Hover-1 Electric Scooter Assembly Falcon-1

Introduction

The Hover-1 Electric Scooter Assembly Falcon-1 is a cutting-edge, high-performance electric scooter designed for both commuters and thrill-seekers. With its sleek and durable design, this scooter is built to handle various terrains and conditions. The Falcon-1 is expected to launch in the summer of 2023, with an estimated price range of $499 to $599, making it an affordable yet powerful option in the electric scooter market.

This scooter is ideal for short to medium-distance commutes, recreational rides, and even off-road adventures. It features advanced technology, including a high-capacity battery, a powerful motor, and intuitive controls. Whether you're navigating through city streets or exploring rugged trails, the Falcon-1 is engineered to provide a smooth and exhilarating ride.

HOVER-1 FALCON-1 DIAGRAM

Bucket Seat
Fog Blaster & Mount
Handle Bar (R)
Pedal Mounts
Hook and Loop Strap
Handle Bar (L)
Frame Base
Twist Knob
Frame Extension
Foot Rests
Caster Wheel

Hover-1 Electric Scooter Assembly Falcon-1-product-overview

PARTS LIST

Hover-1 Electric Scooter Assembly Falcon-1-list

FOG BLASTER DIAGRAM

Charging Port
Water Tank Fill Port
Power Button
LED & Sound Effects Button
Fog Vent & LED Lights

USING & MAINTAINING YOUR FOG BLASTER

Before using the Fog Blaster, charge it by connecting the included Charge Cable to the Charging Port and a USB outlet (fig 1.). The red light will be on while charging. When the light turns off, your Fog Blaster is fully charged. Charge for up to 3 hours. Remove the USB plug from its outlet. Next, push and hold down the Water Tank buttons while pouring water into the fill port (fig 2.). Release when filled. Do not overfill!

Hover-1 Electric Scooter Assembly Falcon-1-maintainance

INSTALLING YOUR HOVER-1 FALCON-1

If you have questions or concerns about any of these steps, please feel free to contact our Customer Service Team at www.hover-1.com. A representative will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for installing the Hover-1 Falcon-1 onto your electric scooter. Read this entire manual before riding your Hover-1 Falcon-1.

Your Hover-1 Falcon-1 must be completely assembled before installing it onto your electric scooter. Please refer to the “Assembling your Hover-1 Falcon-1” section for assembling procedures.

Place the pedal mounts onto the footpad sensors of your self-balancing scooter with the front wheel facing forward. Ensure the pedal mounts are centered on the footpad sensors of your scooter as much as possible.
Using two Hook and Loop straps, attach one end of each Hook and Loop strap to the holes on the front of each pedal mount as shown below.
Wrap both hook and loop straps under your self-balancing scooter and attach the ends to the hooks on the back of each pedal mount. The rubber protective straps should be centered underneath the hoverboard, with side B facing the ground. One set of rubber protective straps should come pre-assembled with the hook and loop straps.
WARNING: Do not over-tighten straps when you are assembling your Falcon-1 to your scooter. Ensure that the Falcon-1 is securely attached to the scooter. See the diagram below for the correct fitting.
When fully installed, your Hover-1 Falcon-1 should look like the diagram below.

Hover-1 Electric Scooter Assembly Falcon-1-installation-d

SAFETY PRECAUTIONS

The first rule in safe riding is to use common sense. A Hover-1 Falcon-1 is vulnerable; it cannot protect you in a crash, against impact, or loss of control, the way driving a car can. A Hover-1 Falcon-1 can tip over sideways or pitch you over the front wheel. It moves faster than a typical scooter. It does not have bumpers or airbags as a car does. This section is a guide to safe riding practices for operation. Make sure you are using your Hover-1 Falcon-1 properly.
Different localities and countries have different laws governing riding on public roads, and you should check with local officials to ensure you are complying with these laws.
Hover-1 is not liable for tickets or violations given to riders who do not follow these regulations.

For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and, in some cases, even death.
Obey all local laws, stop signs, pedestrian crosswalks, etc.
If riding with friends and multiple Hover-1 Falcon-1s, ride single file in a straight line.
Have a satisfactory signaling device (bell, horn, etc.) to warn drivers and pedestrians of your approach.
Ride defensively; expect the unexpected
Give pedestrians the right-of-way.
Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
Slow down at all street intersections and look to the left and right before crossing.
Obey all traffic signals.
Always use proper hand signals for turning and stopping. Give signals 100ft before stopping or turning , and always return both hands to the handlebars before stopping or turning.
Watch for cars pulling out into traffic and for the sudden opening of car doors.
Avoid potholes, drainage grates, or other hazards.
Be careful when riding on soft road edges, gravel, sand,d and uneven surfaces. Ride slowly and avoid quick turns when riding on these surfaces.
Never hitch onto other vehicles.
Do not “stunt” ride or race in traffic.
Do not weave in and out of traffic or swerve from side to side.
A crash can put extraordinary stress on Hover-1 Falcon-1 components, possibly causing them to fatigue prematurely. Components suffering from stress fatigue can fail suddenly, causing loss of control or serious injury.
CAUTION: RIDING IN WET WEATHER
It is recommended that you do not ride your Hover-1 Falcon-1 in wet weather as there are electronic components on the f scooter that may be damaged if exposed to water, and stopping distances can be greater than in dry conditions.
1. This product is strictly forbidden to use on roads and highways unless your local laws state otherwise. You must wear a safety helmet, knee and elbow pads,s and other necessary protective gear when riding your Hover-1 Falcon-1.
2. Due to the particularity of the product, the assembly pieces are to be checked before every ride to avoid an accident while riding.
3. Do not make a sharp turns as you may drift and overturn the Hover-1 Falcon-1, which can result in injury to yourself and/or damage the unit.
4. Do not operate near swimming pools or other bodies of water.

Specification

Motor: 350W Brushless Motor
Battery: 36V 7.5Ah Lithium-Ion Battery
Top Speed: Up to 15.5 MPH
Range: Up to 17 Miles on a Single Charge
Weight Capacity: 264 lbs
Brakes: Dual Braking System (Electric and Mechanical)
Tires: 8.5" Pneumatic Tires
Dimensions: 42.5" x 17.3" x 46.5" (Folded: 42.5" x 17.3" x 19.3")

Troubleshooting

If you encounter any issues with your Hover-1 Electric Scooter Assembly Falcon-1, here are some common problems and solutions:

Non-responsive throttle: Check for loose connections between the throttle and the battery. Ensure the battery is fully charged.
Brake malfunction: Inspect the brake cables for any damage or misalignment. Adjust or replace as necessary.
LED display issues: Restart the scooter by turning it off and then on again. If the issue persists, contact customer support.

Always follow safety instructions and warnings provided in the user manual to avoid accidents and ensure proper use of the scooter.

Pros & Cons

Pros:

High-performance motor for swift and powerful rides
Long-lasting battery life with up to 17 miles of range
Ergonomic design for comfort and stability
Dual braking system for enhanced safety
Portable and foldable design for easy storage and transport

Cons:

Weight capacity may be limiting for heavier riders
Noisy operation at high speeds
Some users may find the assembly process complex

Customer Reviews

Customers have praised the Hover-1 Electric Scooter Assembly Falcon-1 for its impressive speed, comfortable ride, and durable construction. However, some users have noted that the assembly process can be challenging and that the scooter may be too heavy for younger riders to handle.

Search Manuals in: falcon-1

Read More