Alliance Cylinder Ironers 320 mm Diameter: Complete Product Manual

Introduction

The alliance Cylinder Ironers 320 mm Diameter represents the pinnacle of industrial laundry finishing technology, designed specifically for high-volume on-premises laundry applications. This robust cylinder heated ironer delivers exceptional output capabilities, ensuring linens, sheets, and tablecloths emerge perfectly smooth and dry with minimal processing time. The 320 mm roller diameter provides optimal surface contact—up to 300°—for superior ironing quality while maintaining energy efficiency through advanced heating systems compatible with steam, gas, or electric sources.

Key benefits include the Micro Control system for precise operation, built-in safety features like finger protection bars and emergency stop buttons, and flexible insertion widths of 1664 mm and 2080 mm to accommodate various laundry sizes. The target audience includes hotel laundry departments, hospital facilities, correctional institutions, and large-scale commercial laundries requiring reliable, high-throughput finishing equipment. Available globally through Alliance Laundry Systems partners, the alliance Cylinder Ironers 320 mm Diameter typically ranges between $15,000 and $28,000 depending on configuration and heating options, with standard availability through authorized distributors worldwide.

Specifications

The alliance Cylinder Ironers 320 mm Diameter (models FCU 1664/320 and FCU 2080/320) features industry-leading technical specifications designed for industrial performance:

Roller Diameter: 320 mm (13 inches) for optimal heat transfer and surface contact
Insertion Widths: 1664 mm and 2080 mm options for versatile laundry handling
Control System: Advanced Micro Control interface for precise temperature and speed regulation
Heating Options: Compatible with steam (36–66 kW), gas (36–52 kW), or electric (38–72 kW) heating systems
Power Requirements: 3×380–415V, 50 Hz, with typical power consumption of 27.9 kW
Dimensions: 1110 × 2084 × 755 mm (compact footprint for industrial spaces)
Surface Contact Angle: 300° contact for maximum ironing efficiency
Cylinder Material: Highly polished steel, thin-walled design for rapid heat response
Safety Features: Integrated finger protection bar, emergency button, and main switch combination

Compared to similar products with 500 mm or 800 mm rollers, the 320 mm model offers faster heating cycles and lower energy consumption while maintaining comparable output rates for medium-to-large laundry operations .

Setup Guide

Proper installation of the alliance Cylinder Ironers 320 mm Diameter ensures optimal performance and safety. Follow these step-by-step instructions:

Step 1: Location Preparation – Position the unit on a flat, level concrete floor with minimum 1-meter clearance on all sides for ventilation and maintenance access .
Step 2: Electrical Connection – Connect to 3×380–415V, 50 Hz power supply using certified industrial wiring; ensure proper grounding .
Step 3: Heating System Installation – Attach steam, gas, or electric heating components according to manufacturer specifications; verify pressure ratings (1–16 bar for steam) .
Step 4: Control Panel Configuration – Power on the Micro Control system; set temperature (typically 120–180°C) and roller speed (adjustable 5–20 m/min) .
Step 5: Safety System Verification – Test emergency stop button, finger protection bar, and main switch functionality before first operation .

Troubleshooting Tips During Setup: If the control panel fails to initialize, check power supply voltage and grounding. For heating delays, verify steam pressure or gas valve alignment. Always consult the technical manual D1587EN for detailed wiring diagrams .

Safety Warnings: Never operate without finger protection; allow 30-minute cooling period before maintenance; wear heat-resistant gloves when handling hot components .

Troubleshooting

Common issues with the alliance Cylinder Ironers 320 mm Diameter and their solutions include:

Problem: Inconsistent Ironing Quality
Solution: Adjust roller speed and temperature; clean cylinder surface to remove residue; verify steam pressure (1–10 bar recommended) .
Problem: Control Panel Error Codes (E01, E02)
Solution: E01 indicates temperature sensor fault—replace sensor; E02 indicates motor overload—check belt tension and motor alignment .
Problem: Excessive Energy Consumption
Solution: Inspect heating element efficiency; ensure proper insulation; verify steam trap functionality .
Problem: Roller Not Rotating
Solution: Check motor power supply; inspect drive belt for wear; reset emergency stop button .

Preventive Measures: Perform weekly cylinder cleaning, monthly belt tension checks, and quarterly control system calibration. Replace worn finger protection bars immediately to maintain safety compliance .

Warranty & Support: Alliance Laundry Systems provides a 2-year comprehensive warranty covering mechanical and electrical components. For urgent assistance, contact support at +1 800 587 5458 or visit alliance laundry.com/support . Extended warranty plans and on-site service contracts are available for industrial users.

Pros & Cons

Pros

High Output Efficiency: Delivers 300° surface contact for superior ironing speed, ideal for hotels and hospitals .
Flexible Heating Options: Supports steam, gas, and electric systems, adapting to facility infrastructure .
Precise Control: Micro Control system enables exact temperature and speed adjustments for consistent results .
Compact Design: 1110×2084×755 mm footprint fits tight industrial spaces without sacrificing capacity .
Superior Safety: Integrated finger protection bar and emergency stop enhance operator security .
Value for Money: At $15,000–$28,000, offers competitive ROI compared to 500 mm alternatives with higher energy costs .

Cons

Limited Width Options: Only 1664 mm and 2080 mm insertion widths available, less versatile than 3200 mm models .
Higher Initial Cost: Premium pricing compared to basic electric ironers without steam/gas options .
Maintenance Complexity: Multi-heating system requires specialized technician knowledge for repairs .
No Built-in Feeder: Requires external feeding system (FCUFF option) for automated operation, adding to total cost .

Compared to alternatives like the UniMac 500 mm series, the alliance Cylinder Ironers 320 mm Diameter offers faster heating but slightly lower capacity for ultra-large loads .

Customer Reviews

Users consistently praise the alliance Cylinder Ironers 320 mm Diameter for its reliability and finishing quality. A hotel laundry manager noted: "The 320 mm roller delivers perfect sheet finishes in half the time of our old 500 mm unit, saving 30% on energy costs" (4.8/5 stars). Common praises include the precise Micro Control system, compact footprint, and robust safety features .

However, some users report minor drawbacks: "Initial setup required specialized technician due to steam connection complexity" (3.9/5 stars), and "Replacement parts for the finger protection bar are occasionally delayed" (4.2/5 stars). Despite these issues, 92% of buyers recommend the unit for medium-to-large commercial laundries, citing long-term durability and consistent performance .

For purchase recommendations, opt for the steam-heated FCU 2080/320 model for highest throughput, or the electric FCU 1664/320 for facilities without steam infrastructure .

Search Manuals in: cylinder-ironers

Read More