Introduction of Owltra Electric Rodent Trap ERZ-20

The Owltra Electric Rodent Trap ERZ-20 is a state-of-the-art solution for rodent control in residential and commercial settings. This trap offers a humane and effective way to eliminate rats and mice, ensuring peace of mind for property owners. The estimated price range for the ERZ-20 is $120 to $150, and it is now available for purchase.

Detailed Specifications

The Owltra Electric Rodent Trap boasts several key features that make it an exceptional choice for rodent control

Voltage: 110-240V AC
Output voltage: 7000V DC
Door opening: 65 x 50mm (top) and 60 x 40mm (side)
Power consumption: 12W
Indoor/outdoor use: Indoor
Dimensions: 13.5 x 5.5 x 5 inches
Weight: 3.3 lbs
Safety switch: Yes
Bait holder: Yes
LED indicator: Yes

Features

Battery Cover
Electric (Chamber) Top
Power Switch
Two LED Light
Magnetic Buckle
Bait Area
Bottom Chamber
Entrance
Infrared Sensors

Description of Electric Rodent Trap

The Owltra Electric Rodent Trap is designed with user-friendly features, making it easy to set up and monitor. The trap offers dual-entry points, allowing rodents to enter from both the top and side. A sensitive detection system ensures that the trap activates only when a rodent is present, conserving power and reducing the risk of harm to non-target animals. The ERZ-20 incorporates a powerful 7000V DC shock, killing rodents quickly and humanely. Additionally, it features a removable bait holder, making bait replacement convenient and mess-free. The trap also includes a safety switch, preventing accidental shocks, and an LED indicator, notifying users when a rodent has been caught.

HOW TO SETUP

Before adding bait, turn the switch to the OFF ("O") position. [photo 1]
Use only a pea-sized amount of peanut butter in the bait area. DO NOT let the bait touch the metal plate surfaces or the sensor detectors, as it may cause a malfunction. [photo 2]
Close the bait door. Insert 4 "C" batteries and turn the switch to the ON ("I ") position. The green light will flash to indicate the trap has been activated.
Place the trap on a clean, dry surface along a wall. Position the trap so that the entrance is facing away from the wall. [photo 3]
Once a rodent is caught, the green light will flash at 10-second intervals.
If a flashing red light is visible, then the trap is signaling the batteries are nearly drained.
Rodent Disposal: Turn the switch to OFF ("O") and remove the batteries. Properly discard the rodent. [photo 4] Follow the cleaning instructions on the trap or in the manual.

HOW TO CLEAN

Turn the switch OFF ("O") and remove the batteries [photo C1]. Pull and remove the top chamber.
Clean: Use warm water or hydrogen peroxide topical solution and a soft-bristle brush to clean the chamber. DO NOT get any water on the electronic top. [photo C2]
Dry: Air dry the interior and exterior chamber completely. Dry hands thoroughly.If the bottom housing is not completely dry, the trap may flash both green and red, and the trap will not work properly.
Reassemble: Attach the top back into place.
Reset the trap following the HOW TO SET UP steps 1-4

The trap with dual-infrared sensor design protects children and pets from accidentally triggering the trap. It generates a high-voltage shock when rodents enter the trap a for 100% success in killing the rat quickly, humanely, and safely.
BATTERIES
Use 4 "C" alkaline batteries. Insert and remove batteries, as indicated in the instructions. Rechargeable batteries should be removed from the device before charging. Different types of batteriesnew or used-should not be mixed, as it may reduce performance or damage the device. Batteries should be inserted with the correct polarity, as indicated in the battery compartment. Exhausted batteries should be removed from the trap and safely recycled. Remove the batteries if the trap will be stored unused for a long period. The supply terminals are not to be short-circuited.

Troubleshooting

Common issues and solutions for the Electric Rodent Trap ERZ-20

The trap does not activate: Ensure that the trap is properly assembled, and the safety switch is turned on. Check the bait holder for proper bait placement. If the issue persists, contact Owltra's customer support.
The trap activates frequently without a rodent: The trap may be too sensitive. Adjust the sensitivity setting if available or relocate the trap to a more secluded area with fewer false triggers.
The LED indicator does not turn on: Check the power source and ensure that the trap is securely plugged in. If the issue continues, contact Owltra for further assistance.

Pros & Cons of Owltra ERZ-20

Pros

Humane and effective rodent control
Dual-entry points for increased catch rates
Power-saving design
Safety switch and LED indicator for user convenience
Removable bait holder for easy maintenance

Cons

Indoor use only
Higher cost compared to traditional snap traps
May require frequent bait replacement

Customer Reviews of Owltra Electric Rodent Trap ERZ-20

The Electric Rodent Trap ERZ-20 has received positive feedback from customers, citing its effectiveness and ease of use. However, some users have expressed concerns about the higher cost and the need for frequent bait replacement. Despite this, the ERZ-20 has been praised for its humane and efficient design, making it a popular choice for those seeking a modern solution for rodent control.

Search Manuals in: erz-20

Read More