug fouling. To alleviate high altitude issues other than the natural power loss, Champion Power Equipment can provide a high altitude carburetor main jet. The alternative main jet and installation instructions can be obtained by contacting Customer Support. Installation instructions are also available in the Technical Bulletin area of the Champion Power Equipment internet site.

The part number and recommended minimum altitude for the application of the high altitude carburetor main jet is listed in the table below. In order to select the correct high altitude main jet it is necessary to identify the carburetor model. For this purpose, a code is stamped on the side of the carburetor. eeks or longer, please see the Storage section for proper engine and fuel storage.

Select the correct main jet part number corresponding to the carburetor code found on your particular carburetor.

Carburetor Code	Main Jet	Part Number	Altitude
P19-1-Z	Standard	26.131017.00.Z	3500 ft. (1067 m)
P19-1-Z	Altitude	26.131017.00.01.Z
P19-1-Y	Standard	26.131017.00.Y
P19-1-Y	Altitude	26.131017.00.01.Y
P19-1-H	Standard	26.131017.00.H
P19-1-H	Altitude	26.131017.00.01.H

WARNING

Operation using the alternative main jet at elevations lower than the recommended minimum altitude can damage the engine. For operation at lower elevations, the standard main jet must be used. Operating the engine with the wrong engine configuration at a given altitude may increase its emissions and decrease fuel efficiency and performance.

Setup Guide

To set up the Champion Power Equipment Pressure Washer 100382M,

Start by assembling the unit according to the instructions provided.
Connect the high-pressure hose to the pump and the spray gun. Ensure all connections are secure to avoid leaks.
Fill the gas tank with the recommended type of fuel, and add the necessary oil.
Connect any additional accessories such as the detergent tank if using.
Before first use, prime the pump by pulling the recoil start several times until you see fuel in the clear tube.
Start the engine and let it run for a few minutes to warm up. Adjust the nozzle tip as needed for your cleaning task.

MAINTENANCE

Make certain that the pressure washer is kept clean and stored properly. Only operate the unit on a flat, level surface in a clean, dry operating environment. DO NOT expose the unit to extreme conditions, excessive dust, dirt, moisture or corrosive vapors.

WARNING

Never operate a damaged or defective pressure washer.

WARNING

Improper maintenance will void your warranty.

NOTICE

Maintenance, replacement, or repair of emission control devices and systems may be performed by any non-road engine repair establishment or individual.

Cleaning the Pressure Washer

CAUTION

DO NOT spray the pressure washer with water.

Water can contaminate the fuel system and can enter the engine through the cooling slots and damage the engine.

Use a damp cloth to clean exterior surfaces of the pressure washer.
Use a soft bristle brush to remove dirt and oil.
Use an air compressor (25 PSI) to clear dirt and debris from the pressure washer.
Inspect all air vents and cooling slots to ensure that they are clean and unobstructed.

Cleaning Spray Nozzle
Detach the quick connect nozzle from the wand. Use a small wire rod (paper clip) to loosen up any particles in the quick connect nozzle and flush with water.

cleaning_the_pressure_washer_champion_power_equipment_pressure_washer_100382m.png

To prevent accidental starting, remove and ground spark plug wire before performing any service.

Changing the Engine Oil
Change oil when the engine is warm. Refer to the oil specification to select the proper grade of oil for your operating environment.

Remove the oil drain plug with a 12 mm socket and extension (not included).
Allow the oil to drain completely.
Replace the drain plug.
Remove oil fill cap/dipstick to add oil.
Add up to 0.6 qt. (0.6 L) of oil and replace oil fill cap/dipstick. DO NOT OVERFILL.
Dispose of used oil at an approved waste management facility.

NOTICE
Once oil has been added, a visual check should show oil about 1-2 threads from running out of the fill hole. If using the dipstick to check oil level, DO NOT screw in the dipstick while checking.

Cleaning and Adjusting the Spark Plug(s)

Remove the spark plug cable from the spark plug.
Use a spark plug socket tool (not included), or a 21 mm (13/16 in.) (not included) socket to remove the plug.
Inspect the electrode on the plug It must be clean and not worn to produce the spark required for ignition
Make certain the spark plug gap is 0.7-0.8 mm (0.028-0.031 in.).
Refer to the spark plug types in Specifications when replacing the plug.
Carefully thread the plug into the engine
Use the spark plug socket tool (not included), or a 21 mm (13/16 in.) (not included) socket to install the plug.
Attach the spark plug wire to the plug.

Cleaning the Air Filter

Using your fingers, unscrew the thumb screws of the top holes of the air filter cover.
Remove the plastic outer casing.
Remove the foam element.
Wash in liquid detergent and water. Squeeze thoroughly dry in a clean cloth.
Saturate in clean engine oil.
Squeeze in a clean, absorbent cloth to remove all excess oil.
Place the filter in the assembly.
Reattach the air filter cover and using your fingers, insert the thumb screws into the top and bottom holes of the air filter cover. Screw until tight. Be sure not to over tighten.

Cleaning the Spark Arrester

Allow the engine to cool completely before servicing the spark arrester.
Remove the four (4) screws holding the cover plate which retains the end of the spark arrester to the muffler.
Remove the spark arrester screen.
Carefully remove the carbon deposits from the spark arrester screen with a wire brush.
Replace the spark arrester if it is damaged.
Position the spark arrester in the muffler and attach with the four (4) screws.

CAUTION

Failure to clean the spark arrester will result in degraded engine performance.

NOTICE

Federal and local laws and administrative requirements indicate when and where spark arresters are required. When ordered, spark arresters are required for operation of this product in National Forest lands. In California, this product must not be used on any forest-covered land, brush-covered land, or grass-covered land unless the engine is equipped with a spark arrester.

Adjusting the Governor

WARNING

Tampering with the factory set governor will void your warranty.
The air-fuel mixture is not adjustable. Tampering with the governor can damage your pressure washer and will void your warranty.

Maintenance Schedule

Follow the service intervals indicated in the schedule below. Service your pressure washer more frequently when operating in adverse conditions. Contact our help line at 1-877-338-0999 to locate the nearest Champion Power Equipment certified service dealer for your maintenance needs.

EVERY 8 HOURS OR DAILY

Check oil level
Clean around air intake and muffler

FIRST 5 HOURS

Change oil

EVERY 50 HOURS OR EVERY SEASON

Clean air filter
Change oil if operating under heavy load or in hot environments

EVERY 100 HOURS OR EVERY SEASON

Change oil
Clean/adjust spark plug
Check/adjust valve clearance*
Clean spark arrester
Clean fuel tank and filter*

EVERY 250 HOURS

Clean combustion chamber*

EVERY 3 YEARS

Replace fuel line*

To be performed by knowledgeable, experienced owners or Champion Power Equipment certified dealers.

STORAGE

Pressure Washer Storage

Allow the pressure washer to cool completely before storage.
Turn off the fuel supply at the fuel valve.
Clean the pressure washer according to the instructions in the Maintenance section.
Store the unit in a clean, dry area out of direct sunlight.

Engine Stored for Less than 30 Days

Allow the engine to cool completely before storage.
Clean engine according to the Maintenance section.
To extend the fuel storage life add a properly formulated fuel stabilizer to the tank.
Ensure the fuel valve is in the “OFF” position.

Engine Stored for Over 30 Days

Add a properly formulated fuel stabilizer to the tank.
Run the engine for a few minutes so the treated fuel cycles through the fuel system and carburetor.
Turn the fuel valve to the “OFF” position.
Let the engine run until fuel starvation has stopped the engine. This usually takes a few minutes.
The engine needs to cool completely before cleaning and storage.
Clean the engine according to the Maintenance section.
Change the oil.
Remove the spark plug and pour about 1⁄2 oz. (14.9 mL) of oil into the cylinder. Crank the engine slowly to distribute the oil and lubricate the cylinder.
Reattach the spark plug.

Winter Storage
Protect your pressure washer parts from freezing.

Apply all storage instructions from previous sections.
Make sure pressure washer hose is free of all water before storing for winter.
In order to prevent the pump from freezing you will need to insert RV antifreeze.
You will need approximately 6 oz. (177.4 mL) of RV antifreeze, a funnel, and approximately 12 in. (30.5 cm) of garden hose or equivalent. See diagram below.
Pour the antifreeze into the funnel, then pull on the engine recoil starter to create suction in the pump housing. Pull the recoil several times until antifreeze comes out of the pump outlet.

WARNING

Never store the pressure washer inside or next to appliances where there is a source of heat or open flame, spark or pilot light because they can ignite gasoline vapors.
DO NOT store a pressure washer near fertilizer or any corrosive material.
Even with an empty gas tank, gasoline vapors could ignite.

DANGER
Engine exhaust contains odorless and colorless carbon monoxide gas.

To avoid accidental or unintended ignition of the product during periods of storage, the following precautions should be followed:

When storing the pressure washer for short or long periods of time make sure that the engine switch and the fuel valve are set in the "OFF" position.

NOTICE

Our engines work well with 10% or less ethanol blend fuels. When using blended fuels there are some issues worth noting:

Ethanol-gasoline blends can absorb more water than gasoline alone.
These blends can eventually separate, leaving water or a watery goo in the tank, fuel valve and carburetor.
With gravity-fed fuel supplies, this compromised fuel can be drawn into the carburetor and cause damage to the engine and/or potential hazards.
There are only a few suppliers of fuel stabilizer that are formulated to work with ethanol blend fuels.
Any damages or hazards caused by using improper fuel, improperly stored fuel, and/or improperly formulated stabilizers, are not covered by manufacturer's warranty.

It is advisable to always shut off the fuel supply, run the engine to fuel starvation and drain the tank when the equipment is not in use for more than 30 days.

Equipment Pressure Washer 100382M Troubleshooting

Problem	Cause	Solution
Pressure washer will not start.	No fuel.	Add fuel.
Pressure washer will not start.	Faulty spark plug.	Replace spark plug.
Pressure washer will not start; Pressure washer starts but runs roughly.	Low oil level.	Fill crankcase to the proper level. Place pressure washeron a flat, level surface.
	Choke in the wrong position.	Adjust choke.
	Spark plug wire loose.	Attach wire to spark plug.
Pressure washer gallops.	Engine governor defective.	Contact the help line.
Unit does not reach high pressure.	Water supply is restricted.	Check hoses for leaks, blockage, kinks.
	Garden hose is too small.	Replace with 5/8 in. garden hose or larger.
	Garden hose inlet filter is clogged.	Remove garden hose, clean filter and rinse out.
	Not enough inlet water.	Turn garden hose water on full force.
Spray pressure varies from high to low.	Poor inlet water supply.	Turn garden hosewater on fullforce. Check hose for leaks, blockage, or kinks.
	Garden hose inlet filter is clogged.	Remove garden hose, clean filter and rinse out.
	Spray nozzle is obstructed.	Remove particles with small wire rod (see maintenance section in manual).
	Pump is sucking air.	Check all hoses andfittings, make sure they are securely tightened down and fastened. Turn off engine and purge pump by squeezing trigger gun untila steady stream of waterflows.
Low pressure detergent wash is not functioning properly.	Detergent is too thick.	Dilute detergent
	Spray wand has highpressure quick connect nozzle installed.	Detergent only workswith low pressure quick connect nozzle (black).
	Detergent hose is not connected to the pump housing.	Check connection.
	Spray nozzle is obstructed.	Clean nozzle and remove debris.
	Filter on detergent hose is clogged.	Clean with warm water or replace.
	Chemical Injector valve (inside pump) partiallyblocked or stuck.	Quickly pull and release the gun trigger 4-5 time to clear the chemical injector valve.
	Detergent tube not connected to the brass fitting on the pump outlet.	Install detergent tube to detergent injector inlet near pump outlet.
Garden hose connection leaks.	Loose fittings.	Tighten.
Garden hose connection leaks.	Missing/worn-out rubber washer.	Replace rubber washer.
Spray wand leaks	Spray wand not properly attached.	Tighten all connections.
Can't pull recoil	Pump will build pressure with each pull.	Pull gun trigger after 2 pullsof recoil, to release pump pressure.

WARRANTY

CHAMPION POWER EQUIPMENT 2 YEAR LIMITED WARRANTY

Warranty Qualifications
To register your product for warranty and FREE lifetime call center technical support please visit: https://www.championpowerequipment.com/register To complete registration you will need to include a copy of the purchase receipt as proof of original purchase. Proof of purchase is required for warranty service. Please register within ten (10) days from date of purchase.

Repair/Replacement Warranty
CPE warrants to the original purchaser that the mechanical and electrical components will be free of defects in material and workmanship for a period of two years (parts and labor) from the original date of purchase and 90 days (parts and labor) for commercial and industrial use.

Pros & Cons

Pros:

Powerful 196cc OHV engine for robust cleaning performance
Durable axial cam pump for long-lasting use
Includes five quick-connect nozzle tips for versatility
25-foot high-pressure hose for extended reach
Ergonomic design with comfortable handle and large wheels
EPA-certified and CARB-compliant for environmental responsibility

Cons:

Relatively heavy at approximately 73 pounds
Noisy operation due to the gas engine

Customer Reviews

Customers praise the Champion Power Equipment Pressure Washer 100382M for its powerful performance and ease of use. Many have reported successful cleaning of tough surfaces like concrete and heavy-duty equipment. Some users have noted that while it is heavier than expected, the large wheels make it easy to move around.

Common complaints include the noise level of the gas engine and some users finding it more cumbersome to maintain compared to electric pressure washers.

Search Manuals in: champion-power-equipment

Read More